Installation and Maintenance Manual

Maintenance

36 GKND-SVX01B-EN

• Remove the Blower Wheel (Item 9) from the motor

shaft by removing the set screw (Item 14) using a 1/8-in.

Allen Wrench.

• Remove the three Motor Mounting Nuts (Item 5),

Space Washers (Item 11), and Screws (Item 12). Do not

lose these parts! Using caution—the motor will

disengage from the Mounting Adapter Plate, along

with the Relay Junction Box and Pressure Switch

Mounting Brackets will also disengage.

• Reverse order to install the new Power Venter Motor.

• TEST FIRE THE UNIT FOR A FEW CYCLES, MAKING

SURE THAT THE UNIT IS OPERATING

SATISFACTORILY.

How to Order Replacement Parts

Please send the following information to your local Parts

center; If further assistance is needed, contact the

manufacturer’s customer service department.

•Model number

• Serial Number

• Part description and Number as shown in the

eplacement Parts Catalog.