User Manual

Indication of LED
There are 2 LEDs in the front Panel, each LED indicate what is the output selection now.
Troubleshooting
You can solve your problems from this section
No music out from my stereo speaker
◎ Make sure the 11270 is powered.
◎ Make sure an audio cable or an Optical cable is correctly and firmly connected to
11270
◎ Make sure that the audio source selection of your amplifier is correct with your audio
connection (analogue audio or TOSLINK)
◎ Make sure the volume of the stereo is set to a comfortable listening level
◎ Make sure you are within range.
◎ Make sure the Bluetooth function is opened on your device.
◎ Make sure you are playing the music from your device.
SAFETY WARNINGS
◎ 11270 requires full connection and both hands to install.
◎ Do not use 11270 near water(for example, a bath tub, wash bowl, kitchen sink,
laundry tub, wet basement, swimming pool, or other areas located near water).
◎ Clean with dry cloth.
◎ Unplug the 11270 before cleaning.
◎ Install 11270 far away from heat sources.
◎ Use only the attached accessories.
◎ Unplug the 11270 when unused for long time.
***aptX
®
software is copyright CSR plc or its group companies. All rights reserved. The
aptX
®
mark and the aptX logo are trademarks of CSR plc or one of its group companies
and may be registered in one or more jurisdictions.
** This device supports Near Field Communication (NFC) technology as specified by
the NFC Forum.
“The N Mark is a trademark or registered trademark of NFC Forum, Inc. in the United
States and in other countries.”
11
Indication Meaning Description
Flash once 1 sec
per 5 secs
Power on
/Pairing
Waiting for connection
Permanent Lighted connected Device and main unit are connected