User Manual

4
Indication of LED
Troubleshooting
You can solve your problems from this section, no music from your
headset or music receiver.
 Make sure the BTX-1200 is powered.
 Make sure an audio cable is correctly and firmly connected to
BTX-1200
 Make sure that the audio source is correct and with audio out.
 Make sure the volume of the audio out is set to a comfortable
listening level
 Make sure you are within range.
Safety Warnings
 BTX-1200 requires full connection and both hands to install.
 Do not use BTX-1200 near water (for example, a bath tub, wash
bowl, kitchen sink, laundry tub, wet basement, swimming pool, or
other areas located near water).
 Clean with dry cloth.
 Unplug the BTX-1200 before cleaning.
 Install BTX-1200 far away from heat sources.
 Use only the attached accessories.
 Unplug the BTX-1200 when unused for long time.
*** aptX
®
software is copyright CSR plc or its group companies. All rights
reserved.
The aptX
®
mark and the aptX logo are trademarks of CSR plc or one of
its group companies and may be registered in one or more jurisdictions.
Indication
M
eaning
D
escription
Flash once 1 sec per 5
secs
Power on /
Pairing
Searching the device under
pairing mode
Permanent Lighted Connected
Device and main unit are
connected