User Manual

3
Operation
Connect to the first headset or music receiver
1. Take your Bluetooth headphone or Bluetooth music receiver
2. make it into “pairing” mode, please consult your manual for further
information
3. The BTX-1200 will auto connect the “pairing” devices, when
BTX-1200 and headphone or music receiver are connected, the
LED on BTX-1200 will go permanent lighted.
Connect to the second headset or music receiver
1. Take your second Bluetooth headphone or Bluetooth music
receiver
2. make it into “pairing” mode, please consult your manual for further
information
3. Press the “pairing” button on BTX-1200 for one second, the LED
will blinking for seconds, BTX-1200 is searching for the second
Bluetooth headset or music receiver, at the same time, the audio
on first connected device will be muted.
4. when BTX-1200 and headphone or music receiver are connected,
the LED on BTX-1200 will go permanent lighted
Note: BTX-1200 can connect two Bluetooth A2DP receivers at the same time,
in some scenario, if you want to connect another A2DP device, you need to
reset the BTX-1200 for new connection.
Reset Method
Press the “pairing” key on BTX-1200 for 5 seconds, then release it, the
LED on BTX-1200 will go blinking for searching “pairing” A2DP devices
nearby.
Note: the effective range of BTX-1200 is 33 feet (10M) (light of
sight). For the best performance we recommend you to let
BTX-1200 visible. Do not block the bluetooth antenna; otherwise
the distance will be shorter.