User's Manual

Trango Systems, Inc. StrataPro 24 Quick Start Guide 10
3) Connect the PC Ethernet to the PoE injector Data In port and verify the Ethernet
link comes up.
4) Log into either Radio unit using a browser using the default IP addresses of
192.168.100.100/192.168.100.101 with the following credentials:
user: admin password: trango
Log In Page
5) Navigate to the Link Info page as shown below.
The Link Info page shown below displays the current radio IP settings and RF
settings for the link. If the link is locked then the remote side information will be
shown. To make changes to the current settings, click the Config Mode button to
log into Config Mode.