User's Manual

TrangoFOX™ Subscriber Unit User Manual
Trango Broadband Wireless
Page 2
Overview
This manual covers basic configuration and installation of TrangoFOX Subscriber Units for the Access5830
Wireless Broadband System. The FOX series subscriber units are available three variations.
Model Part # Description __________
FOX5800 M5800S-FSU 5.8 GHz FOX SU with internal 15 dBi antenna
FOX5300 M5300S-FSU 5.3 GHz FOX SU with internal 15 dBi antenna
FOX5800-D M5800S-FSU-D 5.8 GHz FOX SU for Reflector Dish Part# AD5800-25
TrangoFOX subscriber units work in conjunction with 5.8/5.3 GHz dual-band Access5830™ access points. The
FOX5800 and FOX5800-D also work in conjunction with 5.8 GHz single-band Access5800™ access points.
Please refer to the Access5830 (or Access5800) user manual for detailed information on overall system
implementation, configuration, and management of your point-to-multipoint system. The Access5830 User Manual
also covers many important details of subscriber unit configuration.
FCC Information
This device complies with Part 15 of FCC Rules and Regulations. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference and (2) this device must accept any interference
received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio-frequency energy and, if not installed
and used in accordance with these instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in any particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on,
the user is encouraged to correct the interference by one of more of the following measures:
1) Reorient the antenna;
2) Increase the separation between the affected equipment and the unit;
3) Connect the affected equipment to a power outlet on a different circuit from that which the receiver is
connected to;
4) Consult the dealer and/or experienced radio/TV technician for help.
FCC ID: NCYM5800SFSU
NCYM5800SFSUD
NCYM5300SFSU
Canada: to be announced soon
IMPORTANT NOTE:
Intentional or unintentional changes or modifications must not be made unless under the express consent of the
party responsible for compliance. Any such modifications could void the user’s authority to operate the equipment
and will void the manufacturer’s warranty. To comply with FCC RF exposure requirements, the following antenna
installation and device operating configurations must be satisfied. The antenna for this unit must be fixed and
mounted on outdoor permanent structures with a separation distance of at least two meters from all persons.
Furthermore, it must not be co-located or operating in conjunction with any other antenna or transmitter.