Split System Cooling Unit Owner's Manual

ManualsBrandsTrane ManualsAir CompressorSS-PRC003-EN

Split System Cooling Units

7.5 to 20 Tons

Air Handlers

7.5 to 20 Tons

50 Hz

Split System

Cooling Units

June 2006

SS-PRC003-EN

Summary of content (79 pages)

PAGE 1
Split System Cooling Units Split System Cooling Units 7.5 to 20Tons Air Handlers 7.
PAGE 2
Introduction Split System Cooling Units . . . Designed With Your Needs In Mind. TheTrane reputation for quality and reliability in air conditioning continues with the Odyssey™ family of light commercial split systems. Trane paid attention to your needs to make sure you get a system that will meet your job requirements every time...and at a competitive price. CoupleTrane’s reputation for quality and reliability in split system air conditioners with efficiency, flexibility and installation ease...
PAGE 3
Contents Introduction Features and Benefits 2 Application Considerations 8 Selection Procedure 9 Model Number Description General Data 10 11 Performance Data 14 Cooling Performance Fan Performance Electrical SS-PRC003-EN 4 15 42 47 Controls 51 Dimension and Weights 58 Mechanical Specifications 76 3
PAGE 4
Features and Benefits Condensing Unit Options The Odyssey split system product line includes condensing units in single, unloading and dual compressor options. TheTTA075A, 085A and 100A single compressor models feature single refrigeration circuitry lowering job installation costs by requiring only one set of refrigerant lines.These units are ideal for the low cost, new construction jobs as well as renovation and replacement buildings.
PAGE 5
Features and Benefits Odyssey air handler versatility is further increased by a complete line of accessories designed to match and install smoothly: • Discharge Plenum and Grille • Return Grille • Subbase • Electric Heaters • High Static Evaporator Motor • Isolators both Rubber-in-Shear and SpringType • A Full Line of Thermostats • Outdoor Thermostat Odyssey — A Complete Split System Odyssey delivers the flexibility to select a complete system that meets your particular job requirements.
PAGE 6
Features and Benefits • Requires no special tools to run the unit through its paces during testing. Simply place a jumper betweenTest 1 andTest 2 terminals on the Low VoltageTerminal Board and the unit will walk through its operational steps.The unit automatically returns control to the zone sensor after stepping through the test mode a single time, even if the jumper is left on the unit.
PAGE 7
Features and Benefits Quality And ReliabilityTesting • All units were rigorously rain tested at the factory to ensure water integrity. • Actual shipping tests were performed to determine packaging requirements. Units were test shipped around the country to determine the best packaging. • Factory shake and drop tests were used as part of the package design process to help assure that the unit arrives at the job site in top condition.
PAGE 8
Application Considerations Application of this product should be within the catalogued airflow and performance considerations. Clearance Requirements The recommended clearances identified with unit dimensions should be maintained to assure adequate serviceability, maximum capacity and peak operating efficiency. Actual clearances which appear inadequate should be reviewed with the localTrane Representative.
PAGE 9
Selection Procedure Cooling Capacity Step 1 — Calculate the building’s total and sensible cooling loads at design conditions. Use theTrane calculation form or any other standard accepted method. Step 2 — Size the equipment usingTable PD-1. Match the cooling loads at design conditions.
PAGE 10
Model Number Description Split System Condensing Unit Model Nomenclature T T A 1 2 0 A 4 0 0 E A 1 2 3 4 5 6 7 8 9 10 11 12 Digits 1, 2, 3 - Product Type Digit 8 - Electrical Characteristics TTA = D = 380-415/50/3 Split System Cooling Digits 4, 5, 6 - Nominal Gross Cooling Capacity (MBh) 075 085 100 155 200 = = = = = 75 85 100 15 5 200 Digit 9, 10 - Factory - Installed Options 00 = 0S = 0R = 0T = Digit 7- Major Development Sequence A B C D E F = = = = = = 1 Refrigerant Cir
PAGE 11
General Data Condensing Unit Table GD-1 — General Data Cooling Performance1 Gross Cooling Capacity, btu (kW) Matched Air Handler (kW) Condensing Unit Only2 (kW) ARI Net Cooling Capacity3 (kW) System Power kW Condensing Unit Power kW Compressor Number Type No. Motors (each) Motor HP (kW) Motor RPM ARI Sound Rating (Bels)4 TTA075A TTA085A TTA100A TTA100B 84,000(24.60) 84,000(24.60) 81,000(23.72) 7.81 7.05 90,000(26.35) 93,000(27.23) 88,000(25.77) 7.867 7.07 114,000(33.38) 114,000(33.38) 110,000(32.
PAGE 12
General Data Condensing Unit Table GD-2— General Data TTA 100C TTA 125B TTA 155B TTA 155C TTA 200B TTA200F M atched Air Handler 113,000(33.09) 134,000(39.24) 166,000(48.60) 167,000(48.90) 220,000(64.42) 220,000(64.42) Condensing Unit Only2 113,000(33.09) 130,000(38.06) 166,000(48.60) 167,000(48.90) 220,000(64.42) 220,000(64.42) A RI Net Cooling Capacity3 110,000(32.21) 130,000(38.06) 160,000(46.85) 161,000(47.14) 212,000(62.07) 212,000(62.07) 10.34 12.63 16.18 16.17 21.
PAGE 13
General Data Air Handler Table GD-3 — General Data TWE050A System Data1 No. Refrigerant Circuits 1 Suction Line in. (mm) OD 1.120(28.4) Liquid Line in. (mm) OD 0.38(9.7) Indoor Coil — Type Plate Fin Tube Size in. (mm) OD 0.375(9.5) Face Area sq. ft (m2) 5.00(.47) Rows 3 Fins Per Inch 12 Refrigerant Control Expansion Valve Drain Connection No. 4 Drain Connection Size in. (mm) 0.75(19.0) Drain ConnectionType PVC Indoor Fan Type FC Centrifugal No. Used 1 Diameter in. (mm) 12.0(304.8) Width in. (mm) 12.0(304.
PAGE 14
Performance Data System Table PD-1 — Gross Cooling Capacities (MBh) TTA075A Condensing Unit with TWE075A Air Handler (I-P) Ambient Temperature (°F) 85 CFM Airflow 2250 2500 2750 3000 Enter. Dry Bulb (°F) 75 80 85 90 75 80 85 90 75 80 85 90 75 80 85 90 61 TGC 77.2 77.6 79.1 83.1 78.8 79.3 81.7 85.9 80.1 80.9 84.1 88.4 81.3 82.3 86.1 90.5 SHC 60.6 70.5 79.1 83.1 63.4 74.3 81.7 85.9 66.1 78.0 84.1 88.4 68.6 81.5 86.1 90.5 67 95 73 TGC SHC TGC SHC 85.4 50.9 94.1 34.7 85.6 58.4 94.2 45.3 85.7 68.
PAGE 15
Performance Data System Table PD-2 — Gross Cooling Capacities (MBh) TTA075A Condensing Unit with TWE100A Air Handler (I-P) AmbientTemperature (°F) 85 CFM Airflow 2550 2850 3150 3450 Enter. Dry Bulb (°F) 75 80 85 90 75 80 85 90 75 80 85 90 75 80 85 90 61 TGC 82.1 82.6 85.2 89.5 83.7 84.5 88.1 92.5 85.1 86.0 90.5 95.1 86.2 88.0 92.7 97.4 SHC 66.3 77.8 85.2 89.5 69.7 82.4 88.1 92.5 72.9 86.0 90.5 95.1 76.0 88.0 92.7 97.4 67 95 73 TGC SHC TGC 90.5 55.2 99.3 90.7 63.7 99.4 90.8 75.0 99.6 91.3 86.
PAGE 16
Performance Data System Table PD-3 — Gross Cooling Capacities (MBh) TTA085A Condensing Unit with TWE075A Air Handler (I-P) Ambient Temperature (°F) 85 CFM Airflow 2250 2500 2750 3000 Enter. Dry Bulb (°F) 75 80 85 90 75 80 85 90 75 80 85 90 75 80 85 90 61 TGC 82.5 82.8 84.0 87.7 84.4 84.8 86.4 90.9 85.9 86.5 89.0 93.8 87.3 88.1 91.4 96.3 SHC 63.0 72.9 83.3 87.7 65.9 76.7 86.4 90.9 68.6 80.4 89.0 93.8 71.2 83.9 91.4 96.3 67 95 73 TGC SHC TGC SHC 91.6 53.2 101.7 37.2 91.9 61.0 101.7 48.1 92.
PAGE 17
Performance Data System Table PD-4 — Gross Cooling Capacities (MBh) TTA085A Condensing Unit with TWE100A Air Handler (I-P) AmbientTemperature (°F) 85 CFM Airflow 2500 2800 3100 3400 Enter. Dry Bulb (°F) 75 80 85 90 75 80 85 90 75 80 85 90 75 80 85 90 61 67 95 73 TGC SHC TGC SHC TGC SHC 87.7 68.7 97.0 57.2 107.1 39.2 88.0 80.1 97.3 66.3 107.2 51.4 89.8 89.8 97.5 77.6 107.6 63.2 94.4 94.4 97.9 89.0 107.8 74.9 89.6 72.2 99.1 56.7 109.0 40.0 90.2 84.8 99.4 69.7 109.3 53.3 93.1 93.1 99.5 81.9 109.
PAGE 18
Performance Data System Table PD-5 — Gross Cooling Capacities (MBh) TTA100A Condensing Unit with TWE100A Air Handler (I-P) Ambient Temperature (°F) 85 CFM Airflow 3025 3350 3675 4000 Enter. Dry Bulb (°F) 75 80 85 90 75 80 85 90 75 80 85 90 75 80 85 90 61 TGC 104.7 105.2 106.9 112.3 106.8 107.5 110.4 116.1 108.6 109.5 113.5 119.4 110.1 111.4 116.3 122.3 SHC 81.7 95.0 106.9 112.3 85.3 99.9 110.4 116.1 88.8 104.7 113.5 119.4 92.1 109.2 116.3 122.3 67 TGC 115.8 116.1 116.3 116.8 118.0 118.3 118.
PAGE 19
Performance Data System Table PD-6 — Gross Cooling Capacities (MBh) TTA100B Condensing Unit with TWE100B Air Handler (I-P) AmbientTemperature (°F) 85 CFM Airflow 3025 3350 3675 4000 Enter. Dry Bulb (°F) 75 80 85 90 75 80 85 90 75 80 85 90 75 80 85 90 61 TGC 103.0 103.7 105.9 111.5 105.2 106.1 109.5 115.4 107.0 108.2 112.6 118.8 108.5 110.1 115.5 121.8 SHC 80.9 94.4 105.9 111.5 84.5 99.2 109.5 115.4 87.9 103.9 112.6 118.8 91.2 108.5 115.5 121.8 67 TGC 114.1 114.8 115.1 115.8 116.3 116.6 117.
PAGE 20
Performance Data System Table PD-7 — Gross Cooling Capacities (MBh) - Both Compressors - TTA100C Condensing Unit with TWE100A Air Handler (I-P) Ambient Temperature (°F) 85 CFM Airflow 3025 3350 3675 4000 Enter. Dry Bulb (°F) 75 80 85 90 75 80 85 90 75 80 85 90 75 80 85 90 61 TGC 103.7 104.3 106.4 112.0 105.8 106.7 110.0 115.8 107.6 108.8 113.1 119.0 109.1 110.7 115.9 121.9 SHC 81.4 94.9 106.4 112.0 85.0 99.8 110.0 115.8 88.5 104.5 113.1 119.0 91.8 109.1 115.9 121.9 67 TGC 114.8 115.3 115.5 116.
PAGE 21
Performance Data System Table PD-8 — Gross Cooling Capacities (MBh) - Single Compressor - TTA100C Condensing Unit with TWE100A Air Handler (I-P) AmbientTemperature (°F) 85 CFM Airflow 3025 3350 3675 4000 Enter. Dry Bulb (°F) 75 80 85 90 75 80 85 90 75 80 85 90 75 80 85 90 61 TGC 63.8 67.3 71.2 75.2 64.8 68.8 72.9 77.0 66.0 70.2 74.4 78.6 67.1 71.4 75.6 79.9 SHC 62.6 67.3 71.2 75.2 64.8 68.8 72.9 77.0 66.0 70.2 74.4 78.6 67.1 71.4 75.6 79.9 67 95 73 TGC SHC TGC SHC 69.8 46.0 76.2 29.7 70.1 59.
PAGE 22
Performance Data System Table PD-9 — Gross Cooling Capacities (MBh) TTA125B Condensing Unit with TWE100B Air Handler (I-P) Ambient Temperature (°F) 85 CFM Airflow 3025 3350 3675 4000 Enter. Dry Bulb (°F) 75 80 85 90 75 80 85 90 75 80 85 90 75 80 85 90 61 TGC 109.9 110.2 110.6 113.5 112.6 112.8 113.6 117.6 114.6 115.1 116.3 121.3 116.6 117.1 118.5 124.5 SHC 81.1 92.5 104.2 113.5 84.5 96.8 109.5 117.6 87.3 100.8 114.6 121.3 90.2 104.5 118.5 124.5 67 TGC 121.9 122.2 122.5 122.7 124.7 125.0 125.
PAGE 23
Performance Data System Table PD-10 — Gross Cooling Capacities (MBh) TTA125B Condensing Unit with TWE155B Air Handler (I-P) AmbientTemperature (°F) 85 CFM Airflow 3750 4200 4650 5100 Enter. Dry Bulb (°F) 75 80 85 90 75 80 85 90 75 80 85 90 75 80 85 90 61 TGC 124.0 124.7 128.0 134.5 126.6 127.6 132.5 139.3 128.8 130.2 136.4 143.4 130.6 132.5 139.7 147.0 SHC 98.6 115.3 128.0 134.5 103.5 122.0 132.5 139.3 108.2 128.5 136.4 143.4 112.7 132.5 139.7 147.0 67 TGC 136.6 136.9 137.5 138.2 139.2 139.
PAGE 24
Performance Data System Table PD-11 — Gross Cooling Capacities (MBh) TTA155B Condensing Unit with TWE155B Air Handler (I-P) Ambient Temperature (°F) 85 CFM Airflow 4500 5000 5500 6000 Enter. Dry Bulb (°F) 75 80 85 90 75 80 85 90 75 80 85 90 75 80 85 90 61 TGC 153.4 154.3 157.3 165.4 156.6 157.7 162.6 171.0 159.3 160.8 167.2 175.9 161.5 163.6 171.3 180.2 SHC 120.3 140.1 157.3 165.4 125.7 147.5 162.6 171.0 130.9 154.6 167.2 175.9 135.9 161.5 171.3 180.2 67 TGC 169.3 169.6 170.5 171.3 172.5 172.
PAGE 25
Performance Data System Table PD-12— Gross Cooling Capacities (MBh) TTA155B Condensing Unit with TWE200B Air Handler (I-P) AmbientTemperature (°F) 85 CFM Airflow 4500 5000 5500 6000 Enter. Dry Bulb (°F) 75 80 85 90 75 80 85 90 75 80 85 90 75 80 85 90 61 TGC 157.9 158.8 162.4 170.7 161.2 162.4 167.9 176.6 164.0 165.6 172.8 181.7 166.3 168.7 177.1 186.3 SHC 124.4 145.1 162.4 170.7 130.3 153.1 167.9 176.6 135.9 160.8 172.8 181.7 141.2 168.3 177.1 186.3 67 TGC 174.3 174.6 175.4 176.3 177.6 178.
PAGE 26
Performance Data System Table PD-13 — Gross Cooling Capacities (MBh) - Both Compressors - TTA155C Condensing Unit With TWE155B Air Handler (I-P) Ambient Temperature (°F) 85 CFM Airflow 4500 5000 5500 6000 Enter. Dry Bulb (°F) 75 80 85 90 75 80 85 90 75 80 85 90 75 80 85 90 61 TGC 153.7 154.5 157.6 165.7 156.9 158.0 162.9 171.4 159.6 161.1 167.6 176.3 161.9 163.9 171.6 180.6 SHC 120.4 140.2 157.6 165.7 125.9 147.6 162.9 171.4 131.1 154.8 167.6 176.3 136.0 161.7 171.6 180.6 67 TGC 169.7 170.0 170.
PAGE 27
Performance Data System Table PD-14 — Gross Cooling Capacities (MBh) - Single Compressor - TTA155C Condensing Unit with TWE155B Air Handler (I-P) AmbientTemperature (°F) 85 CFM Airflow 4500 5000 5500 6000 Enter. Dry Bulb (°F) 75 80 85 90 75 80 85 90 75 80 85 90 75 80 85 90 61 TGC 94.3 99.4 105.3 111.3 95.8 101.8 107.9 114.1 97.7 103.8 110.1 116.5 99.3 105.6 112.0 118.5 SHC 92.3 99.4 105.3 111.3 95.8 101.8 107.9 114.1 97.7 103.8 110.1 116.5 99.3 105.6 112.0 118.5 67 TGC 103.0 103.6 105.4 111.5 104.
PAGE 28
Performance Data System Table PD-15 — Gross Cooling Capacities (MBh) TTA200B Condensing Unit with TWE200B Air Handler (I-P) Ambient Temperature (°F) 85 CFM Airflow 6000 6675 7350 8025 Enter. Dry Bulb (°F) 75 80 85 90 75 80 85 90 75 80 85 90 75 80 85 90 61 TGC 203.5 204.7 209.3 220.0 207.6 209.3 216.3 227.5 211.1 213.4 222.4 234.1 214.1 217.3 227.9 239.9 SHC 160.6 187.3 209.3 220.0 168.0 197.5 216.3 227.5 175.1 207.2 222.4 234.1 181.9 216.7 227.9 239.9 67 TGC 224.5 224.9 226.0 227.3 228.8 229.
PAGE 29
Performance Data Table PD-16 m3/h Airf low 10194 11341 12488 13634 Enter. Dry Bulb Temp (C) 24 27 30 33 24 27 30 33 24 27 30 33 24 27 30 33 _ System Gross Cooling Capacities (kW) - TTA200F w/ TWE200E - (SI) 30 16 MBH SHC 60.2 49.8 60.8 60.1 62.0 61.8 65.2 65.1 61.6 53.0 62.5 62.4 64.3 64.2 67.6 67.4 62.9 56.1 64.1 63.9 66.3 66.2 69.7 69.5 64.1 59.2 64.9 64.8 68.1 68.0 71.6 71.5 19 MBH SHC 65.8 35.8 66.2 46.0 66.6 56.3 67.4 66.8 67.3 37.5 67.7 48.8 68.2 60.4 69.2 69.2 68.5 39.1 68.9 51.6 69.6 64.
PAGE 30
Performance Data Condensing Unit Table PD-17— Cooling Performance (MBh) TTA075A Condensing Unit Only (I-P) ODTemp Suction ReferenceTemperature °F °F 30 35 40 45 50 55 65 Head press PSIG Cap. Btuh/1000 OD Unit KW 161 72.3 4.91 167 80.0 5.01 172 88.0 5.12 178 96.3 5.24 184 104.9 5.37 190 113.5 5.50 75 Head press PSIG Cap. Btuh/1000 OD Unit KW 187 70.4 5.40 193 77.8 5.51 198 85.4 5.63 205 93.2 5.76 211 101.1 5.89 217 109.1 6.03 85 Head press PSIG Cap. Btuh/1000 OD Unit KW 215 67.
PAGE 31
Performance Data Condensing Unit Table PD-18 — Cooling Performance (MBh) TTA085A Condensing Unit Only (I-P) ODTemp Suction ReferenceTemperature °F °F 30 35 40 45 50 55 65 Head press PSIG Cap. Btuh/1000 OD Unit KW 154 82.0 4.93 159 90.5 5.03 164 99.4 5.13 169 108.7 5.24 175 118.4 5.36 180 128.5 5.49 75 Head press PSIG Cap. Btuh/1000 OD Unit KW 178 78.5 5.41 183 86.5 5.51 188 94.9 5.63 194 103.8 5.75 199 113.0 5.88 205 122.7 6.02 85 Head press PSIG Cap.
PAGE 32
Performance Data Condensing Unit Table PD-19 — Cooling Performance (MBh) TTA100A Condensing Unit Only (I-P) ODTemp Suction ReferenceTemperature °F °F 30 35 40 45 50 55 65 Head press PSIG Cap. Btuh/1000 OD Unit KW 166 101.6 6.30 172 111.9 6.46 178 122.6 6.63 185 133.8 6.81 192 145.5 7.01 200 157.6 7.22 75 Head press PSIG Cap. Btuh/1000 OD Unit KW 191 97.1 6.95 197 106.8 7.12 203 116.9 7.30 210 127.6 7.50 218 138.7 7.71 226 150.3 7.94 85 Head press PSIG Cap.
PAGE 33
Performance Data Condensing Unit Table PD-20 — Cooling Performance (MBh) TTA100B Condensing Unit Only (I-P) ODTemp Suction ReferenceTemperature °F °F 30 35 40 45 50 55 65 Head press PSIG Cap. Btuh/1000 OD Unit KW 159 99.0 6.08 163 108.9 6.30 169 119.2 6.54 174 130.1 6.81 180 141.5 7.10 186 153.4 7.43 75 Head press PSIG Cap. Btuh/1000 OD Unit KW 184 94.4 6.66 189 103.9 6.90 194 114.0 7.16 200 124.5 7.45 207 135.5 7.77 214 147.1 8.11 85 Head press PSIG Cap.
PAGE 34
Performance Data Condensing Unit Table PD-21 — Gross Cooling Capacities (MBh) - Both Compressors - (I-P) TTA100C Condensing Unit Only OD Temp Suction Reference Temperature °F °F 30 35 40 45 50 55 65 Head press PSIG Cap. Btuh/1000 OD Unit KW 168.5 100.5 6.3 174.3 110.4 6.5 180.4 120.9 6.8 187.0 131.8 7.1 193.9 143.2 7.4 201.2 154.9 7.8 75 Head press PSIG Cap. Btuh/1000 OD Unit KW 192.9 95.7 6.9 198.9 105.3 7.1 205.3 115.5 7.4 212.2 126.0 7.8 219.3 136.9 8.1 226.8 148.0 8.
PAGE 35
Performance Data Condensing Unit Table PD-22 — Gross Cooling Capacities (MBh) - Single Compressor - (I-P) TTA100C Condensing Unit Only OD Temp Suction Reference Temperature °F °F 30 35 40 45 50 55 65 Head press PSIG Cap. Btuh/1000 OD Unit KW 138.6 51.3 3.1 141.3 56.5 3.2 144.1 61.9 3.3 147.0 67.7 3.4 150.1 73.7 3.5 153.4 80.1 3.6 75 Head press PSIG Cap. Btuh/1000 OD Unit KW 161.5 48.9 3.4 164.4 54.0 3.4 167.3 59.3 3.5 170.4 64.9 3.7 173.7 70.8 3.8 177.2 77.0 3.
PAGE 36
Performance Data Condensing Unit Table PD-23 — Cooling Performance (MBh) TTA125B Condensing Unit Only (I-P) ODTemp Suction ReferenceTemperature °F °F 30 35 40 45 50 55 65 Head press PSIG Cap. Btuh/1000 OD Unit KW 175 116.6 8.04 181 128.0 8.25 187 139.9 8.47 193 152.2 8.70 200 164.9 8.95 207 178.1 9.20 75 Head press PSIG Cap. Btuh/1000 OD Unit KW 201 111.2 8.83 207 122.1 9.06 214 133.4 9.29 221 145.2 9.53 228 157.5 9.79 235 170.0 10.06 85 Head press PSIG Cap.
PAGE 37
Performance Data Condensing Unit Table PD-24 — Cooling Performance (MBh) TTA155B Condensing Unit Only ODTemp (I-P) Suction ReferenceTemperature °F °F 30 35 40 45 50 55 65 Head press PSIG Cap. Btuh/1000 OD Unit KW 171 144.5 9.84 178 159.5 10.10 185 175.1 10.37 192 191.3 10.67 200 207.8 11.00 208 225.0 11.35 75 Head press PSIG Cap. Btuh/1000 OD Unit KW 197 140.1 10.85 204 154.4 11.13 211 169.2 11.43 218 184.4 11.74 227 200.2 12.09 235 216.4 12.45 85 Head press PSIG Cap.
PAGE 38
Performance Data Condensing Unit Table PD-25 — Gross Cooling Capacities (MBh) - Both Compressors - (I-P) TTA155C Condensing Unit Only OD Temp Suction Reference Temperature °F °F 30 35 40 45 50 55 65 Head press. PSIG Cap. Btuh/1000 OD Unit KW 169.8 144.3 9.8 176.2 159.3 10.0 183.0 175.0 10.3 190.1 191.1 10.6 197.8 207.7 10.9 206.0 224.9 11.3 75 Head press. PSIG Cap. Btuh/1000 OD Unit KW 195.5 140.0 10.8 202.2 154.3 11.1 209.2 169.1 11.4 216.8 184.4 11.7 224.9 200.2 12.0 233.4 216.
PAGE 39
Performance Data Condensing Unit Table PD-26 — Cooling Performance (MBh) - Single Compressor - (I-P) TTA155C Condensing Unit Only OD Temp Suction Reference Temperature °F °F 30 35 40 45 50 55 65 Head press. PSIG Cap. Btuh/1000 OD Unit KW 139.0 71.8 4.9 141.9 79.5 4.9 145.1 87.9 5.0 148.5 96.8 5.1 152.1 106.2 5.1 155.9 116.1 5.2 75 Head press. PSIG Cap. Btuh/1000 OD Unit KW 163.0 70.8 5.3 166.2 78.4 5.3 169.6 86.5 5.4 173.1 95.1 5.5 176.9 104.0 5.6 180.8 113.3 5.7 85 Head press.
PAGE 40
Performance Data Condensing Unit Table PD-27 — Cooling Capacities (MBh) TTA200B Condensing Unit Only ODTemp (I-P) Suction ReferenceTemperature °F °F 30 35 40 45 50 55 65 Head press PSIG Cap. Btuh/1000 OD Unit KW 168 198.0 12.47 174 217.3 12.77 180 237.4 13.08 186 258.3 13.42 193 280.0 13.79 200 302.5 14.18 75 Head press PSIG Cap. Btuh/1000 OD Unit KW 194 188.9 13.83 200 207.0 14.16 206 226.1 14.50 213 245.9 14.88 220 266.6 15.28 227 288.2 15.71 85 Head press PSIG Cap.
PAGE 41
Performance Data Condensing Unit Table PD28: Gross Cooling Capacities (MBH) - 20 Ton TTA200F Condensing Unit Only (I-P) Saturated Suction Temperature (F) Outdoor Air Temperature (F) 30 35 40 45 50 55 65 Head Pressure (psig) 292.4 302.4 313.1 324.4 336.3 348.8 Capacity (MBH) 208.2 227.3 247.1 267.6 288.8 310.5 Unit KW 11.40 11.73 12.08 12.45 12.84 13.25 75 Head Pressure (psig) 331.2 341.8 353.0 364.7 377.1 390.0 Capacity (MBH) 196.0 214.2 233.2 252.7 272.9 293.5 Unit KW 12.59 12.94 13.31 13.70 14.11 14.
PAGE 42
Performance Data Air Handler Table PD-29— Evaporator Fan Performance — TWE050A (I-P) External Static Pressure (Inches of Water Column) CFM .10" .20" .30" .40" .50" .60" .70" .80" .90" 1.00" 1.10" RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP 1400 1500 1600 1700 1800 1900 2000 2100 — — — 601 625 642 659 674 — — — 646 0.37 698 — 607 0.36 661 0.40 713 — 625 0.38 676 0.43 727 0.35 648 0.40 696 0.44 744 0.36 671 0.41 716 0.46 762 0.40 687 0.45 731 0.50 776 0.
PAGE 43
Performance Data Air Handler Table PD-31— Evaporator Fan Performance TWE075A (I-P) External Static Pressure (In. Of Water Column) 0.10 0.20 0.30 0.40 0.50 0.60 0.70 0.80 0.90 1.00 1.10 RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP CFM 2000 2125 2250 2375 2500 2625 2750 2875 3000 — — 443 0.44 489 — — 453 0.46 499 — — 463 0.49 510 — — 473 0.51 520 445 0.47 489 0.54 533 464 0.50 506 0.57 548 484 0.53 523 0.59 562 504 0.56 540 0.62 576 524 0.59 557 0.65 590 1.
PAGE 44
Performance Data Air Handler Table PD-33 — Evaporator Fan Performance TWE100A, TWE100B (I-P) External Static Pressure (In. Of Water Column) CFM 0.10 0.20 0.30 0.40 0.50 0.60 0.70 0.80 0.90 1.00 1.20 RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP 1.5 HP Standard Motor and Low Static Drive 2600 460 0.32 493 0.39 527 0.47 565 0.55 603 0.63 641 0.71 2775 473 0.37 506 0.45 540 0.53 576 0.61 613 0.69 649 0.77 2950 487 0.43 519 0.50 552 0.58 587 0.67 623 0.75 658 0.
PAGE 45
Performance Data Air Handler Table PD-35 — Evaporator Fan Performance — TWE155B (I-P) External Static Pressure (Inches of Water Column) CFM 4000 4250 4500 4750 5000 5260 5500 5750 6000 .10" .20" .30" .40" .50" .60" .70" .80" .90" 1.00" 1.20" 1.40" RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP 628 633 637 641 645 650 652 653 655 1.34 1.37 1.40 1.42 1.44 1.46 1.47 1.48 1.49 653 658 662 666 670 675 678 680 681 1.38 1.41 1.44 1.50 1.52 1.53 1.55 1.57 1.
PAGE 46
Performance Data Air Handler Table PD-37 — Evaporator Fan Performance TWE200B,E (I-P) External Static Pressure (In. Of Water Column) CFM 0.10 0.20 0.30 0.40 0.50 0.60 0.70 0.80 0.90 1.00 1.20 140 RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP 5200 — — 5525 — — 5850 — — 6175 473 0.99 6500 492 1.12 6825 510 1.25 7150 528 1.38 7475 550 1.61 7800 572 1.83 3.0 HP Standard Motor and Low Static Drive 461 0.74 503 0.91 545 479 0.88 521 1.04 563 497 1.01 539 1.
PAGE 47
Performance Data Table PD-39— Discharge Plenum And Grille Assembly Throw Distance — Air Handle — ft (m) Unit Model No. CFM 1400 1600 1800 2000 2200 2100 2400 2700 3000 3200 3600 4000 4400 4800 4300 4900 5400 6000 5600 6400 7200 8000 TWE050 TWE075 TWE100 TWE155 TWE200 m3/h 2380 2718 3060 3398 3737 3568 4079 4586 5098 5436 6116 6797 7477 8154 7304 8327 9176 10195 9515 10872 12233 13594 Straight 38 (11.6) 42 (12.8) 46 (14.0) 48 (14.6) 51 (15.5) 49 (14.9) 52 (15.9) 55 (16.8) 58 (17.7) 56 (17.1) 62 (18.
PAGE 48
Performance Data Table PD-41 — Auxiliary Electric Heat Capacity — Air Handler Unit Model No. TWE050/075/100AD TWE100BD TWE075, 100AD TWE100BD TWE155,200B, 200E Total kW 5.00 9.96 14.96 24.92 No. of Stages 1 1 1 2 34.88 10.00 19.92 29.92 49.84 2 1 1 2 2 Stage 1 kW Btu Input Output 5.00 17,065 9.96 33,993 14.96 51,058 14.96 51,058 Stage 2 kW Btu Input Output — — — — — — 9.96 33,993 kW Input 5.00 9.96 14.96 24.92 Btu Output 17,065 33,993 51,058 85,051 19.92 10.00 19.92 19.92 29.92 14.96 — — 10.
PAGE 49
Electrical Data Table ED-1 — Unit Wiring — Condensing Units Unit Model No. Unit Operating Voltage Minimum Circuit Ampacity Maximum Fuse Size or Maximum Circuit Breaker TTA075A TTA085A TTA100A TTA100B TTA125B TTA155B TTA155C TTA200B TTA200F 380/415 380/415 380/415 380/415 380/415 380/415 380/415 380/415 380/415 15.6 19.1 22.5 23.9 28.1 28.4 28.4 41.0 48.
PAGE 50
Electric Heat Data Table ED-5 — Unit Wiring With Electric Heat (Single Point Connection) — Air Handlers Heater Model No. BAYHTRL405A BAYHTRL410A BAYHTRL415A BAYHTRL425A BAYHTRL405A BAYHTRL410A BAYHTRL415A BAYHTRL425A BAYHTRL435A BAYHTRL405A BAYHTRL410A BAYHTRL415A BAYHTRL425A BAYHTRL435A BAYHTRM410A BAYHTRM420A BAYHTRM430A BAYHTRM450A BAYHTRM410A BAYHTRM420A BAYHTRM430A BAYHTRM450A Heater kW Rating1 5.00 9.96 14.96 24.92 5.00 9.96 14.96 24.92 34.88 5.00 9.96 14.96 29.92 34.88 10.00 19.92 29.92 49.84 10.
PAGE 51
Jobsite Connections Wiring shown with dashed lines is to be furnished and installed by the customer. All customer- supplied wiring must be copper only and must conform to local electrical codes. NOTE: 1. When electric heater accessory is used, single point power entry or dual point power entry is field optional. Single point power entry option is through electric heater only. TTA050/TWE050A Field Wiring: A — 3 power wires. Line voltage for 3 phase, 2 wires for single phase. B — 3 power wires.
PAGE 52
Typical Wiring Air Handler Air Handler Typical wiring diagram. For specific wiring, see isee wire diagram manual online.
PAGE 53
Typical Wiring Condensing Unit Air Handler Typical unit wiring diagram. For specific wiring, see see wire diagram manual online.
PAGE 54
Typical Wiring Condensing Unit Condensing Unit — Single Compressor Typical wiring diagram. For specific wiring, see wire diagram manual online.
PAGE 55
Typical Wiring Condensing Unit Condensing Unit — Single Compressor Typical wiring diagram. For specific wiring, see wire diagram manual online.
PAGE 56
Typical Wiring Condensing Unit Condensing Unit — Dual Compressor Typical wiring diagram. For specific wiring, see wire diagram manual online.
PAGE 57
Typical Wiring Condensing Unit — Dual Compressor Typical wiring diagram. For specific wiring, see wire diagram manual online.
PAGE 58
Dimensional Data Figure DD-1 — TTA075 Condensing Units All dimensions are in inches and millimeters.
PAGE 59
Dimensional Data Figure DD-2 — TTA085A and 100A Condensing Units All dimensions are in inches and millimeters.
PAGE 60
Dimensional Data Figure DD-3 — TTA100C Condensing Units All dimensions are in inches and millimeters.
PAGE 61
Dimensional Data Figure DD-4 — TTA100B and TTA125B Condensing Units All dimensions are in inches and millimeters.
PAGE 62
Dimensional Data Figure DD- 5— TTA155B Condensing Unit All dimensions are in inches and millimeters.
PAGE 63
Dimensional Data Figure DD-6 — TTA155C Condensing Units All dimensions are in inches and millimeters.
PAGE 64
Dimensional Data Figure DD-7 — TTA200B Condensing Unit All dimensions are in inches and millimeters.
PAGE 65
Dimensional Data Figure DD-8 — TTA200F Condensing Unit All dimensions are in inches and millimeters.
PAGE 66
Dimensional Data Figure DD-9 — TWE050A Air Handlers All dimensions are in inches and millimeters. Table DD-1 — Air Handler Dimensions — in. (mm) Model No. A B C D E F G H TWE050A 48 (1219.20) 38 (965.20) 22 (558.80) 8 (203.20) 19-1/2 (495.30) 26 (660.40) 15-7/8 (403.23) 14-1/8 (358.78) Table DD-1 — (Continued) 66 Model No. J K Q S V W Y AA TWE050A 1-7/8 (47.63) 42-1/8 (1069.98) 34-5/8 (879.48) 3/8 (9.53) — — — — 1-1/8 (28.58) 1-7/8 (47.
PAGE 67
Dimensional Data Figure DD-10— TWE075A; TWE100A, 100B Air Handlers All dimensions are in inches and millimeters. Table DD-2 — Air Handler Dimensions — in. (mm) Tons C D E F G H TWE075A Model No. 54 47-1/2 (1371.60) (1206.50) A B 25 (635.00) 11-3/4 (298.45) 22-3/8 (568.33) 22 (558.80) — — 17-3/4 (450.85) TWE100A 54 63-12 (1371.60) (1612.90) 25 (635.00) 19-3/4 (501.65) 22-3/8 (568.33) 22 (558.80) — — 17-3/4 (450.85) TWE100B 54 63-1/2 (1371.60) (1612.90) 25 (635.00) 19-3/4 (501.
PAGE 68
Dimensional Data Figure DD-11 — TWE050A, 075A 100A; TWE100B Air Handlers All dimensions are in inches and millimeters. Table DD-3 — Air Handler Dimensions — in. (mm) 68 Model No. L M N P R T X Z TWE050A 34-5/8 (879.48) 2-7/8 (73.03) 35-5/8 (904.88) 12-1/4 (311.15) 32-1/4 (819.15) 12-1/2 (317.50) 7-5/8 (193.68) 2 (50.80) TWE075A 36-7/8 (936.63) 6-5/8 (168.28) 45-1/8 (1146.18) 16-1/8 (409.58) 41-3/4 16-1/4 (1060.45) (412.75) 6-7/8 (174.63) 1-3/4 (44.
PAGE 69
Dimensional Data Figure DD-12— TWE155B and 200B Air Handlers All dimensions are in inches and millimeters.
PAGE 70
Dimensional Data Figure DD-13 — TWE155B and 200B Air Handlers All dimensions are in inches and millimeters. PANEL Table DD-4— Air Handler Dimensions — in. (mm) Model No. C D E F G H J K TWE155B 69 79-1/2 (1752.60) (2019.30) A B 27-5/8 (701.68) 12-3/8 (314.33) 1-5/8 (41.28) 26 (660.40) 25-1/8 (638.18) 49-1/8 (1247.78) 56-1/4 (1428.75) 15-1/2 (393.70) TWE200B 71-7/8 92-1/2 (1825.63) (2349.50) 30-1/2 (774.70) 18-7/8 (479.43) 4-1/2 (114.30) 31 (787.40) 28 (711.20) 51-7/8 (1317.
PAGE 71
Dimensional Data Figure DD-14 — TWE200E Air Handler All dimensions are in inches and millimeters. Table DD-5 — Air Handler Dimensions — in.(mm) Model No. A B C D E F G H J K L M N P R TWE200E 71 7/8" 92 5/8" 30 1/2" 18 7/8" 4 1/2" 28 1/2" 28" 51 7/8" 59 1/8" 18 1/8" 20 7/8" 89 1/4" 1 3/4" 50 7/8" 39 1/8" (1826) (2353) (775) (479) (114) (724) (711) (1318) (1502) (460) (530) (2267) (45) (1292) (994) Table DD-5 — (Continued) Model No.
PAGE 72
Dimensional Data Figure DD-15— Electric Heater for TWE050, 075, 100 Air Handlers All dimensions are in inches and millimeters.
PAGE 73
Dimensional Data Figure DD-17 — Discharge Plenum and Grille All dimensions are in inches and millimeters. Table DD-6 — Discharge Plenum And Grille Dimensions — in. (mm) Model TWE050 Model No. BAYPLNM015 TWE075 BAYPLNM016 TWE100 BAYPLNM017 A B C 377/8 217/8 28 (962) (555.6) (711.2) 471/2 25 28 (1206.5) (635) (711.2) 631/2 25 28 (1612.9) (635) (711.2) Table DD-7 — Discharge Plenum And Grille Dimensions — in. (mm) For Use with Electric Heat Model TWE050 Model No.
PAGE 74
Weights Table W-1 — Unit and Corner Weights — Net Lbs (kg) Unit Model No. TTA075A TTA085A, 100A TTA100B TTA100C TTA125B TTA155B TTA155C TTA200B TTA200F Shipping Maximum (lbs) 370 (167.8) 443 (200.9) 481 (218.2) 492 (223.2) 481 (218.2) 764 (346.6) 764 (346.6) 948 (430.0) 920 (418) Net Maximum (lbs) 326 (147.9) 399 (181.0) 427 (193.7) 437 (198.2) 427 (193.7) 679 (308.0) 679 (308.0) 863 (391.5) 835 (379) 1 105 (47.6) 149 (67.6) 133 (60.3) 139 (63.1) 133 (60.3) 196 (88.9) 196 (88.9) 247 (112.
PAGE 75
Weights Table W-3 — Air Handlers and Corner Weights — lb1 (kg) Unit Model No. TWE050A TWE075A TWE100A TWE100B TWE155B TWE200B TWE200E Shipping Maximum 298 (135.2) 388 (176.0) Net Maximum 232 (105.2) 317 (143.8) Corner Weights — Vertical 1 2 3 4 59 (26.8) 59 (26.8) 59 (26.8) 59 (26.8) 79 (35.8) 79 (35.8) 79 (35.8) 79 (35.8) Corner Weights — Horizontal A B C D 54 (24.5) 64 (29.0) 64 (29.0) 54 (24.5) 73 (33.1) 81 (36.7) 84 (38.1) 77 (34.9) 439 (199.1) 754 (342.0) 886 857 (390) 392 (177.8) 692 (313.
PAGE 76
Mechanical Specifications General General Units Unitsshall shallbebeassembled assembledon onheavy heavy gauge gaugesteel steelmounting/lifting mounting/liftingrails railsand and shall Units shall shallbebeweatherproofed. weather proofed. Units shall include reciprocating includea hermetic scrollcompressor(s), compressors, plate fan(s)and and platefinfincondenser condensercoil(s), coils, fans motor(s), and holding charge motors, control(s), controls and holding charge of ofnitrogen. nitrogen.
PAGE 77
Mechanical Specifications Controls Condensing units shall be completely factory wired with necessary controls and contactor pressure lugs or terminal block for power wiring. Unit shall provide an external location for mounting a fused disconnect device. A choice of microprocessor or electromechanical controls shall be available. The 24-volt electro-mechanical control circuit shall include control transformer and contactor pressure lugs for power wiring.
PAGE 78
Mechanical Specifications General Air handler units shall be completely factory assembled including coil, condensate drain pan, fan motor(s), filters, and controls in an insulated casing that can be applied in either vertical or horizontal configuration. Units shall be rated and tested in accordance with ARI standard 210/240, 340/360. Casing Unit casing shall be constructed of zinc coated, heavy gauge, galvanized steel.
PAGE 79
Trane A business of American Standard Companies www.trane.com For more information contact your local district office, or e-mail us at comfort@trane.com Literature Order Number SS-PRC003-EN File No. PL-UN-SS-PRC003-EN-0606 Supersedes PL-UN-SS-PRC003-EN-0104 Stocking Location Electronic Only Trane has a policy of continuous product and product data improvement and reserves the right to change design and specifications without notice.