Installation and Maintenance Manual

Model Number Descriptions
10 VAV-SVX08E-EN
Digit 19—Outlet Connection
1 = Flanged
2 = Slip & Drive
Digit 20—Attenuator
0 = No Attenuator
W = With Attenuator
Digit 21—Water Coil
0= None
1 = 1-Row–Plenum inlet installed RH
2 = 2-Row–Plenum inlet installed RH
3 = 1-Row–Discharge installed, LH
4 = 1-Row–Discharge installed, RH
5 = 2-Row–Discharge installed, LH
6 = 2-Row–Discharge installed, RH1
A = 1-Row–Premium water coil inlet
B = 2-Row–Premium water coil inlet
C = 1-Row–Premium hot coil
on discharge, LH
D = 1-Row–Premium hot coil
on discharge, RH
E = 2-Row–Premium hot coil
on discharge, LH
F = 2-Row–Premium hot coil
on discharge, RH
Note: 1- and 2-row not available with
Low-Height
Digit 22—Electrical Connections
L = Left (Airflow hitting you in the
face)
R = Right (Airflow hitting you in the
face)
W = Narrow Corridor LH, Hi-Volt Inlet
Facing
X = Narrow Corridor RH, Hi-Volt Inlet
Facing
Note: (W & X) Fan Powered Series Only
Digit 23—Transformer
0 = N/A (provided as standard)
Digit 24—Disconnect Switch
0= None
W= With
Electric Reheat w/ door interlocking
power disconnect, Cooling Only and
Water Reheat w/ toggle disconnect
Digit 25—Power Fuse
0= None
W= With
Digit 26—Electric Heat Voltage
0= None
A = 208/60/1
B = 208/60/3
C = 240/60/1
D = 277/60/1
E = 480/60/1
F = 480/60/3
G = 347/60/1
H = 575/60/3
J = 380/50/3
K = 120/60/1
Note: K not available with Low Height
Digit 27, 28, 29—Electric Heat
kW
000= None
050 = 0.5 kW
010 = 1.0 kW
015 = 1.5 kW
260 = 26.0 kW
Note: Electric Heat Voltage -
0.5 to 8.0 kW–½ kW increments
8.0 to 18.0 kW –1 kW increments
18.0 to 46.0 kW–2 kW increments
Digit 30—Electric Heat Stages
0= None
1 = 1 Stage
2 = 2 Stages Equal
3 = 3 Stages Equal
Note: 3 not available with Low Height
Digit 31—Contactors
0= None
1 = 24-volt magnetic
2 = 24-volt mercury
3 = PE with magnetic
4 = PE with mercury
5 = SCR heat UC400
6 = SCR heat FMTD/ENCL/DD00
Note: SCR cannot be selected with the
following configuration:
• KW > 10, 208 volt 3 phase, Low
Height
• KW > 22, 480 volt 3 phase, Low
Height
• Voltage = 575 volt
Digit 32—Airflow Switch
0= None
W= With
Digit 33—Not Used
0= N/A
Digit 34—Actuator
0 = Standard
A = Belimo actuator
Digit 35—Wireless Sensors
0= None
1 = Factory Mounted Wireless
Receiver (Sensor Assembly)
2 = Wireless Comm Interface
Modular FM
Note: All sensors selected in
accessories
Digit 36—Pre-Wired Factory
Solutions
0= None
1 = Factory Mounted DTS
2 = HW Valve Harness
3 = Both DTS & HW Valve Harness
Digit 37—Bottom Access
0= None
W = Access Left Side of Terminal Unit
Digit 38—Piping Package
0= None
A = 2-way Automatic Balancing)
B = 3-way Automatic Balancing
Digit 39—Water Valve
0= None
1 = Proportional, HW Valve, 0.7 Cv
2 = Proportional, HW Valve, 2.7 Cv
3 = Proportional, HW Valve, 6.6 Cv
4 = Proportional, HW Valve, 8.0Cv
Digit 40—Flow Rate
0= None
A = 0.5 gpm (0.03 l/s)
B = 1.0 gpm (0.06 l/s)
C = 1.5 gpm (0.09 l/s)
D = 2.0 gpm (0.13 l/s)
E = 2.5 gpm (0.16 l/s)
F = 3.0 gpm (0.19 l/s)
G = 3.5 gpm (0.22 l/s)
H = 4.0 gpm (0.25 l/s)
J = 4.5 gpm (0.28 l/s)
K = 5.0 gpm (0.31 l/s)
L = 5.5 gpm (0.35 l/s)
M = 6.0 gpm (0.38 l/s)
N = 6.5 gpm (0.41 l/s)
P = 7.0 gpm (0.44 l/s)
Q = 7.5 gpm (0.47 l/s)
R = 8.0 gpm (0.50 l/s)
S = 9.0 gpm (0.57 l/s)
T = 10.0 gpm (0.63 l/s)
U = 11.0 gpm (0.69 l/s)
V = 12.0 gpm (0.76 l/s)
W = 13.0 gpm (0.82 l/s)