User's Manual

Trango Systems, Inc. StrataPro 24 Quick Start Guide 4
Radio Unit Overview
Below is a picture showing the main interfaces of the SP24 after removing the port
cover (loosen the two captive thumbscrews)
User Interfaces
P1 (RJ45) – Port 1 Ethernet Interface for Traffic and Management (Default).
Autonegotiate 100/1000 BaseT. This port also supports PoE operation using the POE-
GIGE-56 Power Injector. This is the default traffic and management port.
P2 (SFP) - Port 2 Ethernet Interface for Traffic and Management. Autonegotiate
100/1000 BaseT for Copper SFP and 1000 Base-X or 2500 Base-X for Fiber. Use only
Trango approved SFP modules.
P3 (SFP) - Port 3 Ethernet Interface for Traffic and Management. Autonegotiate
100/1000 BaseT for Copper SFP and 1000 Base-X for Fiber. Use only Trango approved
SFP modules. With the optional SFP-Console cable this port can be directly connected
to a PC Serial port.
P4 (SFP) - Port 4 Ethernet Interface for Traffic and Management. Autonegotiate
100/1000 BaseT for Copper SFP and 1000 Base-X for Fiber. . Use only Trango approved
SFP modules.
NOTE: DO NOT CONNECT POE to SFP ports AS THE SFP MODULE WILL BE DAMAGED
48VDC - Direct Power Terminal Block for applying direct +48 VDC nominal power to the
unit. Usable range is +43 to +57 VDC