User's Manual

TrangoSystems,Inc. StrataLink24QuickStartGuide 10

Installation

TheStrataLink24comespreconfiguredtolinkupassoonaspowerisapplied.Toinstall

andoperatetheStrataLinkfollowthesesteps:



BENCH:

1) ApplypowerusingthePoEorwithdirectpower(‐48VDC)

2) LogintoeachunitusingabrowserortelnetwiththedefaultIPaddresses

of

192.168.100.100/192.168.100.101withthefollowinguser/passwords

a. Viewnode user:admin password:trango

b. Confignode: user:config password:trango

3) Unitsshouldlinkifwaveguideportsareorientedtowardeachother.

4) Adjustthetransmitpowerasappropriate.ForFCCCompliance,itisthe

responsibilityoftheinstallertosetthetransmitterpoweratorbelow‐3dBm

tomeetthefieldstrengthlimitsofFCCPart15.249.

5) Savechanges.

6) ChangetheIPaddresstothedesiredIPaddressandsubmit.Radioconnection

willbelostuntilnewIPaddressisused.

