User Manual

b. By S-Video
Please note: S-Video connectors has a special orientation, when you want to use S-Video
connection, you need to be carefully handled the connector, make sure the orientation is correct.
Push it gently, otherwise, you will broke the connector and conector socket of device
1.Make sure the ON / OFF switch on both the transmitter and receiver is in the OFF position
before making any connections.
2.RCA to RCA Cable(included), connect Audio RL to the Audio RL input socket of Tx2470, then
take S-Video to S-Video Connect to the S-Video Input of Tx 2470 connect the other Audio RL
to the Audio RL output , S-Video to the output S-Video of your DVD, DSS or LD et another RCA
to RCA , S-Video to S-Video cable connect the other output of your DVD, DSS or LD and the
input of Televisions
If your TV does not have any A/V in port then you can use 75Ω RF coaxial cable
from TV's antenna IN (or VHF/UHF) to your DVD, DSS or LD modulator output.
3.ug one end of power cord of the adaptor into the DC jack on the TX-2470 and the
other end into any standard 120V AC outlet. Use only the adaptor provided.
4.cate and orient the Transmitter according to picture 5 and 6 of this manual
FURTHER APPLICATIONS WITH RECEIVER
Connect the Receiver to a VCR, which is connected to a TV.
This set up enables you to record transmitted audio and video on your remote VCR
and also enjoy the picture and sound on a remote TV at the same time.
11
TRANSMITTER
S-Video Cable
RCA Cable
Ant. IN
Recommended TV
connection for
dual output VCR's
TV
To Power
Source
ANT
VCR Output
RF IN
RF OUT
AV IN S IN
AV OUT S OUT
RCA Cable
S-Video Cable
RF IN
AV IN
S IN
or