User Manual

Getting Started Browser Interface
Trango Broadband Wireless — Access5830 User Manual Rev. H 3.0 page 12
Browser Interface
The HTTP browser interface is an easy-to-use, configuration and management tool. The web pages originate from the
radio itself, so no additional software is needed on the managing PC other than a web browser.
The browser interface’s functionality is a subset of the commands available in the command line interface (CLI). To use
the browser interface, the following must be present:
• An Ethernet connection between a PC and the radio
• Set your PC’s Ethernet properties to a subnet that is routable to the radio (radio default IP
address=192.168.100.100)
• A web browser (i.e. Microsoft Internet Explorer)
In order to use the browser interface, simply connect the radio to a PC and type the radio’s IP address into the web
browser. This will bring up the Login
page.
 Note: Only one user can have an HTTP session with a given radio at a time. The log out timer is set to five minutes.
 Note: Most pages are similar for Access Points and Subscriber Units. When there are significant differences, both
are included in this text. With each page there is a brief description of the major features. For more discussion on any
feature see the Command Set Reference, or click the Help
hyperlink.
Figure 4-3: Browser Interface Login Page
Type the password (default trango) and continue. This will bring up the radio’s System Information
page.