Wireless Ethernet Bridge User Manual

Appendix A Command Set Reference
Trango Broadband Wireless — Atlas5010 page 42
Link Control
The Link Control page features the RF Link Loopback / Speed Test. In this test, the user specifies the transmission rate
(in Mbps) in both the local radio and the peer radio as well as the duration time (in minutes) for the test. During the test,
the local radio will transmit packets across the wireless link. The peer radio will retransmit eq uivalent p ackets back to
the local radio. The test will measure and report error rate and actual throu ghput as measured in Mbps. Th e fo llowing
link test was run for 60 seconds with a specified TX rate of 12 Mbps per end.
To run a link loopback test, both radio s must be in Opmode ON and status “Conn ected”
In this example, the error rate was 2 packets from MU to RU and 0 packets f rom RU to MU. Measured ag grega t e
bandwidth is 10.93 Mbp s.