User Manual

Specifications Specifications
Trango Broadband Wireless — Access5830 User Manual Rev. H 3.0 page 64
Appendix C Specifications
M5830S-SU and M5830S-AP-60
All specifications apply to the M5830S-SU, M5830S-AP-60 radios unless otherwise stated.
NOTE: For details on the M5830S-SU-EXT and M5830S-AP-EXT, please see the professional installation guide for
those products.
Radio Transmit Specifications
Frequencies:
Storable Channels: 30 memory locations
Channel spacing:
ISM Band: 5.736 to 5.836 GHz in 1 MHz increments
Default Channels-
Channel 1: 5.736 GHz
Channel 2: 5.756 GHz
Channel 3: 5.776 GHz
Channel 4: 5.796 GHz
Channel 5: 5.816 GHz
Channel 6: 5.836 GHz
Channel 7-30: Unprogrammed
AP RF Conducted Power: ISM Band: Max: +22 dBm +/- 2 dB
Min: -8 dBm +/- 2 dB
AP EIRP Max: +36 dBm High band with internal 14 dBi patch antenna
SU RF Conducted Power: ISM Band: Max: +22 dBm +/- 2 dB
Min: -8 dBm +/- 2 dB
SU EIRP Max: +40 dBm High band with internal 18 dBi patch antenna (M5830S-SU only)
Freq. Stability: .00025 % PLL Stabilized (2.5 ppm) over temp
Freq. Plan: Single upconversion, 480 MHz IF
Modulated BW: 22 MHz (null to null, 20 dB)
2
nd
Harmonic atten: Per CFR47 part 15.205
LO Supression: Per CFR47 part 15.205
Symbol Rate: 1.375 MSPS
Error Correction: None
Modulation: 1 MBPS DBPSK for header, 11 MBPS CCK spread spectrum for payload
Receiver Section
Cascade Noise Figure: < 6 dB
Sensitivity: - 83 dBm typical-1600 byte packet
(1E10-6 BER) - 87 dBm typical-64 byte packet
Adj. Channel Rejection: > 20 dB for 10 % PER
Image Rejection: > 60 dB for 10% PER
Frequency Plan: Single conversion, IF at 480 MHz
LO stability: .00025% PLL stabilized (+/-2.5ppm) over temperature range
Data Input Section
Data Rate (User): Up to 10 MBps Sustained throughput
Format: 10/100 BaseT IEEE 802.3 Ethernet compliant