User's Manual
a. by composite Video (RCA)
1. Make sure the ON / OFF switch on both the transmitter and receiver is in the OFF
position before making any connections.
2. Take a RCA to RCA cable(included) and connect one end to the A/V out of RX-2470
and the other end to the A/V in of VCR.
Take another one cable and connect one end to A/V out of VCR and then other end
to A/V in port of TV.
if your TV does not have any A/V in port then you can use 75Ω RF coaxial cable
from TV's antenna IN (or VHF/UHF) to your VCR's modulator output.
3.Plug one end of power cord of the adaptor into the DC jack on the RX-2470 and the other
end into any standard 120V AC outlet. Use only the adaptor provided.
4.Locate and orient the Receiver according to picture 5 and 6 of this manual.
b. by S-Video
Please note: S-Video connectors has a special orientation, when you want to use S-Video
connection, you need to be carefully handled the connector, make sure the orientation is correct.
Push it gently, otherwise, you will broke the connector and conector socket of device
1.Make sure the ON / OFF switch on both the transmitter and receiver is in the OFF position
before making any connections.
2. take RCA to RCA Cable (included), connect Audio RL to the Audio RL output socket of Rx2470,
then take S-Video to S-Video Connect to the S-Video output of Rx 2470 connect the other
Audio RL to the Audio RL input , S-Video to the S-Video input of your VCR get another RCA to
RCA , S-Video to S-Video cable connect the output of your VCR and the input of Television
If your TV does not have any A/V in port then you can use 75Ω RF coaxial cable from TV's
antenna IN (or VHF/UHF) to your VCR modulator output.
3. Plug one end of power cord of the adaptor into the DC jack on the RX-2470 and the other end
into any standard 120V AC outlet. Use only the adaptor provided
4.Locate and orient the Transmitter according to picture 5 and 6 of this manual
12
RECEIVER
S-Video Cable
RCA Cable
Ant. IN
To Power
Source
ANT
VCR Output
RF IN
RF OUT
AV IN S IN
AV IN S IN
AV OUT S OUT
RCA Cable
S-Video Cable
RF IN
or