User Manual

Specifications Command Set Reference

Trango Broadband Wireless — Access5830 User Manual Rev. H 3.0 page 63

Command Description

AP/S

U Remarks

time display current time Both

time <hh> <mm> <ss> set current time

<hh> = 0..23 <mm> = 0..59 <ss> =

0..59

tm display current time mark Both

updateflash _loader+ For updating the radio’s loader

firmware.

Gets loader image from TFTP buffer

and writes to flash memory at loader

image section.

AP This command is rarely used

since the loader firmware does

not often require updating.

updateflash <mainimage | fpgaimage>

For updating radio’s main firmware

or FPGA firmware. Gets firmware

image from TFTP buffer, verifies

checksum, and writes to flash

memory at main or FPGA image

section.

Both Examples:

updateflash mainimage 483985

1092844

updateflash fpgaimage 83383

393D38

updateflash sudb write current SU database into flash

memory at SUDB section

updateflash systemsetting write current configuration into flash

memory at system configuration

section

Both same results achieved with

abbreviated command: save ss

ver displays firmware version info

1. version number and date

code

2. Firmware and FPGA

version code

3. Firmware and FPGA image

checksum

Both