Instructions / Assembly

maintenance
10
CHECK
BEFORE
FIRST USE
BEFORE
EACH USE
EVERY 90
DAYS
Take the time to read and understand these
operating instructions in order to understand your 5X
and its operations.
Read and understand your drill/driver operator’s
manual and instructions.
Inspect the 5X for damage. Replace any damaged
parts immediately. If a part must be replaced, contact
Trailer Valet Customer Service 844-846-9344.
If you plan to keep the device attached to the trailer
after each use, you must restore the rotation and
stow pins to ensure the unit does not swing against
the trailer tongue.
Keep the device free from contaminants. Remove
any dirt and debris from moving parts.
Apply multipurpose grease to the chain by removing
the front cover of the device.
Apply multipurpose grease to the gear bushings.
Additional Tips:
• The Trailer Valet 5X is made of high strength steel and given a powder coat nish made to
resist corrosion. However, if the device is used in a marine environment or where road salt
is encountered, rinse o the interior and exterior with fresh water and allow to dry. DO NOT
SUBMERGE THE 5X as this can damage the gears and erode lubricants.
• After each use, wipe exterior surfaces with a clean cloth.