Split System Cooling Product Data XL16i 4TTX6024, 036, 048 & 060E 2, 3, 4 & 5 Tons PUB. NO.
Features and Benefits • Climatuff™ 2-stage scroll • Internal compressor high/low • • • • • • • • • • © 2010 Trane compressor Efficiency up to 18.
Contents Features and Benefits 2 General Data 4 Product Specifications A-weighted Sound Power Level [dB(A)] Accessory Description and Usage AHRI Standard Capacity Rating Conditions Model Nomenclature Electrical Data Dimensions Mechanical Specifications 22-1752-10 3 4 4 5 5 6 7 8 9
General Data Product Specifications Model No. 1 4TTX6024E1 Electrical Data V/Ph/Hz 2 230/1/60 Min Cir Ampacity 14 Max Fuse Size (Amps) 20 Compressor CLIMATUFF® - SCROLL RL AMPS - LR AMPS 10.3 - 52 Outdoor Fan FL Amps 0.74 Fan HP 1/8 Fan Dia (inches) 27.6 Coil Spine Fin™ Refrigerant R-410A 9/13-LB/OZ Line Size - (in.) O.D. Gas 3 5/8 Line Size - (in.) O.D. Liquid 3 3/8 Dimensions H x W x D (Crated) 53.4 x 35.1 x 38.
General Data Accessory Description and Usage AHRI Standard Capacity Rating Conditions Rubber Isolators — 5 rubber donuts to isolate condensing unit from mounting frame or pad. Use on any application where sound transmission needs to be minimized. AHRI STANDARD 210/240 RATING CONDITIONS — (A) Cooling 80°F DB, 67°F WB air entering indoor coil, 95°F DB air entering outdoor coil. (B) High Temperature Heating 47°F DB, 43°F WB air entering outdoor coil, 70°F DB air entering indoor coil.
Model Nomenclature Outdoor Units Gas Furnaces 4 T T X 6 0 3 6 E 1 0 0 0 A A T U D 2 B 0 8 0 A C V 3 2 A A Refrigerant Type 4 = R-410A TRANE Product Type W = Split Heat Pump T = Split Cooling Product Family Z = Leadership – Two Stage X = Leadership R = Replacement/Retail M or B = Basic A = Light Commercial Family SEER 3 = 13 6 = 16 4 = 14 8 = 18 5 = 15 9 = 19 0 = 20 Split System Connections 1-6 Tons 0 = Brazed Nominal Capacity in 000s of BTUs Major Design Modifications Power Supply 1 = 200-230/1/60 or
Electrical Data Schematic Diagrams (SEE LEGEND) 4TTX6024E, 036E Printed from D156630P02 Rev 00 22-1752-10 7
Electrical Data Schematic Diagrams (SEE LEGEND) 4TTX6048E, 060E 8 22-1752-10
Electrical Data Schematic Diagrams LEGEND 22-1752-10 9
Dimensions 4TTX6 Outline Drawing Note: All dimensions are in MM (Inches).
Mechanical Specifications General The 4TTX6 is fully charged from the factory for matched indoor section and up to 15 feet of piping. This unit is designed to operate at outdoor ambient temperatures as high as 115°F. Cooling capacities are matched with a wide selection of air handlers and furnace coils that are AHRI certified. The unit shall be certified to UL 1995. Exterior is designed for outdoor application.
10/10 Trane www.trane.com Trane has a policy of continuous product and product data improvement and it reserves the right to change design and specifications without notice.
