Packaged Cooling with Electric Heat Rooftop Units Precedent ™ 3 - 10Tons — 60 Hz March 2003 RT-PRC005-EN
Introduction PrecedentTM . . . The same Trane quality... with added flexibility. Precedent is a flexible line of packaged units that covers a wide variety of applications. Electromechanical controls are available for simpler applications, and for the more sophisticated, ReliaTel™ microprocessor controls. In addition to controls, Precedent offers many other outstanding features and option choices. © 2003 American Standard Inc.
Contents Introduction Features and Benefits 2 Application Considerations 8 Selection Procedure 9 4 Model Number Description General Data 10 11 Performance Data 15 Cooling Performance Fan Performance Heat Performance RT-PRC005-EN Controls 15 26 47 49 Electric Power 50 Dimension and Weights 64 Mechanical Specifications 73 3
Features and Benefits Easy Access Panels Remove two screws for access to the standardized internal components and wiring. Easy-Adjust Idler Arm With the Easy-Adjust Idler Arm, the belt and sheaves on belt drive units can be quickly adjusted without moving the mounted fan motor.The result is a major savings in time and money. Unit Cabinet Patented Condenser Coil Precedent boasts a patented 1+1+1 Hybrid coil, permanently gapped for easy of cleaning.
Features and Benefits Standardized Components • Requires no special tools to run the Precedent unit through its paces during testing. Simply place a jumper between Test 1 andTest 2 terminals on the Low VoltageTerminal Board and the unit will walk through its operational steps.The unit automatically returns control to the zone sensor after stepping through the test mode a single time, even if the jumper is left on the unit. • Components are placed in the same location on all Precedent™ units.
Features and Benefits Factory-installed Options Dehumidification (Hot Gas Reheat) Option Economizer This option allows for increased outdoor air ventilation. It reduces humidity levels while increasing comfort level in the air space. Cooling can operate without a demand for dehumidification.The hot gas reheat coil is designed to deliver maximum reheat temperatures and pivot to allow for easy access cleaning.
Features and Benefits Quality And Reliability Testing • All Precedent™ designs were rigorously rain tested at the factory to ensure water integrity. • Actual shipping tests were performed to determine packaging requirements. Units were test shipped around the country to determine the best packaging. • Factory shake and drop tests were used as part of the package design process to help assure that the unit arrives at the job site in top condition. • We perform a 100% coil leak test at the factory.
Application Considerations Application of this product should be within the cataloged airflow and cooling considerations. Low Ambient Cooling The Precedent™ line features, with ReliaTel™ microprocessor controls, low ambient cooling down to 0F. With electromechanical controls, Precedent features low ambient cooling to 40F. Contact your localTrane Representative for more assistance with low ambient cooling applications.
Selection Procedure Cooling Capacity Step 1 Calculate the building’s total and sensible cooling loads at design conditions. Use theTrane calculation methods or any other standard accepted method. Factors used in unit selection: A Total Cooling Load: 59 MBh B Sensible Cooling Load: 40 MBh C Airflow: 2000 cfm D Electrical Characteristics: 460/60/3 E Summer Design Conditions: Entering Evaporator Coil: 80 DB, 67 WB Outdoor Ambient: 95 F External Static Pressure: 0.45 in.
Model Number Description T S C 036 A 3 R B 1 2 3 4,5,6 7 8 9 10 11 12,13 14 15 16 17 A ** DIGIT 1 - Unit Function T = DX Cooling DIGIT 11 - Minor Design Sequence A = First Sequence DIGIT 2 - Efficiency S = Standard Efficiency H = High Efficiency DIGITS 12, 13 - Service Sequence **= Factory Assigned DIGIT 3 - Airflow C = Convertible DIGITS 4,5,6 - Nominal Gross Cooling Capacity (MBh) 036 = 3Ton 048 = 4Ton 060 = 5Ton 072 = 6Ton 090 = 7½ Ton, Single Compressor 092 = 7½ Ton, Dual Compressor 10
General Data (3 - 5 Ton) Standard Efficiency Table GD - 1 — General Data 3Ton Convertible Units TSC036A1, A3, A4, AW Cooling Performance1 Gross Cooling Capacity SEER2 Nominal CFM / ARI Rated CFM ARI Net Cooling Capacity System Power (kW) Compressor No./Type Outdoor Sound Rating (dB)3 Outdoor Coil —Type Tube Size (in.) O.D. Face Area (sq ft) Rows/FPI Indoor Coil —Type Tube Size (in.) Face Area (sq ft) Rows/FPI Refrigerant Control Drain Connection No./Size (in.) Outdoor Fan —Type No. Used/Diameter (in.
General Data (6 - 10 Ton) Standard Efficiency Table GD - 2— General Data 6Ton Convertible Units TSC072A3, A4, AW, AK Cooling Performance1 Gross Cooling Capacity EER2 Nominal CFM / ARI Rated CFM ARI Net Cooling Capacity Integrated Part Load Value (IPLV)3 System Power (kW) Compressor No./Type Outdoor Sound Rating (dB)4 Outdoor Coil —Type Tube Size (in.) O.D. Face Area (sq ft) Rows/FPI Indoor Coil —Type Tube Size (in.) Face Area (sq ft) Rows/FPI Refrigerant Control Drain Connection No./Size (in.
General Data (3 - 5 Ton) High Efficiency Table GD - 3 — General Data 3Ton Convertible Units THC036A1,A3,A4,AW Cooling Performance1 Gross Cooling Capacity 38,000 SEER / EER2 12.5/— Nominal CFM / ARI Rated CFM 1,200/1,200 ARI Net Cooling Capacity 36,600 System Power (kW) 3.33 Compressor No./Type 1/Climatuff Scroll Outdoor Sound Rating (dB)3 83 Outdoor Coil —Type Lanced Tube Size (in.) O.D. 0.3125 Face Area (sq ft) 7.19 Rows/FPI 2/17 Indoor Coil —Type Lanced Tube Size (in.) 0.3125 Face Area (sq ft) 6.
General Data (6 - 10 Ton) High Efficiency Table GD - 4— General Data 6Ton Convertible Units THC072A3, A4, AW Cooling Performance1 Gross Cooling Capacity EER2 Nominal CFM / ARI Rated CFM ARI Net Cooling Capacity Integrated Part Load Value (IPLV)3 System Power (kW) Compressor No./Type Outdoor Sound Rating (dB)4 Outdoor Coil —Type Tube Size (in.) O.D. Face Area (sq ft) Rows/FPI Indoor Coil —Type Tube Size (in.) Face Area (sq ft) Rows/FPI Refrigerant Control Drain Connection No./Size (in.
Performance Data (3, 4 Ton) Standard Efficiency Table PD-1 — Gross Cooling Capacities (MBH) 3 Ton Single/Three Phase TSC036A1, A3, A4, AW 85 CFM Airflow 1080 1200 1320 1440 Enter. Dry Bulb 61 (F) MBH SHC 75 34.6 29.0 80 35.6 35.0 85 37.6 37.6 90 39.3 39.3 75 35.6 30.9 80 36.7 36.7 85 38.7 38.7 90 40.2 40.2 75 36.4 32.6 80 37.7 37.7 85 39.4 39.4 90 40.8 40.8 75 37.0 34.1 80 38.4 38.4 85 40.0 40.0 90 41.4 41.4 67 MBH SHC 38.6 22.3 38.8 27.3 39.2 32.5 39.7 37.6 39.0 22.8 39.3 28.4 39.7 33.9 40.4 39.
Performance Data (4, 5 Ton) Standard Efficiency Table PD-3 — Gross Cooling Capacities (MBH) 4 Ton Three Phase TSC048A3, A4, AW 85 CFM Airflow 1440 1600 1760 1920 Enter. Dry Bulb 61 (F) MBH SHC 75 44.8 38.6 80 46.0 46.0 85 49.6 49.6 90 52.5 52.5 75 46.1 41.1 80 48.1 48.1 85 51.4 51.4 90 54.2 54.2 75 47.2 43.5 80 49.7 49.7 85 52.8 52.8 90 55.5 55.5 75 48.2 45.8 80 51.0 51.0 85 53.9 53.9 90 56.6 56.6 67 MBH SHC 51.4 29.8 51.6 37.4 52.0 44.8 52.9 52.2 52.1 31.1 52.4 39.3 53.0 47.3 54.2 54.2 52.8 32.
Performance Data Table PD-5 — Gross Cooling Capacities (MBH) 6 Ton Three Phase 85 CFM Airflow 2160 2400 2640 2880 Enter. Dry Bulb 61 (F) MBH SHC 75 65.9 55.0 80 67.6 66.2 85 71.4 71.4 90 74.6 74.6 75 67.7 58.3 80 69.7 69.7 85 73.4 73.4 90 76.2 76.2 75 69.1 61.4 80 71.6 71.6 85 74.8 74.8 90 77.4 77.4 75 70.2 64.1 80 72.9 72.9 85 75.9 75.9 90 78.3 78.3 67 MBH SHC 73.4 43.5 73.7 52.2 74.2 61.9 75.3 71.3 74.0 43.8 74.6 54.1 75.3 64.5 76.5 74.3 74.7 44.9 75.3 55.8 76.1 66.8 77.5 76.8 75.2 45.8 75.9 57.
Performance Data (7½, 8½ Ton) Standard Efficiency Table PD-7 — Gross Cooling Capacities (MBH) 7½ Ton Three Phase Dual Compressors CFM Airflow 2700 3000 3300 3600 85 Enter. Dry Bulb 61 67 73 (F) MBH SHC MBH SHC MBH SHC 75 84.6 72.9 93.9 55.3 98.4 36.4 80 86.8 86.8 94.4 68.5 99.6 50.0 85 92.2 92.2 95.4 81.7 100.8 61.3 90 96.3 96.3 96.9 94.4 102.0 72.8 75 86.8 77.5 94.7 57.0 98.9 37.1 80 90.1 90.1 95.6 71.2 100.2 50.8 85 94.7 94.7 96.8 85.3 101.4 62.7 90 98.3 98.3 98.3 98.3 102.7 74.8 75 88.7 81.9 95.
Performance Data (10 Ton) Standard Efficiency Table PD-9 — Gross Cooling Capacities (MBH) 10 Ton Three Phase TSC120A3, A4, AW, AK 85 CFM Airflow 3600 4000 4400 4800 Enter. Dry Bulb 61 67 73 (F) MBH SHC MBH SHC MBH SHC 75 109.2 95.1 119.3 71.0 123.3 46.1 80 112.4 112.4 119.9 86.9 124.6 64.8 85 118.2 118.2 121.2 103.4 126.2 76.0 90 122.6 122.6 122.9 119.0 127.7 89.9 75 112.0 101.1 120.4 72.8 123.8 46.9 80 115.8 115.8 121.6 90.8 125.3 63.0 85 120.6 120.6 123.1 108.3 126.9 77.4 90 124.5 124.5 124.9 124.
Performance Data (3, 4 Ton) High Efficiency Table PD-10 — Gross Cooling Capacities (MBH) 3 Ton THC036A1, A3, A4, AW AmbientTemperature (F) 85 CFM Airflow 1080 1200 1320 1440 Enter. Dry Bulb 61 (F) MBH SHC 75 34.2 29.2 80 34.9 34.9 85 37.9 37.9 90 40.5 40.5 75 35.3 31.2 80 36.7 36.7 85 39.6 39.6 90 41.9 41.9 75 36.2 33.2 80 38.2 38.2 85 40.8 40.8 90 42.9 42.9 75 37.1 35.1 80 39.4 39.4 85 41.7 41.7 90 43.7 43.7 67 MBH SHC 39.8 22.7 40.0 28.5 40.3 34.3 40.9 40.0 40.4 23.7 40.7 30.0 41.1 36.3 41.9 41.
Performance Data (5 Ton) High Efficiency Table PD-12 — Gross Cooling Capacities (MBH) 5 Ton Single Phase THC060A1 AmbientTemperature (F) 85 CFM Airflow 1800 2000 2200 2400 105 115 Enter. Dry Entering Wet Bulb (F) Bulb 61 67 73 61 67 73 61 67 73 61 67 73 (F) MBH SHC MBH SHC MBH SHC MBH SHC MBH SHC MBH SHC MBH SHC MBH SHC MBH SHC MBH SHC MBH SHC MBH SHC 75 80 85 90 75 80 85 90 75 80 85 90 75 80 85 90 56.2 57.6 62.2 65.8 57.8 60.3 64.4 67.6 59.4 62.4 66.0 68.9 60.6 64.0 67.2 69.8 48.2 57.6 62.2 65.
Performance Data Table PD-14 — Gross Cooling Capacities (MBH) (5 Ton) High Efficiency 5Ton THC060A3, A4, AW – Dehumidification Option AmbientTemperature (F) 85 95 105 115 Enter. Dry Bulb 61 (F) MBH SHC 75 50.7 36.2 80 50.8 41.8 85 51.0 47.5 90 52.2 52.2 67 MBH SHC 57.0 29.4 57.1 35.1 57.2 40.7 57.4 46.3 73 MBH SHC 63.7 22.6 63.8 28.2 64.0 33.8 64.1 39.4 61 MBH SHC 48.1 34.6 48.3 40.2 48.6 45.9 50.1 50.1 67 MBH SHC 54.2 27.9 54.4 33.5 54.5 39.1 54.6 44.
Performance Data (6, 7½ Ton) High Efficiency Table PD-15 — Gross Cooling Capacities (MBH) 6Ton Three Phase THC072A3, A4, AW 85 CFM Airflow 2160 2400 2640 2880 Enter. Dry Bulb 61 (F) MBH SHC 75 67.3 56.6 80 68.7 68.2 85 72.2 72.2 90 74.7 74.7 75 69.0 60.1 80 70.7 70.7 85 73.8 73.8 90 75.6 75.6 75 70.3 63.2 80 72.3 72.3 85 74.7 74.7 90 76.1 76.1 75 71.3 65.8 80 73.3 73.3 85 75.1 75.1 90 76.3 76.3 67 MBH SHC 73.6 42.5 73.8 51.7 74.5 61.4 75.3 70.6 74.0 43.3 74.3 52.9 75.0 63.0 75.9 72.4 74.2 43.9 74.
Performance Data (8½, 10 Ton) High Efficiency Table PD-17 — Gross Cooling Capacities (MBH) 8½ Ton Three Phase THC102A3, A4, AW AmbientTemperature (F) 95 85 CFM Airflow 3060 3400 3740 4080 Enter. Dry Bulb 61 67 73 (F) MBH SHC MBH SHC MBH SHC 75 94.0 81.8 105.7 62.8 110.8 40.9 80 96.9 96.9 106.2 77.6 112.0 56.0 85 103.5 103.5 107.2 92.9 113.2 68.7 90 108.4 108.4 109.0 107.7 114.4 81.6 75 96.6 87.2 107.1 64.7 111.4 41.5 80 100.9 100.9 107.7 81.0 112.7 56.9 85 106.6 106.6 108.9 97.4 114.0 70.2 90 110.
Performance Data Table PD-19— Gross Cooling Capacities (MBH) (10 Ton) High Efficiency 10Ton THC120A3, A4, AW – Dehumidification Option AmbientTemperature (F) 85 CFM Airflow 2000 Enter. Dry Bulb 61 (F) MBH SHC 75 94.2 68.9 80 94.4 79.8 85 93.0 93.0 90 98.0 97.2 67 MBH SHC 105.8 56.2 106.0 66.8 106.3 77.6 106.4 88.3 95 73 MBH SHC 118.4 42.6 118.6 53.6 118.8 64.3 119.0 75.0 61 MBH SHC 89.7 66.2 89.9 77.1 90.4 86.3 94.4 94.4 67 MBH SHC 101.0 53.6 101.2 64.1 101.4 74.9 101.6 85.
Performance Data (3, 4, 5 Ton) Standard Efficiency Table PD-20— Direct Drive Evaporator Fan Performance 3, 4 and 5 Ton TSC036A, TSC048A, TSC060A Tons 3 4 5 3 4 5 Unit Model No.
(3 Ton) Performance Data Standard Efficiency Table PD-21 — Belt Drive Evaporator Fan Performance — 3 Ton — TSC036A3,A4,AW — Downflow Airflow CFM 960 1080 1200 1320 1440 .10 RPM BHP — — — 552 588 — — — 0.18 0.23 External Static Pressure (Inches of Water) .40 .50 .60 .70 RPM BHP RPM BHP RPM BHP RPM BHP .20 RPM BHP .30 RPM BHP 528 557 588 622 657 1-HP Standard Motor & Field Supplied Low Static Drive (1) 599 0.16 658 0.20 625 0.19 685 0.24 652 0.23 712 0.28 681 0.27 738 0.32 713 0.33 765 0.37 0.
(4 Ton) Performance Data Standard Efficiency Table PD-23 — Belt Drive Evaporator Fan Performance — 4 Ton — TSC048A3,A4,AW — Downflow Airflow CFM 1280 1440 1600 1760 1920 .20 RPM BHP — 596 647 701 755 1-HP Standard Motor & Field Supplied Low Static Drive (1) 616 0.22 677 0.26 734 0.31 663 0.29 719 0.33 772 0.38 711 0.37 764 0.42 813 0.47 758 0.46 811 0.52 856 0.58 807 0.57 859 0.64 903 0.71 — 0.23 0.31 0.41 0.52 .30 RPM BHP External Static Pressure (Inches of Water) .40 .50 .60 .
Performance Data (5 Ton) Standard Efficiency Table PD-25— Belt Drive Evaporator Fan Performance — 5 Ton — TSC060A3,A4,AW — Downflow Airflow CFM 1600 1800 2000 2200 2400 .20 RPM BHP 674 743 813 886 959 1-HP Standard Motor & Field Supplied Low Static Drive (1) 735 0.39 786 0.45 835 0.50 801 0.52 849 0.59 894 0.65 866 0.68 914 0.76 956 0.83 933 0.87 980 0.96 1019 1.03 1000 1.10 1045 1.19 1085 1.28 0.33 0.46 0.61 0.80 1.03 .30 RPM BHP External Static Pressure (Inches of Water) .40 .50 .60 .
Performance Data (6 Ton) Standard Efficiency Table PD-27 — Belt Drive Evaporator Fan Performance — 6-Ton — TSC072A3,A4,AW — Downflow Airflow CFM .10 RPM BHP .20 RPM BHP .30 RPM BHP 1920 2160 2400 2640 2880 1-HP Standard Motor & Field Supplied Low Static Drive (1) — — — — 573 0.34 — — 548 0.35 602 0.42 — — 584 0.45 635 0.52 569 0.47 621 0.56 670 0.64 612 0.60 660 0.69 706 0.78 External Static Pressure (Inches of Water) .40 .50 .60 .70 RPM BHP RPM BHP RPM BHP RPM BHP .80 RPM BHP .90 RPM BHP 1.
(6 Ton) Performance Data Standard Efficiency Table PD-29 — Belt Drive Evaporator Fan Performance — 6-Ton — TSC072,AK — Downflow Airflow .10 CFM RPM 1920 2160 2400 2640 2880 569 612 .20 BHP RPM .30 BHP RPM BHP External Static Pressure (Inches of Water) .40 .50 .60 .70 RPM BHP RPM BHP RPM BHP RPM BHP 2-HP Standard Motor & Field Supplied Low Static Drive (1) 573 0.34 630 0.41 680 548 0.35 602 0.42 656 0.50 706 584 0.45 635 0.52 682 0.60 732 0.47 621 0.56 670 0.64 715 0.72 758 0.60 660 0.69 706 0.
(7½ Ton) Performance Data Standard Efficiency Table PD-31 — Belt Drive Evaporator Fan Performance — 7½-Ton — TSC090,092A3,A4,AW,AK — Downflow Airflow CFM .10 RPM BHP .20 RPM BHP 2400 2700 3000 3300 3600 — — 656 713 771 — 652 703 755 809 — — 0.71 0.93 1.19 .30 RPM BHP External Static Pressure (Inches of Water) .40 .50 .60 .70 RPM BHP RPM BHP RPM BHP RPM BHP 2-HP Standard Motor & Field Supplied Low Static Drive (1) — 652 0.54 701 0.63 750 0.72 794 0.81 0.63 699 0.70 743 0.79 787 0.89 830 0.99 0.
Performance Data (8½ Ton) Standard Efficiency Table PD-33— Belt Drive Evaporator Fan Performance — 8½-Ton — TSC102A3,A4,AW, AK —DownflowAirflow CFM 2720 3060 3400 3740 4080 .10 RPM BHP — — — 622 671 — — — 0.76 0.96 External Static Pressure (Inches of Water) .40 .50 .60 .70 RPM BHP RPM BHP RPM BHP RPM BHP .20 RPM BHP .30 RPM BHP — — 612 659 706 2-HP Standard Motor & Field Supplied Low Static Drive (1) — — 613 0.60 655 0.72 611 0.64 650 0.74 688 0.85 651 0.79 689 0.91 724 1.02 693 0.97 729 1.
Performance Data (10 Ton) Standard Efficiency Table PD-35 — Belt Drive Evaporator Fan Performance — 10-Ton — TSC120A3,A4,AW,AK — Downflow Airflow CFM 3200 3600 4000 4400 4800 .10 RPM BHP — — — 741 803 — — — 1.27 1.62 External Static Pressure (Inches of Water) .40 .50 .60 .70 RPM BHP RPM BHP RPM BHP RPM BHP .20 RPM BHP .30 RPM BHP — — 715 773 833 3-HP Standard Motor & Field Supplied Low Static Drive (1) — — — — 718 0.97 — — 731 1.08 764 1.20 747 1.21 782 1.35 814 1.49 803 1.53 834 1.67 864 1.
Performance Data (3, 4, 5Ton) High Efficiency Table PD-37— Direct Drive Evaporator Fan Performance — 3, 4, and 5 Ton — THC036A, THC048A, THC060A Unit Tons Model No.
Performance Data (3 Ton) High Efficiency Table PD-38 — Belt Drive Evaporator Fan Performance — 3 Ton — THC036A3,A4,AW — Downflow Airflow CFM 960 1080 1200 1320 1440 .10 RPM BHP — — — 552 588 — — — 0.18 0.23 External Static Pressure (Inches of Water) .40 .50 .60 .70 RPM BHP RPM BHP RPM BHP RPM BHP .20 RPM BHP .30 RPM BHP 528 557 588 622 657 1-HP Standard Motor & Field Supplied Low Static Drive (1) 599 0.16 658 0.20 625 0.19 685 0.24 652 0.23 712 0.28 681 0.27 738 0.32 713 0.33 765 0.37 0.12 0.
Performance Data (4 Ton) High Efficiency Table PD-40 — Belt Drive Evaporator Fan Performance — 4 Ton — THC048A3,A4,AW — Downflow Airflow CFM 1280 1440 1600 1760 1920 .20 RPM BHP — 609 661 716 771 1-HP Standard Motor & Field Supplied Low Static Drive (1) 626 0.23 686 0.27 744 0.32 674 0.30 730 0.34 783 0.39 724 0.38 776 0.44 825 0.49 775 0.48 825 0.54 870 0.60 825 0.59 875 0.66 918 0.73 — 0.24 0.32 0.42 0.53 .30 RPM BHP External Static Pressure (Inches of Water) .40 .50 .60 .
Performance Data (5 Ton) High Efficiency Table PD-42— Belt Drive Evaporator Fan Performance — 5 Ton — THC060A3,A4,AW — Downflow Airflow CFM 1600 1800 2000 2200 2400 .20 RPM BHP — 706 773 840 909 1-HP Standard Motor & Field Supplied Low Static Drive (1) 703 0.36 757 0.41 806 0.47 760 0.47 815 0.54 861 0.60 821 0.62 873 0.69 918 0.76 885 0.80 930 0.87 977 0.95 950 1.02 990 1.08 1034 1.16 — 0.42 0.57 0.75 0.96 .30 RPM BHP External Static Pressure (Inches of Water) .40 .50 .60 .
Performance Data (5 Ton) High Efficiency Table PD-44 — Belt Drive Evaporator Fan Performance — 5 Ton — THC060A3,A4,AW — Horizontal Airflow CFM .10 RPM BHP .20 RPM BHP .30 RPM BHP 1600 1800 2000 2200 2400 1-HP Standard Motor & Field Supplied Low Static Drive (1) 707 0.35 774 0.42 837 0.50 778 0.48 840 0.56 897 0.64 850 0.65 908 0.73 961 0.81 923 0.84 978 0.93 1028 1.02 997 1.07 1049 1.17 1096 1.27 External Static Pressure (Inches of Water) .40 .50 .60 .70 RPM BHP RPM BHP RPM BHP RPM BHP .
Performance Data (6 Ton) High Efficiency Table PD-46— Belt Drive Evaporator Fan Performance — 6 Ton — THC072A3,A4,AW* — Downflow Airflow CFM 1920 2160 2400 2640 2880 .20 RPM BHP — — — 589 634 1-HP Standard Motor & Field Supplied Low Static Drive (1) — — 588 0.35 643 0.43 564 0.37 618 0.44 672 0.52 602 0.47 652 0.54 701 0.63 642 0.59 690 0.67 734 0.76 682 0.74 728 0.82 770 0.91 — — — 0.50 0.63 .30 RPM BHP External Static Pressure (Inches of Water) .40 .50 .60 .70 RPM BHP RPM BHP RPM BHP RPM BHP .
Performance Data (7½ Ton) High Efficiency Table PD-48 — Belt Drive Evaporator Fan Performance — 7½-Ton — THC092A3,A4,AW — Downflow Airflow CFM 2400 2700 3000 3300 3600 .10 RPM BHP .20 RPM BHP .30 RPM BHP External Static Pressure (Inches of Water) .40 .50 .60 .70 RPM BHP RPM BHP RPM BHP RPM BHP 2-HP Standard Motor & Field Supplied Low Static Drive (1) — — — — — 583 — — — — — 611 — — — 604 0.61 643 — 599 0.63 639 0.74 678 0.68 640 0.79 675 0.89 713 — — — — 601 0.50 0.60 0.71 0.86 1.
Performance Data (8½ Ton) High Efficiency Table PD-50— Belt Drive Evaporator Fan Performance — 8½-Ton — THC102A3,A4,AW — Downflow Airflow CFM 2720 3060 3400 3400 4080 .10 RPM BHP ---641 693 ---0.81 1.03 .20 RPM BHP --628 677 726 --0.72 0.92 1.15 .30 RPM BHP External Static Pressure (Inches of Water) .40 .50 .60 .70 RPM BHP RPM BHP RPM BHP RPM BHP 2-HP Standard Motor & Field Supplied Low Static Drive (1) 584 0.53 626 0.64 668 0.76 708 0.88 746 1.00 626 0.68 665 0.78 703 0.90 740 1.04 775 1.
Performance Data (10 Ton) High Efficiency Table PD-52— Belt Drive Evaporator Fan Performance — 10-Ton — THC120A3,A4,AW — Downflow Airflow CFM .10 RPM BHP .20 RPM BHP .30 RPM BHP External Static Pressure (Inches of Water) .40 .50 .60 .70 RPM BHP RPM BHP RPM BHP RPM BHP 3200 3600 4000 4400 4800 — — — 764 828 — — 734 795 857 — 714 768 825 884 — 749 803 857 913 — — — 1.36 1.74 — — 1.16 1.49 1.88 — 1.02 1.30 1.63 2.02 — 1.14 1.44 1.79 2.18 .80 RPM BHP .
Performance Data (10 Ton) High Efficiency Table PD-54— Belt Drive Evaporator Fan Performance — 10-Ton — THC120A3,A4,AW —Horizontal Airflow CFM 3200 3600 4000 4400 4800 .10 RPM BHP — 746 822 898 974 — 1.18 1.59 2.09 2.69 .20 RPM BHP .30 RPM BHP External Static Pressure (Inches of Water) .40 .50 .60 .70 RPM BHP RPM BHP RPM BHP RPM BHP 3-HP Standard Motor & Field Supplied Low Static Drive (1) — 748 1.06 787 1.19 824 1.27 811 1.39 849 1.54 883 1.70 879 1.81 912 1.95 946 2.21 950 2.32 977 2.46 1008 2.
Performance Data Table PD-56— Standard Motor & Sheave/Fan Speed (Rpm) Tons 3 4 5 6 7½ 8½ 10 Unit Model No. T#C036A T#C048A T#C060A T#C072A TSC090,092A T#C102A T#C120A 6Turns Open NA NA NA N/A N/A N/A N/A 5Turns Open 745 833 897 723 835 787 908 4Turns Open 819 916 987 779 891 847 969 3Turns Open 894 1000 1077 835 946 908 1029 2Turns Open 968 1083 1166 890 1002 968 1090 1Turn Open 1043 1167 1256 946 1057 1029 1150 Closed 1117 1250 1346 1002 1113 1089 1211 Factory set at 3 turns open.
Performance Data Table PD-60 — Static Pressure Drops Through Accessories (Inches Water Column) — 3 - 10 Tons Tons Unit Model No. TSC036A 3 THC036A 4 T#C048A TSC060A 5 THC060A 6 T#C072A TSC090, 092A 7½ THC092A 8½ T#C102A 10 T#C120A 10 THC120A CFM Standard Filters1 960 1200 1440 960 1200 1440 1280 1600 1920 1600 2000 2400 1000 1200 1400 1600 1800 2000 2200 2400 1920 2400 2880 2400 3000 3600 2400 3000 3600 2720 3400 4080 3200 4000 4800 2000 2400 2800 3200 3600 4000 4400 4800 0.03 0.04 0.
Performance Data Table PD-62— Auxiliary Electric Heat Capacity Total2 Tons kW Input1 MBH Output1 No. of Stages T#C036A1 5.00 10.00 13.80 17.07 34.14 47.11 1 2 2 5.00 5.00 8.80 17.07 17.07 30.04 — 5.00 5.00 — 17.07 17.07 6.00 12.00 17.40 5.00 10.00 13.80 17.60 6.00 12.00 17.40 5.00 10.00 13.80 17.60 6.00 12.00 17.40 23.00 7.50 10.90 14.4 9.00 18.00 27.00 36.00 11.30 16.90 22.60 9.00 18.00 27.00 36.00 11.30 16.90 22.60 9.00 18.00 27.00 36.00 9.00 18.00 27.00 36.00 16.90 22.60 18.00 27.00 36.00 54.
Performance Data Table PD-63 — 3-5 Tons Air Temperature Rise Across Electric Heaters (Degrees F) kW 5.00 6.00 7.50 10.00 10.90 12.00 13.80 14.40 17.40 17.60 23.00 3 Ton 1200 CFM Single Phase Three Phase Stages T#C036A1 T#C036A3,A4,AW 1 1 2 2 2 2 2 2 2 2 2 13.2 — — 26.3 — — 36.4 — — — — — 15.8 — — — 31.6 — — 45.8 — — 4 Ton 1 1600 CFM Single Phase Three Phase T#C048A1 T#C048A3,A4,AW 9.9 — — 19.8 — — 27.3 — — 34.8 — 5 Ton 2000 CFM Single Phase T#C060A1 — 11.9 — — — 23.7 — — 34.
Zone Controls ReliaTel™ Controlled Units Zone Sensors are the building occupant’s comfort control devices for Precedent™ units with the Micro control: Programmable Night Setback — Auto or manual changeover with sevenday programming. Keyboard selection of Heat, Cool, Fan, Auto, or On. All Manual Changeover — Heat, Cool or Off System Switch. Fan Auto or Off Switch. One temperature setpoint lever.
Electrical Data (Standard Efficiency) Table ED-1 — Unit Wiring — Standard Efficiency Tons 3 4 5 6 7½ 8½ 10 Unit Model No.
Electrical Data (High Efficiency) Table ED-2 — Unit Wiring — High Efficiency Tons 3 4 5 6 7½ 8½ 10 Unit Model No.
Electrical Data (Standard Efficiency) Table ED-3 — Unit Wiring With Electric Heat (Single Point Connection) —208/230 Volts — Standard Efficiency Standard Indoor Motor Tons To Use With Heater Model No. Heater kW Rating1 Control Stages MCA Max Fuse Size Or Max Circuit Breaker2 Oversize Indoor Motor MCA Max Fuse Size Or Max Circuit Breaker2 208/230 Volts Single Phase 3 TSC036A1 BAYHTRR105A BAYHTRR110A BAYHTRR114A 3.8/5.0 7.5/10.0 10.4/13.8 1 2 2 25.5/28.9 48.0/55.0 65.1/74.
Electrical Data (Standard Efficiency) Table ED-4 — Unit Wiring With Electric Heat (Single Point Connection) — Standard Efficiency Standard Indoor Motor Tons To Use With Heater Model No. Heater kW Rating1 Control Stages MCA Max Fuse Size Or Max Circuit Breaker2 Oversize Indoor Motor MCA Max Fuse Size Or Max Circuit Breaker2 380 Volts Three Phase 5 TSC060AK BAYHTRR412A BAYHTRR418A BAYHTRR423A 7.5 10.9 14.4 2 2 2 19.6 26.1 32.
Electrical Data (Standard Efficiency) Table ED-5 — Unit Wiring With Electric Heat (Single Point Connection) — 575 Volts — Standard Efficiency Standard Indoor Motor Tons To Use With Heater Model No. Heater kW Rating1 Control Stages MCA Oversize Indoor Motor Max Fuse Size Or Max Circuit Breaker2 MCA Max Fuse Size Or Max Circuit Breaker2 575 Volts Three Phase 3 TSC036AW BAYHTRRW06A BAYHTRRW12A BAYHTRRW18A 6.0 12.0 17.4 1 2 2 8.6 15.8 22.3 15 20 25 9.3 16.6 23.
Electrical Data (Standard Efficiency) Table ED-5 — Unit Wiring With Electric Heat (Single Point Connection) — Optional Belt Drive — Standard Efficiency Optional Belt Drive Indoor Motor Tons To Use With Heater Model No.
Electrical Data (High Efficiency) Table ED-7 — Unit Wiring With Electric Heat (Single Point Connection) — 208/230 Volts — High Efficiency Standard Indoor Motor Tons To Use With Heater Model No. Heater kW Rating1 Control Stages THC036A1 BAYHTRR105A BAYHTRR110A BAYHTRR114A 3.8/5.0 7.5/10.0 10.4/13.8 1 2 2 25.5/28.9 48.0/55.0 65.1/74.8 THC048A1 BAYHTRR105A BAYHTRR110A BAYHTRR114A BAYHTRR118A 3.8/5.0 7.5/10.0 10.4/13.8 13.2/17.
Electrical Data (High Efficiency) Table ED-8 — Unit Wiring With Electric Heat (Single Point Connection) — 460 Volts — High Efficiency Standard Indoor Motor Tons To Use With Heater Model No. Heater kW Rating1 Control Stages MCA Oversize Indoor Motor Max Fuse Size Or Max Circuit Breaker2 MCA Max Fuse Size Or Max Circuit Breaker2 460 Volts Three Phase 3 THC036A4 BAYHTRR406A BAYHTRR412A BAYHTRR418A 6.0 12.0 17.4 1 2 2 10.4 19.4 27.5 15 20 30 11.9 20.9 29.
Electrical Data (High Efficiency) Table ED-9 — Unit Wiring With Electric Heat (Single Point Connection) — 575 Volts — High Efficiency Standard Indoor Motor To Use With Heater Model No. 3 THC036AW BAYHTRRW06A BAYHTRRW12A BAYHTRRW18A 6.0 12.0 17.4 1 2 2 4 THC048AW BAYHTRRW06A BAYHTRRW12A BAYHTRRW18A 6.0 12.0 17.4 5 THC060AW BAYHTRRW06A BAYHTRRW12A BAYHTRRW18A BAYHTRRW23A 6.0 12.0 17.4 23.
Electrical Data (High Efficiency) Table ED-10 — Unit Wiring With Electric Heat (Single Point Connection) — Optional Belt Drive — High Efficiency Belt Drive Indoor Motor Tons To Use With Heater Model No.
Electrical Data Table ED-11 — Electrical Characteristics — Evaporator Fan Motor — 60 Cycle — Standard and Oversized Standard Evaporator Fan Motor Tons 3 4 5 6 7½ 8½ 10 Unit Model No.
Electrical Data Table ED-13— Electrical Characteristics — Compressor Motor And Condenser Motor — 60 Cycle — Standard Efficiency Compressor Motors Tons 3 4 5 6 7½ 8½ 10 Condenser Fan Motors Amps1 Amps Unit Model No. No. Volts Phase HP2 RPM RLA LRA No.
Electrical Data Table ED-14 — Electrical Characteristics — Compressor Motor And Condenser Motor — 60 Cycle — High Efficiency Compressor Motors Tons 3 4 5 6 7½ 8½ 10 Unit Model No. THC036A1 THC036A3 THC036A4 THC036AW THC048A1 THC048A3 THC048A4 THC048AW THC060A1 THC060A3 THC060A4 THC060AW THC072A3 THC072A4 THC072AW THC092A3 THC092A4 THC092AW THC102A3 THC102A4 THC102AW THC120A3 THC120A4 THC120AW No.
Jobsite Connections Zone Sensors — Typical Number Of Wires DISCONNECT SWITCH (BY OTHERS) A— Manual Changeover ...................................... 4 Manual/Auto Changeover ............................. 5 Manual/Auto Changeover with Status Indication LED’s .......................... 10 Programmable Night Setback with Status Indication LED’s ............................
Dimensional Data (3-5Tons) All dimensions are in inches/millimeters.
Dimensional Data (3-5Tons) All dimensions are in inches/millimeters.
Dimensional Data (3-5Tons) All dimensions are in inches.
Dimensional Data (6-10 Tons) All dimensions are in inches.
Dimensional Data (6-10 Tons) All dimensions are in inches.
Dimensional Data (6-10 Tons) All dimensions are in inches.
Dimensional Data (3-5Tons Options/ Accessories) All dimensions are in inches.
Dimensional Data (6-10 Tons Options/ Accessories) All dimensions are in inches.
Weights Table W-1— Maximum Unit And Corner Weights (Lbs) And Center Of Gravity Dimensions (In.) Corner Weights (Lbs)1 Maximum Weights (Lbs) Center of Gravity (In.) Unit Model No.
Mechanical Specifications General The units shall be convertible airflow. The operating range shall be between 115°F and 0°F in cooling as standard from the factory for units with microprocessor controls. Operating range for units with electromechanical controls shall be between 115°F and 40°F. Cooling performance shall be rated in accordance with ARI testing procedures.
Mechanical Specifications 24-volt electromechanical control circuit shall include control transformer and contactor pressure lugs for power wiring. Units shall have single point power entry as standard. Accessories/Options Electric Heaters — Factory or fieldinstalled electric heat modules shall be available for installation within basic unit. Electric heater elements shall be constructed of heavy-duty nickel chromium elements internally delta connected for 240 volt, wye connected for 480 and 600 volt.
Mechanical Specifications Supply and/or Return Air Smoke Detector — With this option factoryinstalled, if smoke is detected, all unit operation will be shut down. Reset will be manual at the unit. Return Air Smoke Detectors require minimum allowable airflow when used with certain models. See the Installation, Operation, and Maintenance (IOM) manual for the models affected and the minimum allowable airflow required. This option is available for microprocessor controlled units.
*High Efficiency Units only Trane A business of American Standard Companies www.trane.com For more information contact your local dealer (distributor), local district office, or e-mail us at comfort@trane.