User's Manual

Trango Systems, Inc. StrataPro 24 Quick Start Guide 13
FIELD INSTALLATION:
1) Install the pole mount to the back of the StrataPro Unit using the 4 #10-32
Bolts/lockwashers and install on pole as shown below. Install the radio to the
mount first.
2) Attach the StrataPro 24 Unit + Mount to the mounting pole (3 inch diam typical)
with “R” indicator at the 12 O’Clock position - Adjust the mounting bolts to
ensure that the bubble level is centered. This unit will be transmitting Right Slant
Polarization and receiving Left Slant Polarization from the perspective of the
installer. IMPORTANT: Install the far end unit exactly the same way, with the
“R” at the top. Because this system uses slant polarization, the units will be
cross polarized.
3) If it is desired to use Left Slant Polarization, the “L” should be oriented at the 12
O’Clock position on BOTH ENDS. Typically this will not be necessary unless
multiple links are co-located.
Letter “R”