BTR-1020 Bluetooth music receiver With SBC supported Feature ◎ SBC codec support ◎ A2DP Bluetooth profile supported ◎ 33 feet (10M) effective range ◎ Audio RL audio output ◎ 8 devices ID storable ◎ Micro USB Port for powering What’s in the box AC/DC Adaptor (option) Main Unit 3.5mm male→ male Audio cable USB Cable 1 3.
Outlook and connectors Front Top View Back Side View Setup your BTR-1020 3.
Analogue connection 1. 2. Connect one 3.5mm end of the include audio to headphone jacket on the BTR-1020. Connect the other end to an audio input on your home stereo system (3.5mm or 3.5mm + 3.5mmm 2 RCA). Consult your stereo user’s manual for more information on how to accomplish this. 3. 4. Consult your stereo user’s manual for more information on how to accomplish this.
2.Turn On the Bluetooth function 3.Your iPod/iPhone/iPad will auto searching available device. You will see “Music Receiver” then Tap on it. 5. Your iPod/iPhone/iPad connected to BTR-1020 Now. And You can play music from your iPod/iPhone/iPad. 4 4. Enter “0000” when the player asks for PIN code (some devices have no need to input PIN).
Android Phone/Tablet( (ver 4.0 as Example) ) 1. Go to Bluetooth manager of your smart phone by the following step a. From your smart phone home page, tap on “setting” 2. Searched Bluetooth Devices will show up, please tap on “Music Receiver” b. Inside the setting, turn on The Bluetooth 3. Enter “0000” when the player asks for PIN code(some devices have no need to input PIN). c. Bluetooth is turned on 4. Once paired, the blue LED light on the BTR-1020 will flash once.
Although the BTR-1020 can only play music from one device at a time, it is capable of being paired to up to 8 devices. It means that you have to enter the PIN code once for each device. You can play the music now. Just play music on your device as you normally would and the sound will come out from your stereo system. Note: the effective range of BTR-1020 is 33 feet (10M). (light of sight). If you hold and wear the Smartphone or tablet and cover the Bluetooth antenna, the distance will be shorter.
Indication of LED Indication meaning Description Flash once 1 sec per 5 secs Power on /Pairing Waiting for connection Permanent Lighted connected Device and main unit are connected Troubleshooting You can solve your problems from this section No music out from my stereo speaker ◎ Make sure the BTR-1020 is powered.
FCC Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules.