User Manual

Specifications Specifications
Trango Broadband Wireless — Access5830 User Manual Rev. H 3.0 page 67
Receiver Section (check these figures)
Cascade Noise Figure: < 6 dB
Sensitivity: - 82 dBm typical-1600 byte packet
(1E10-6 BER) - 87 dBm typical-64 byte packet
Adj. Channel Rejection: > 20 dB for 10 % PER
Image Rejection: > 60 dB for 10% PER
Frequency Plan: Single conversion, IF at 480 MHz
LO stability: .00025% PLL stabilized (+/-2.5ppm) over temperature range
Data Input Section
Data Rate (User): Up to 10 Mbps sustained throughput
Format: 10/100 BaseT IEEE 802.3 Ethernet compliant
Ethernet packet: Up to 1600 byte long packets
Power
Input Voltage: Input voltage range at unit is 10.5 VDC to 24 VDC max
Power is supplied over Ethernet cable using junction box provided, with up to 300 feet of 24 AWG STP cable.
Current Cons.: 400 mA in transmit mode at max power using 20 V standard adapter (8 W)
Data Output Section
Data Rate (User): 10 Mbps maximum sustained throughput
Format: 10/100 BaseT IEEE 802.3 Ethernet compliant
Ethernet Protocols: TCP/IP, Telnet, TFTP, UDP, and HTTP
Physical Interfaces
LAN Interface: Shielded RJ45 connector
Power: Carried on 4 unused pins of Ethernet cable
Mechanical and Environmental
General Material: High Temp ABS/Polycarbonate Enclosure
Size: 9.2”x4.25”3.1”
Weight: 1.5 lb (radio)
Mounting: Polycarbonate Wall/Pole mount bracket
Environmental
Operating Temp: -40° to 60° C
Storage: -40° to 85° C
Humidity: 100 % when sealed properly
NEMA Rating: NEMA 4
Standard Power Supply
20 Volt DC Power adapter and J-Box supplied with product.
Type: Linear wall mount transformer
Input: 120 VAC
Output: 20 VDC +/- 1 V
Max current: 1200 mA