User's Manual

Trango Systems, Inc. StrataPro 24 Quick Start Guide 8
WEB BROWSER SETUP
The best performance is obtained using Google Chrome as the browser.
When using the web in config mode, changes can be entered and changed on the link by
pressing the “Apply Changes” button. The changes will take effect immediately but will
not be saved to FLASH memory. If a reboot is performed, the last saved configuration of
the system will be reloaded.
To permanently save the changes after verifying the changes, press the “Save Changes”
button. This will overwrite the configuration file in FLASH so that the next time the
radio is rebooted the changes will take effect.
When purchased as a link, one radio will be programmed with the IP address
192.168.100.100 and the other will be 192.168.100.101. The radios are setup with a
default 100 MHz channel bandwidth with IBM enabled on Port 1. Traffic can be carried
on any port over the link.
After logging into the config level and selecting the Link Setup Page, the IP address,
Netmask, and Gateway should be changed as appropriate for both radios. Press the
“Save Changes” button to the left to save the IP address. When properly linked the
display should show the locked indications at the top of each page.