User Manual

INSTALLATION

TRANSMITTER (Tx-2470)

a. By Composite Video(RCA)

1. Take a RCA to RCA cable(included),take one end connected to the AV In socket of

Tx-2470.(see Pictures 1 )

2. Connect the other end to the Audio / Video Out port of VCR, DVD, VCD,

Satellite receiver .Etc. (see Pictures 1)

b. by S-Video

1. Take a RCA to RCA cable(included),take Audio RL connected to the Audio RL In

socket of Tx-2470. Take a S-Video to S-Video cable connect one end to S-Video input

socket of Tx-2470. (see Pictures 1 )

2.connect the other end of Audio RL to the Audio RL Output Port of VCR, DVD, VCD,

Satellite receiver .Etc. and also connect other end of S-video to S-Video Output of of

VCR, DVD, VCD, Satellite receiver .Etc. (see Pictures 1 )

3. Connect the power adaptor to the power outlet. Turn power ON.

** DC 12V 300mA, AC 120V Adaptor. (see Pictures 1 )

4. Stick the IR mouse in front of the sensor receiving window

of the device i.e. VCR, DVD, VCD,.. Satellite receiver . Etc. under effective range

and working angles. (see Pictures 2 )

5. Choose one of the 4 channels by sliding the selection button ( must be set to

same Channel on both transmitter & receiver) (see Pictures 4 )

RECEIVER (Rx-2470)

a. by Composite Video (RCA)

1. Take a suitable RCA to RCA(included) cable and connect one end to A/V socket of

Rx-2470.(see Pictures 3 )

2. Connect the other end to the Audio / Video In port of TV. (see Pictures 3 )

b. by S-Video

1. Take a RCA to RCA cable(included),take Audio RL connected to the Audio RL In

socket of Rx-2470. Take a S-Video to S-Video cable connect one end to S-Video input

socket of Rx-2470. (see Pictures 3 )

2. Connect the other end of Audio RL to the Audio RL Input Port of Television and also

connect other end of S-video to S-Video Input Port of Television (see Pictures 3 )

3. Connect the power adaptor to the power outlet. Turn power ON.

**DC 12V 300mA, AC 120V Adaptor (see Pictures 3 )

4. Choose one of the 4 channels by sliding the selection button ( must be set to

same Channel on both transmitter & receiver) (see Pictures 4 )

5. Please make sure this unit is set a little forward to the top of TV in order to have the

best IR performance. (see Pictures 7 )