User's Manual

STEP 2:
Setting Up the Receiver
Connect the included 3.5mm stereo / RCA
or the 3.5mm stereo audio cable to the
Audio Out” jack on the receiver. Next,
connect the other end to your stereo’s
audio input jacks.
Connect the AC adapter plug to the
transmitter and then plug the AC
adapter into a standard AC outlet.
STEP 3:
Using Your LF-DAS System
Turn on the audio source and stereo
system. The transmitter and receiver
link automatically, and the power
indicator on the receiver will light.
The transmitter has 8 channels. If you
can not hear clear sound or the receiver’s
power indicator does not light, press
the button on the transmitter labeled
“CHANNEL”repeatedly to select a channel
with clear sound.
Adjust the audio source’s volume to the
desired level.
LF-DAS
6
STEP 1:
Setting Your Transmitter
To achieve optimal performance and greater reception
range, keep the transmitter and receiver away from
wireless LAN access points, microwave ovens and wireless
networks, phones and baby monitors that operate on
2.4GHz frequency.
Options for connecting the transmitter.
To connect to a laptop, notebook or desktop computer use
the included USB cable to connect to your computer’s USB
port and the USB port on the transmitter, or use the
3.5mm stereo audio cable and connect to your computer’s
headphone jack and the “AUDIO-IN” jack on the
transmitter. Make sure to put the switch labeled
“USB/AUDIO-IN” into the correct position.
To connect to an iPod, MP3 player, CD player or portable
DVD player use the included 3.5mm stereo cable and plug
into the headphone jack and the “AUDIO-IN” jack of the
transmitter. Make sure to put the switch labeled
“USB/AUDIO-IN” into the audio-in position.
To connect to a stereo system, use the included 3.5mm
stereo to RCA cable. Connect to the
AUDIO-IN” jack on the transmitter and
to the audio out RCA jacks on your stereo.
Connect the AC adapter plug to the
transmitter and then plug the AC
adapter into a standard AC outlet.
The power indicator will light. When
using the USB cable, the AC adapter
is not required on the transmitter.
LF-DAS
5
T6021-LF-DAS-OM 4X5.qxp 2007.1.30 4:25 PM Page C6