Manualshelf

User's Manual

ManualsBrandsTrango Systems ManualsElectronicsWireless Internet Access Subscriber Unit
21222324252627282930
Deployment & Installation
M5580M-FSU page 22
Strain relief and boot installation
Prior to deployment, insert the Cat-5 Cable through Boot and the Foam strain relief. Next, insert Cat-5 Cable into the
radio’s port opening. Next, clip front end of the boot into the unit and last clip the back end of the boot into to the unit,
as shown in the photographs below.
Mounting Hardware
Radios are supplied with mounting hardware for pole installations. See diagram below for proper use of the mounting
hardware.
Figure X-X: M5580M – FSU Series SU Pole Mount (1” – 2” Diameter)