User's Manual

7
Note:
Some devices, such as iPhone, will connect immediately after pairing so the LED will
ON. Other devices, such as notebook, may ask you if you wish to connect and LED will
go off after pairing until a connection is established.
Although the RF-BTR319 can only play music from one device at a time, it is capable of being
paired to up to 8 devices.
You can play the music now. Just play music on your device as you normally would and the
sound will come out from your stereo system.
Note: the effective range of RF-BTR319 is 33 feet(10M) (light of sight). If you hold and
wear the Smartphone or tablet and cover the Bluetooth antenna, the distance will be
shorter..
Reconnecting your device
If you move out of range or turn off the Bluetooth feature on you iPad/iPhone/iPod touch or
Smartphone,RF-BTR319 will be disconnected from your device. To reconnect, simply open the
Bluetooth manager and tap on the “RF-BTR319”, then you do not need to input PIN again, the
connection will be done automatically.
Adding a new phone or tablet
If you want to switch from one device to another, please follow these steps
1. End the existing Bluetooth connection with connected device.
2. The RF-BTR319 can now be connected with another device such as iPad/iPod/iPhone or
Smartphone or tablet.
3. Follow the section “Pairing the RF-BTR319” to connect a new device.
Out of range or lost signal:
When the paired phone or device away from receiver (33 feet) or there is something
blocking the Bluetooth signal. The LED light will go off, it means the connection between
device and RF-BTR319 is lost. To avoid a lost connection:
1. Move the music device back into range ( within 33 feet), and make sure there’s a clear
line of sight and there are no obstructions between RF-BTR319 and device.
2. Within 15 seconds, the connection will automatically be reestablished and LED will turn
on
3. If the connection is lost for more than 30 seconds, you need to reconnect the device and
RF-BTR319 again. Please follow the “Reconnect Your Device” section.