User manual

3
17 Extended address MSB 0-255 0
18 Extended address LSB 0-7 0
29 Settings
0/32: Short/Long address
0-255 0
113 Light intensity 0-255 200
114 Function number 1-16 4
* Write value 8 to CV 8 to reset factory default values.
At programming for long addresses (>127) the address of the
decoder can be set by means of two CVs.
E.g. the required address: 5391
5391 / 256 = 21 with remainder 15
CV17 = 21
CV18 = 15
Cutting to size
Cutting to size can be performed at the points indicated in Figure
1. Care shall be taken not to damage the circuit; use straight, firm
movements for cutting.
Installation
The module shall be fixed to the ceiling of the carriage frame by
double-sided adhesive tape.
The wheel collector of the carriage is connected to the points
"POWER".
An external capacitor ensuring constant LED light, can be
connected to the soldering points "GOLDCAP". Take care of the
polarity of the capacitor!
Proposed capacitor values:
470uF/35V or 1000uF/35V (included!)