TM-22752 TM-22753 Digitale und analoge Wagenbeleuchtung Benutzerhandbuch
© 2011 BioDigit Ltd. Alle Rechte vorbehalten. Die Vervielfältigung und/oder Veröffentlichung der Inhalte des vorliegenden Dokuments in jeglicher Form, einschließlich der elektronischen und mechanischen Form, ohne die schriftliche Genehmigung von BioDigit Ltd. ist verboten. Sicherheitshinweis Während der Bedienung und des Betriebs des Geräts müssen die angegebenen technischen Daten bzw. Vorgaben zu jeder Zeit eingehalten werden. Bei der Installation muss die Umgebung im höchsten Maße berücksichtigt werden.
Funktionen und Eigenschaften • • • • • • • • Zur Nutzung bei digitalen und analogen Systemen Spannungsunabhängige, konstante Lichtintensität Kann mit allen Funktionen verbunden werden Detaillierte DCC CV-Programmierung Langsamer Ein/Aus-Lichteffekt Kann durch den Nutzer auf Größe zugeschnitten werden Mit Warmlicht- und Kaltlicht- LEDs Niedriger Stromverbrauch im Standby Technikparameter Anschlussspannung: 7 – 24 V/DCC Stromverbrauch im Standby: 10 mA Maximaler Stromverbrauch: 100 mA Maße: 250 x 7mm Kurzb
17 18 29 113 114 lange Adresse MSB lange Adresse LSB Settings 0/32: Short/Long address Helligkeit Funktions Nummer 0-255 0-7 0-255 0 0 0 0-255 1-16 200 4 * Schreiben Sie Wert 8 zu CV 8 zur Wiederherstellung der Standardeinstellungen. Zur Programmierung von Langadressen (>127) kann die Adresse des Decoders mittels zweier CVs eingestellt werden. Z. B.
Garantie und rechtliche Hinweise Jeder Parameter des Geräts wurde vor der Vermarktung einer umfassenden Überprüfung unterzogen. Der Hersteller gewährt für dieses Produkt eine Garantie von einem Jahr. Die in diesem Zeitraum entstehenden Schäden werden vom Hersteller gegen Vorlage der Rechnung kostenlos repariert. Die Garantie wird in Fällen von unsachgemäßer Verwendung und/oder Handhabung ungültig.
Abbildung 1
TM-22752 TM-22753 Digital and analog carriage light User's manual
© 2011 BioDigit Ltd. All rights reserved. It is forbidden to reproduce and/or publish the contents of the present document in any form including electronic and mechanical design without the written permission of BioDigit Ltd. Safety warning During the operation of the device the specified technical parameters shall always be met. At the installation the environment shall be fully taken into consideration. The device must not be exposed to moisture and direct sunshine.
Features and properties • • • • • • • • Applicable on digital and analog systems Voltage independent constant light intensity It can be associated to any functions Detailed DCC CV-programming Slow on/off light effect Can be cut as required by the user With cold or warm white LEDs Low idle mode current consumption Technical parameters Supply voltage: 7 - 24 V/DCC Idle mode current consumption: 10 mA Max.
17 18 29 113 114 Extended address MSB Extended address LSB Settings 0/32: Short/Long address Light intensity Function number 0-255 0-7 0-255 0 0 0 0-255 1-16 200 4 * Write value 8 to CV 8 to reset factory default values. At programming for long addresses (>127) the address of the decoder can be set by means of two CVs. E.g. the required address: 5391 5391 / 256 = 21 with remainder 15 CV17 = 21 CV18 = 15 Cutting to size Cutting to size can be performed at the points indicated in Figure 1.
Guarantee and legal statement Each parameter of the device was submitted to extensive testing prior to marketing. The manufacturer undertakes one year guarantee for the product. Defects occurred during this period will be repaired by the manufacturer free of charge against the presentation of the invoice. The validity of the guarantee will cease in case of improper usage and/or treatment. Attention! By virtue of the European EMC directive the product can be used solely with devices provided with CE marking.
Figure 1