Transair® Advanced Pipe Systems for Industrial Fluids Compressed Air - Vacuum - Inert Gas - Industrial Water and Oil
TRANSAIR®, FROM THE TECHNICAL ROOM Technical Room Main Ring Secondary Ring Industrial Water
TO THE HEART OF PRODUCTION Drop Point of Use Isolation Valve Take Off
Transair ® Advanced Pipe Systems for Industrial Fluids aluminium RANGE • Calibrated Aluminium Pipe Qualicoat Painting • Stainless Steel Pipe AISI 304 or 316L • Diameters (in mm) 16.
Transair ® THE Solution for your Multi-Fluid Networks TRANSAIR® ALUMINIUM RANGE for Compressed Air, Vacuum and Inert Gas p.13 Technical Information p. 14 to 23 Product Range p. 25 to 65 Installation Guide p. 67 to 111 TRANSAIR® STAINLESS STEEL RANGE for Industrial Water and Oil Compressed Air, Vacuum and Inert Gas Technical Information p. 114 to 119 Product Range p. 121 to 133 Installation Guide p. 135 to 151 Stainless Steel Drops p.
Transair ® A Business Unit of Parker Hannifin Corporation Parker Hannifin is the world leader in motion and control technologies, working as a partner with its customers to increase their productivity and profitability. Within Parker, Transair® is the business unit specialising in projects for industrial fluids networks.
Transair ® Transair ® HistorY 1996 Creation of the Transair® pipework system 16.5, 25 and 40mm 2005 New technology for the diameters 76 & 100mm 2010 New diameter 168mm 2015 New diameter 50mm with SnapRing technology 2000 New technology for the diameter 63mm 2006 The Original Modular Pipework System for Industrial Buildings Transair®, the original modular pipework system utilising aluminium pipe and quick connectors, was launched in 1996.
Transair ® The Best System for Industrial Fluids A Technology with Multiple Assets Transair® is the ideal solution for all compressed air, inert gas, vacuum and industrial fluid networks, by combining adaptability, quick installation, high performance and durability, while improving the profitability and reducing the related maintenance and operating costs of your networks. Quick • No need to weld, glue or crimp. • Lightweight for easy handling. • Ready-to-use.
Transair® is Suitable for Most Business Sectors Recognised for its performance, Transair® is installed, from the technical room to the points of use, in most industrial sectors, such as: AUTOMOTIVE FOOD & BEVERAGE AEROSPACE ELECTRONICS RAILWAY PLASTIC INDUSTRY construction LogistiCS textile INDUSTRY laboratoRIES/ pharmaceutiCAL INDUSTRY For All Types of Projects Transair® is the best choice to retrofit old networks Transair® is the best choice for a new installation or extension Transair® is th
Transair ® The Largest Offer of Tools and Services The Transair® offer combines a wide range of tools and services to support every step of a project for industrial fluid networks: design, estimation, delivery, installation. DESIGN Sizing tools to select the right diameter: • Transair® Flow Calculator for compressed air and inert gas networks. • Transair® Vacuum Calculator for vacuum networks.
DELIVERY GeoLoc: The Geolocation Service proposed by Transair® • Transair® real-time delivery tracking service from the shipping site to the work site. • Built-in GSM beacon for on-site direct deliveries. • Localisation of deliveries throughout the shipment, with sending of programmable alerts. • Optimised organisation of work sites. Logistics Expertise Logistical conditions adapted to the customers’expectations: • Tailor-made packaging to facilitate material handling and storage.
Transair ® The Quality Benchmark produCts Product Quality All Transair® products are tested and controlled at every stage of the production process to ensure maximum efficiency for the user. Our products have to succeed a series of drastic tests: static and dynamic leak tests, burst pressure, cycled pressure and accelerated ageing tests. STANDARD AND REGULATION universe Quality System II ISO Certification Parker Hannifin is certified ISO 9001 version 2008 and ISO TS 16949 version 2009.
Product Traceability Transair® tracks each production batch at any stage of its manufacturing process. All products are marked individually for an optimum follow-up (batch number and barcode on packaging). The origin of the products and the material certificates are available upon request. Quality of the Fluids II ISO 8573 Certification This international standard establishes the different quality classes in compressed air.
12
TRANSAIR® ALUMINIUM RANGE transair® ALUMINIUM RANGE for Compressed Air, Vacuum and Inert Gas Technical Information 14 to 23 Technical Specifications 14 to 17 Transair Standards and Certifications 18 - 19 ® Transair® Applications 20 - 21 Material Aluminium Range 22 Transair Connection Technologies 23 ® Product Range 25 to 65 Rigid Aluminium Pipe 26 Fixing Clips for Rigid Pipe 28 Flexible Hoses 29 Pipe-to-Pipe & Stud Connectors 30 Ball Valves and Butterfly Valves 38 Quick Assembly B
TECHNICAL SPECIFICATIONS Transair® Main Features II Applications Transair® is adapted for compressed air applications (dry, lubricated or with water condensation), for inert gas applications like nitrogen, argon or CO2 (for purity up to 99.99%) and for vacuum applications (performance and compatibility described page 19 of this catalogue). II Working Pressure and Temperature The maximum working pressure of Transair® system, versus operating temperature, is according to the diagram below.
TECHNICAL INFORMATION Sizing II Sizing a Network Select the Transair ® diameter for your application based on required flow and length.Estimated values for a closed loop network, a pressure of 8 bar with 5% pressure drop.Velocity is not taken into account. Flow Length 164ft 328ft 492ft 984ft 1640ft 2460ft 3280ft 4265ft 5249ft 6561ft Compressor (kw) Nm3/h Nl/min cfm 50m 100m 150m 300m 500m 750m 1000m 1300m 1600m 2000m 10 167 6 16.5 16.5 16.5 16.
Transair® SIZING TOOLS Transair® Flow Calculator (TFC) and Transair® Vacuum Calculator (TVC) TFC and TVC sizing tools are simple, quick and easy to use. When entering: • the flow of the compressor or pump • the length of the main ring (closed loop yes/no) • the working pressure Your network is immediately sized with the most suitable Transair® diameter for your project.
TECHNICAL INFORMATION Transair® PAYBACK TOOL Transair® Energy Efficiency Calculator (TEEC) II Energy Efficiency with Transair® The Transair® Energy Efficiency Calculator software determines the savings and the ROI (Return On Investment) timeframe using compressor data (pressure, power, annual service hours, type of dryer), plus data from the network (length of the main ring, type of open or closed loop, pipe material used) and the local cost of electricity, including an inflation factor.
Transair® STANDARDS AND CERTIFICATIONS Transair® aluminium range certifications fall within the standards and regulations universe described on pages 8 and 9 of this catalogue. Standards Related to Transair® Aluminium Pipe II Qualicoat Label Transair® aluminium piping system complies with the QUALICOAT label, which guarantees the quality of the painting process, the chemicals used, the finished quality and the coating resistance of the aluminium pipe.
Transair® aluminium range can be used for vacuum applications down to 10 mbar absolute pressure. II Compatibility with Non Flammable Gases Compatibility with Transair® Gas Transair® aluminium range is suitable for distribution of non flammable gases such as: Argon, Nitrogen, Carbon Dioxyde and mix of these gases. Based on laboratory purity testing, Transair® (fitting and aluminium piping) is compatible with 99.99% purity Nitrogen applications.
Transair® FOR INDUSTRIAL VACUUM Transair® system is particularly suited for vacuum applications: - Diameters up to 168mm to meet all requirements - Full flow connection for a better aspiration - Big diameters for a maximum flow on the machine connections - Optimum sealing to guarantee the proper functioning of the machines - Different colours of pipe for easy network identification - Sizing tool to ease the project study (TVC) II Certificates: - Vacuum Performance, 10 mbar in absolute pressure - Air Qual
TECHNICAL INFORMATION Transair® FOR TECHNICAL ROOMS ® Equal Cross RA07 End Cap with Plug RA25 Equal and Reducer Y RA26 1 Flanged Tee RA44 3 Flanged Cross RA07 Circular Flange RA30/RA31 Increaser Tee RA04 21
matERIAL aluminium RANGE Range References Ø16.
Transair® innovative technology takes into account the specific requirements of each diameter and provides the user with an optimum safety coefficient and easy connection. Seal Gripping Ring Ø16.5 - Ø25 - Ø40 mm Tightening Marks Simply push the pipe into the connector up to the connection mark. The gripping ring of each fitting is then automatically secured and the connection is safe.
24
PRODUCT RANGE transair® ALUMINIUM RANGE Product Range Rigid Aluminium Pipe 26 Fixing Clips for Rigid Pipe 28 Flexible Hoses 29 Pipe-to-Pipe & Stud Connectors 30 Ball Valves and Butterfly Valves 38 Quick Assembly Brackets 40 Wall Brackets 44 Tools 48 Fixtures and Accessories 51 FRL, Automatic Drain and Accessories 53 Hose Reels - Blowgun - Recoil Tubing 56 Hoses and Tailpiece Adaptors 57 Automatic Couplers 58 Connection Accessories 62 25
Rigid aluminium pipe II Clean air ISO 8573: 2001 & 2010 Class 1.1.1. II Optimum flow rate performance II Lightweight II QUALICOAT certified surface finish II 3 colours: blue (RAL 5012/BS1710), grey (RAL 7001), green (RAL 6029) (others: please consult us) II Extruded pipe, conforms to EN 755.2, EN 755.8 and EN 573.3 blue pipe Transair® L1 ø ext. ø int. L1 (m) L (m) Kg 1003A17 04 00 16.5 13 3 2.930 0.660 1004A17 04 16.5 13 4.5 4.430 0.990 25 22 3 2.903 1.
PRODUCT RANGE BLUE PIPE Transair Transair®® L1 L Ø 50 63 ø ext. ø int. L1 (m) L (m) Kg 1003A50 04 50.8 48 3 2.950 2.142 1006A50 04 50.8 48 6 5.950 4.320 1003A63 04 63 59 3 2.950 3.140 1006A63 04 63 59 6 5.950 6.175 GREY PIPE Transair Transair®® L1 L ø ext. ø int. L1 (m) L (m) Kg 1003A50 06 50.8 48 3 2.950 2.142 1006A50 06 50.8 48 6 5.950 4.320 1003A63 06 63 59 3 2.950 3.140 1006A63 06 63 59 6 5.950 6.
Fixing clips for rigid ALUMINIUM pipe II Easy adaptation for all pipework configurations II For suspension of pipes, from walls, partitions, beams, cable trays, Canalis electrical installations, etc, vertically or horizontally II Perfectly adapted for use with Transair® networks Fixing clip for rigid aluminium pipe Ø 16.5 25 40 Transair® ØD C H1 H K L Kg 6697 17 00 16.5 M8 x 1.25 46 61 30 33 0.027 6697 25 00 25 M8 x 1.25 46 67 30 38 0.030 6697 40 00 40 M8 x 1.
II Compressor outlets (absorption of vibration) II To bypass obstacles and join different levels II Expansion loops II Max.
Pipe-to-pipe and stud connectors II Quick connection II Full bore design: consistent inner diameter for both pipe and connectors Ø PIPE-TO-PIPE CONNECTOR L 16.5 25 ØD ØG 40 Z II Interchangeable (applicable to Ø16.5, Ø25 and Ø40) and reusable II Non-flammable materials (UL94-HB standard) Z Transair® ØD ØG L Z Kg 6606 17 00 16.5 34 120.5 35 0.065 6606 25 00 25 44.5 151.5 48 0.130 6606 40 00 40 67 205 57 0.
PRODUCT RANGE 90° ELBOW Ø 16.5 25 40 Ø 50 63 Transair® ØD 6602 17 00 16.5 6602 25 00 25 6602 40 00 40 Transair® ØG L Z Kg 34 58 31 0.065 44.5 69.5 40 0.120 67 103 62 0.410 ØD ØG L Z Kg 6602 50 00 50 80 116 56 0.804 6602 63 00 63 91 124 61 0.970 L Z ØD Z L ØG Ø 76 100 168 ØD 90° Z H Z ØD Transair® ØD H Z Kg RX02 L1 00 76 227 189 1.033 RX02 l3 00 100 278 227 1.417 RA02 L8 00 168 269 185 3.
Pipe-to-pipe and stud connectors EQUAL TEE Ø 16.5 25 40 Ø 50 63 Z1 L G H L Z1 Z2 Kg 16.5 34 58 120.5 34 31 0.100 6604 25 00 25 44.5 67 151 48 40 0.185 6604 40 00 40 67 102 205 57 57 0.590 Transair® ØD G H L Z1 Z2 Kg 6604 50 00 50 80 156 231 56 56 1.200 Z2 6604 63 00 63 91 122 245 61 61 1.435 H L Ø 76 100 168 ØD 6604 17 00 ØD Z1 ØG Transair® Transair® Z1 ØD Z2 ØD L Z1 Z2 Kg RX04 L1 00 76 292 146 146 1.
PRODUCT RANGE Ø 76 100 THREADED TEE L Transair® Z1 ØD Z2 L Z1 Z2 Kg RX23 L1 04 76 ØD G1/2 C 290 145 63 0.892 RX23 L3 04 100 G1/2 310 155 76 1.564 Use 2 connectors RR01 to connect threaded tee RX23 to Transair® aluminium pipe Ø76 or Ø100. C EQUAL Y ØD Z1 45° Ø 63 76 100 168 H ØD ØD Z1 L Z2 Transair® ØD H L Z1 Z2 Kg RA26 63 00 63 257 432 280 152 2.825 RA26 L1 00 76 254 366 260 106 3.238 RA26 L3 00 100 290 396 280 116 3.
PIPE-TO-PIPE AND STUD CONNECTORS Ø 16.5 25 40 Ø 50 63 PLUG-IN REDUCER L ØD1 ØG ØD2 Transair® ØD1 ØD2 ØG Z L Kg 6666 17 25 25 16.5 34 51 77 0.052 6666 25 40 40 25 44.5 71 100.5 0.126 Transair® ØD1 ØD2 ØG L Kg 6666 25 50 50 25 45 97 0.210 6666 40 50 50 40 67 116 0.317 6666 40 63 63 40 67 120 0.373 6666 50 63 63 50 80 125 0.520 Transair® ØD1 ØD2 L Kg 76 50 220 0.530 RX64 L1 63 76 63 230 0.584 RX64 L3 50 100 50 343 1.
Ø 16.5 25 40 ØG Ø 50 63 ØD H E C Transair® ØD C E ØG H Kg 6605 17 13 16.5 R1/4 9.5 34 62.5 0.100 6605 17 21 16.5 R1/2 12 34 65 0.110 6605 25 21 25 R1/2 15 44.5 70 0.166 6605 25 27 25 R3/4 16 44.5 71 0.176 6605 25 34 25 R1” 16 44.5 71 0.230 6605 40 34 40 R1” 16 67 111 0.585 6605 40 42 40 R1”1/4 19.5 67 111 0.510 6605 40 49 40 R1”1/2 24.5 67 115 0.625 Transair® ØD C E ØG H Kg 6605 50 49 50 R1”1/2 22.6 80 119 1.
Pipe-to-pipe and stud connectors MALE STUD 90° ELBOW - BSP TAPER Ø 16.5 25 40 50 63 Transair® ØD C E ØG H J L Z1 6609 17 13 16.5 R1/4 11.9 34 17 34 58 6609 17 21 16.5 R1/2 16 34 23 34 58 6609 25 21 25 R1/2 16 44.5 27 45.5 6609 25 27 25 R3/4 17.4 44.5 27 45.5 6609 25 34 25 R1” 20.3 44.5 36 6609 40 34 40 R1” 20.3 67 41 J 6609 40 42 40 R1”1/4 22.6 67 H C 6609 40 49 40 R1”1/2 22.6 6609 40 48 40 R2” 26.
Ø 25 40 Transair® ØD ØG L L1 L2 N Z E S Kg 6651 25 12 04 25 44.5 271 155 25 35 107 G3/4” G3/8” 1.045 6651 40 12 04 40 67 400 210 30 50 150 G1”1/4 G1/2” 2.285 PRODUCT RANGE MANIFOLD 4 ports manifold, supplied with 4 Ø12mm plugs L1 L2 N C ØD 46 N N N N H Z Z L K MN Transair® ØD C L L1 L2 K N Z H M Kg 6652 25 21 06 25 G1/2 463 300 25 448 50 204 74 86.5 2.300 6652 40 21 06 40 G1/2 526 310 30 469 50 217 83 104.5 3.
BALL VALVES AND BUTTERFLY VALVES Transair® ball valves and butterfly valves placed regularly throughout the network and at key locations, such as compressor outlets and upstream of pneumatic tools, allow ease of system isolation and pipe work reconfiguration / maintenance. II Quick connection II These valves are silicone-free. LOCKABLE DOUBLE BALL VALVE Ø 16.5 25 40 50 63 N Z1 Z2 H ØD G G L Transair® ØD ØG L 4092 17 00 16.
PRODUCT RANGE DOUBLE FEMALE BALL VALVE Transair® C DN Pmax. (bar) E F H L M Kg VR03 00 02 G1/4 10 30 11.4 20 43 51.5 98 0.157 VR03 00 03 G3/8 10 30 11.4 20 43 51.5 98 0.141 VR03 00 04 G1/2 15 30 13.5 25 47 55 98 0.204 VR03 00 06 G3/4 20 30 12.5 31 58 57.5 122 0.310 VR03 00 08 G1” 25 30 15 38 60 69.5 122 0.460 VR03 00 10* G1”1/4 32 25 17 48 77 81.5 153 0.751 VR03 00 12* G1”1/2 40 25 28 54 83 95 153 1.
Quick assembly direct feed brackets II Optimum flow II Compact II Well adapted for most OEM applications and for use with neutral gases II Quick installation without any cutting of pipe For rigid drops with horizontal take off or for all types of air supply with rigid pipe or flexible hose on an installation which incorporates an efficient air dryer. QUICK ASSEMBLY DIRECT FEED BRACKET Ø 25 40 50 63 ØD1 ØD2 RA69 25 17 25 16.
II Integral water retention device II Very high flow II Quick installation without any cutting of pipe New generation quick assembly brackets are recommended for vertical or horizontal take-offs, using either rigid pipe or flexible hose. PRODUCT RANGE QUICK ASSEMBLY BRACKETS QUICK ASSEMBLY BRACKETS Ø 25 40 Transair® ØD1 ØD2 M ØG L N Z Kg 6662 25 17 25 16.5 140 35 36 63.5 82 0.109 6662 25 00 25 25 134 45 36 63.5 74 0.124 6662 40 17 40 16.5 154 35 37.5 76.5 89 0.
QUICK ASSEMBLY BRACKETS WITH BALL VALVE or COUPLER Quick assembly brackets with pre-assembled ball valve or coupler allow time savings during installation. N M L1 Ø 25 40 50 63 ØD 1 L2 L C QUICK ASSEMBLY BRACKET WITH PRE-ASSEMBLED BALL VALVE - BSP PARALLEL Transair® ØD C L L1 L2 M N Kg 6669 25 21 25 G1/2 256 32 155 40 23 0.43 6669 40 21 40 G1/2 271 39 162 45 31 0.45 6669 40 27 40 G3/4 304 39 176 45 31 0.62 6669 50 21 50 G1/2 249 46 133.5 87 32 0.
PRODUCT RANGE PRESSURISED SYSTEM OUTLETS II Ideal for fast assembly of new pressurised outlets, without venting the compressed air network. II The drilling tool can be used with most standard drills. We recommend, however, that the pipe work network is drained prior to the addition of an outlet. Thanks to the lateral dismantling capability of Transair® pipe and the use of quick assembly brackets, this operation can be completed very quickly (less than 7 min.
WALL BRACKETS II 1, 2 or 3 ports II For wall or machine mounting II Secondary outlet G1/4" for exhaust II Supplied with end-caps Ø 16.5 25 II Full silicone-free range 1 PORT 45° WALL BRACKET WITH BALL VALVE BSP PARALLEL Transair® ØD C1 C2 H K N Z Kg 6678 17 21 16.5 G1/2 G1/4 130 6678 25 21 25 G1/2 G1/4 153 87 96 104 0.879 86 117 124 1.502 Supplied with G1/2" end cap Lockable Ø 16.
PRODUCT RANGE 66,5 ØD Ø 16.5 25 1 PORT 45° WALL BRACKET - BSP PARALLEL Z 19,5 H N C2 46 C1 K Transair® ØD C1 C2 H K N Z Kg 6639 17 21 16.5 G1/2 G1/4 89.5 84.5 82 63.5 0.530 6639 25 21 25 G1/2 G1/4 92.5 84.5 82 63.5 0.535 Supplied with G1/2’’ end cap 2 PORT 90° WALL BRACKET - BSP PARALLEL Ø 16.5 25 Transair® ØD C1 C2 ØG H K N Kg 6681 17 21 16.5 G1/2 G1/4 34 65 74.5 82 0.422 6681 25 21 25 G1/2 G1/4 44.5 81 74.5 82 0.
WALL BRACKETS M C1 1 PORT 45° THREADED WALL BRACKET - BSP PARALLEL H 19,5 N 46 C2 C3 K Transair® C1 C2 C3 H K M N Kg 6641 21 21 G1/2 G1/2 G1/4 64 84.5 66.5 82 0.539 Supplied with G1/2" end cap 2 PORT 90° THREADED WALL BRACKET - BSP PARALLEL Transair® C1 C2 C3 H K M N Kg 6686 21 21 G1/2 G1/2 G1/4 48 72.5 66.5 82 0.415 Supplied with G1/2" end caps M C1 H 19,5 N C3 46 C2 K L C1 C2 C3 H K M N Kg 6690 21 21 G1/2 G1/2 G1/4 64 84.5 66.5 82 0.
PRODUCT RANGE 1 PORT 45° WALL BRACKET WITH COUPLER Ø 16.5 25 Transair® ØD Profile Bore (mm) Kg 6677 17 A1 16.5 ARO 5.5 0.661 6677 17 E4 16.5 EURO 7.2 0.664 6677 17 U1 16.5 ISO B 5.5 0.615 6677 17 U2 16.5 ISO B 8 0.668 6677 25 A1 25 ARO 5.5 0.658 6677 25 E4 25 EURO 7.2 0.661 6677 25 U1 25 ISO B 5.5 0.640 6677 25 U2 25 ISO B 8 0.665 Profile Bore (mm) Kg 2 PORT 45° WALL BRACKET WITH COUPLERS Ø 16.5 25 Transair® ØD 6692 17 A1 16.5 ARO 5.5 0.
TOOLS TOOL CASE Ø 16.5 ↓ 63 Ø 16.5 ↓ 168 Ø 25 40 50 63 Transair® H L I Kg 6698 00 05 315 290 105 5.300 Content of tool case 6698 00 05: - Drilling jig 6698 01 03 - Drilling tools 6698 02 01 and 6698 02 02 - Cutter for rigid pipe 6698 03 01 - Deburring tool 6698 04 02 - Set of tightening spanners 6698 05 03 - Marking tool 6698 04 03 - Chamfer tool 6698 04 01 TUBE CUTTER WITH DEBURRING TOOL Transair® L 6698 03 01 230 EW08 00 03 600 Kg For Transair® pipe 98 0.886 Ø 16.
PRODUCT RANGE Ø 16.5 ↓ 100 DEBURRING TOOL FOR RIGID ALUMINIUM PIPE Ø 16.5 25 40 Transair® L Kg 6698 04 02 140 0.026 CHAMFER TOOL FOR RIGID ALUMINIUM PIPE Transair® H Kg 6698 04 01 64 0.104 MARKING TOOL FOR RIGID ALUMINIUM PIPE Ø 16.5 25 40 Transair® H L1 L2 Kg 6698 04 03 88 73 33 0.042 L1 H L2 The marking tool enables connection guidelines to be marked on cut lengths of Transair® pipe.
TOOLS PORTABLE TOOL KIT Ø 76 100 168 Transair® V Kg EW01 00 01 220 9.240 EW01 00 03 110 9.240 This case contains: 1 portable tool, 1 14.4 V battery and 1 battery charger. Ø 76 100 168 L2 JAW SET FOR PORTABLE TOOL Transair® L1 E1 Ø 76 100 168 E2 ØD E1 E2 L1 L2 Kg EW02 L1 00 76 103 52 154 46 2.603 EW02 L3 00 100 103 71 154 46 2.868 EW02 L8 00 168 103 71 154 46 2.800 14.
PRODUCT RANGE FIXTUREs AND ACCESSORIES U-Channel Transair® L H B Kg 6699 01 01 2000 30 30 1.584 U-CHANNEL FIXING BRACKET Transair® L H Kg 6699 01 02 50 123 0.176 U-CHANNEL HAMMERFIX NUT Transair® L G Clip ØD Kg 6699 01 03 50 M10 50 - 63 - 76 - 100 0.050 6699 01 04 40 M8 16.5 - 25 - 40 0.020 U CHANNEL FIXTURE BRACKET FOR FIXING ON RSJ Transair® L H Kg 6699 03 02 50 80 0.080 CANTILEVER ARM Transair® B H L Kg 6699 01 06 48 110 500 0.
FixTUREs AND ACCESSORIES PUSH-ON TYPE BEAM CLAMP Transair® Ø 16.5 ↓ 100 ØT Max. carrying load (kg) H K Kg 6699 02 01 44 1.5 à 3 M8 68 0.022 6699 02 02 46 3à8 M8 68 0.029 6699 02 03 54 8 à 14 M8 68 0.030 6699 02 04 66 14 à 20 M8 68 0.031 6699 02 05 44 1.5 à 3 M10 68 0.020 6699 02 06 46 3à8 M10 68 0.031 SCREW TYPE BEAM CLAMP Ø 16.5 ↓ 100 Transair® ØT2 ØT ØT1 K Max. carrying load (kg) Kg 6699 03 01 10.7 6.5 10.7 18 45 0.
PRODUCT RANGE FRL, AUTOMATIC DRAINS AND ACCESSORIES Transair® FRLs are ideal for general purpose use and can be fitted downstream of the compressed air installation and at the take-off point on workstations and machines. II Air quality at FRL inlet: dry, damp, lubricated II Transair® FRL products are guaranteed silicone free II Chemical resistance to compressor oils FILTER REGULATOR LUBRICATOR WITH GAUGE C Recommended Flow Bowl Capacity Max. Inlet Pressure Max.
Frl, AUTOMATIC DRAIN AND ACCESSORIES All these products can be easily connected to Transair®, compressed air pipework systems using the following Transair® stud fittings: II 6605 17 13 or 6609 17 13 for G1/4" port II 6605 17 21 or 6609 / 6619 25 21 for G1/2" port FILTER SEPARATOR Transair® Max. Recommended Bowl Max. Inlet Outlet Flow Capacity Pressure Pressure C T°C at 10 bar Filtration Kg 6702 00 13 G1/4 33m3/h 22cm3 16 bar 8 bar 0°C à +50°C 30 µm 0.
PRODUCT RANGE AUTOMATIC DRAIN Transair® C Kg 6706 00 21 G1/2 0.340 Automatic condensate drain with float. PRESSURE GAUGE Transair® C Ø Face mm Kg Associated FRL 6798 00 05 G1/8 40 0.077 6700 00 13 - 6701 00 13 6798 00 06 G1/4 50 0.098 6700 00 21 - 6701 00 21 To be mounted on the front face of filter regulator 6700 and regulator 6701. PROTECTION BOWL Transair® C Kg 6798 00 07 G1/4 0.070 6798 00 08 G1/2 0.
Hose reels – Blowgun - RECOIL TUBING II Working temperature: -15°C to +70°C Blowgun II Dusting, cooling and drying components II Removing swarf, Cleaning machinery II Max.
PRODUCT RANGE HOSES AND TAILPIECE ADAPTORS Braided PVC Hose II Resistant and suitable for direct supply to machinery and hose reels, etc. II Fluid: compressed air II Max. working pressure at 23°C: 20 bar II Working temperature: from -15°C to +60°C BRAIDED BLUE PVC HOSE 25m Transair® 25 m Øout. Øin. Bend Radius Kg 1025V12 04 06TR 12 6 50 3.080 1025V14 04 08TR 14 8 65 3.280 1025V16 04 10TR 16 10 75 4.040 1025V20 04 13TR 20 13 90 5.360 1025V24 04 16TR 24 16 125 8.
Composite automatic safety couplers II To securely connect and disconnect devices and tools from Transair® quick assembly brackets or wall brackets II Very high flow, extremely low pressure loss II Lightweight and robust II Improved hand grip II Fast vent time II Male thread with integral seal ISO B 5.5 mm SAFETY ISO B 8 mm SAFETY EURO 7.2 mm For heavy duty or dusty applications, we recommend the use of the automatic metal couplers (pages 60/61).
PRODUCT RANGE Transair® composite automatic couplers disconnect by a double twist of the sleeve – a safety feature that breaks deliberately with common practice in order to avoid accidental disconnection. II 100% safety - ISO 4414 1st rotation in direction of the arrow : circuit rapidly flushed out, probe side. ISO B 5.
METAL AUTOMATIC SAFETY COUPLERS II M ax. working pressure: - mode)s ISO B 6 and 8 mm: 16 bar - models ISO C 6, 8 and 11 mm:12, 10 and 8 bar II Safety: disconnection in 2 stages II Suitable Fluids: -models ISO B 6 and 8mm: compressed air, vacuum, inert gas -models ISO C 6, 8 and 11mm: compressed air, vacuum, inert gas FEMALE BODY, BSP PARALLEL MALE BODY, BSP TAPER C DN Transair® C DN BODY WITH HOSETAIL 9D05 09 13P4 R1/4 5.5 9D14 09 13P4 G1/4 5.5 Transair® 9D05 09 17P4 R3/8 5.
ISO B 5.
CONNECTION ACCESSORIES II Nickel-plated brass II BSP parallel and taper straight male bsp tAPER, EQUAL/UNEQUAL ADAPTOR L C1 F C2 Transair®+ C1 C2 F EF00 00 02 R1/4 R1/4 EF00 02 03 R1/4 R3/8 EF00 02 04 R1/4 EF00 03 04 R3/8 EF00 00 04 EF00 04 06 L Kg 14 27 0.018 17 27.5 0.026 R1/2 22 30.5 0.046 R1/2 22 31 0.046 R1/2 R1/2 22 33.5 0.045 R1/2 R3/4 27 37.5 0.084 EF00 00 06 R3/4 R3/4 27 40 0.090 EF00 06 08 R3/4 R1’’ 34 43 0.
PRODUCT RANGE INCREASER MALE BSP TAPER TO FEMALE BSP PARALLEL Transair® E1 L E2 C2 F C1 C1 C2 E1 E2 F L Kg EF06 02 03 R1/4 G3/8 8 11.5 22 14.5 0.031 EF06 02 04 R1/4 G1/2 8 15 27 18 0.036 EF06 03 04 R3/8 G1/2 9 15 27 18 0.053 EF06 04 06 R1/2 G3/4 11.5 10.5 29 24 0.043 EF06 04 08 R1/2 G1’’ 11.5 12 36 26.5 0.069 EF06 06 08 R3/4 G1’’ 13 12.5 36 28 0.074 EF06 08 10 R1’’ G1’’1/4 15 14 45 32 0.
CONNECTION ACCESSORIES L J C øG E J C2 E Ø G C1 L J Transair® EF12 00 04 Transair® G J L Kg G1/2 14 26 21 33.5 0.105 C1 C2 E G H J L Kg EF13 00 02 R1/4 G1/4 11 17 23.5 13 25.5 0.034 EF13 00 04 R1/2 G1/2 14 26 31 21 33.5 0.089 Transair® C 90° C EF14 00 04 E C H J L Kg R1/2 31 21 31 0.
EQUAL FEMALE TEE BSP PARALLEL C Transair® J E H EF15 00 04 øG L 2 C2 ØG E L 2 H E C1 ØG C2 H C E G H J L/2 Kg G1/2 14 26 33.5 21 33.5 0.144 MALE STUD BRANCH TEE, FEMALE BSP PARALLEL, MALE BSP TAPER L 2 J PRODUCT RANGE L 2 L 2 J C1 Transair® EF16 00 04 C1 C2 E G H J L/2 Kg R1/2 G1/2 14 26 31 21 33.5 0.129 MALE STUD RUN TEE, FEMALE BSP PARALLEL, MALE BSP TAPER Transair® C1 C2 E G H J L/2 Kg EF17 00 02 R1/4 G1/4 11 17 23.5 13 25.5 0.
66
INSTALLATION GUIDE transair® aluminium rangE installation GUIDE The Golden Rules of Installation 68 to 69 Installation Instructions 68 Best Practices 69 Aluminium Pipe 70 to 75 General 70 Aluminium Pipe Section 72 Pipe-To-Pipe & Stud Connectors 76 to 87 General 76 Connection / Disconnection 78 Practical Examples 81 Do’s / Don’ts 86 Quick Assembly Brackets 88 to 92 General 88 Fitting a Quick Assembly Bracket 89 Practical Examples 92 Flexible Hoses 93 to 97 General 93 Network Co
THE GOLDEN RULES OF installation Installation Instructions II General Prior to the installation of a Transair® compressed air distribution system, plan to install an adequate air filtration and drying system. Flexible Transair® hose can be installed at the start of the system in order to eliminate any sources of vibration and to facilitate maintenance operations. When maintaining or modifying a Transair® system, the relevant section should be vented prior to the commencement of any work.
INSTALLATION GUIDE Best Practices II W hen installing a Transair® system, the work should be performed in accordance with good engineering practices. II Bends and bypasses represent sources of pressure drop. II To avoid excessive pressure loss, use modular consoles to offset the network and to bypass obstacles. II Keep in-line pipe diameter reductions to a minimum. II M aintain a consistent level of good quality air by use of adequate filtration at the compressor outlet.
Transair® ALUMINIUM PIPE General Ø 16.5 Ø 25 DEBURRED AND CHAMFERED PIPE Ø 63 PrEsentation Pipe pre-drilled at each end with two 22 mm diameter holes, deburred and chamfered Ø 40 DEBURRED AND CHAMFERED PIPE Ø 76 Pipe lugged at each end, deburred and chamfered Transair® aluminium pipe is supplied "ready for use". No particular preparation (cutting, deburring, chamfering, etc.) is required.
MARKING Pipe calibration is a guarantee of secure connection and sealing Transair Aluminium 40x37 mm calibrated Pmax 13 bar (-20°C=>+60°C) 16 bar (-20°C=>+45°C) SH 117836/002 outside Ø (mm) x inside Ø (mm) INSTALLATION GUIDE Type of pipe Manufacturing Batch Operating Pressures The conveyed fluid can be instantly identifed by the colour of the pipe.
Transair® aluminium PIPE Aluminium Pipe Section Ø 16.5 Ø 25 - Ø 40 TOOLS PIPE-CUTTER FOR aluminium PIPE 6698 03 01 CHAMFER TOOL FOR aluminium PIPE 6698 04 01 DEBURRING TOOL FOR aluminium PIPE 6698 04 02 MARKING TOOL FOR aluminium PIPE 6698 04 03 2 1 3 4 PROCEDURE 1 - Cutting the pipe: - place the pipe in the pipe cutter - position the blade onto the pipe - rotate the pipe cutter around the pipe while gently tightening the wheel. 2 - Carefully chamfer the outer edges.
INSTALLATION GUIDE Ø 50 - Ø 63 PIPE-CUTTER 6698 03 01 DEBURRING TOOL FOR aluminium PIPE 6698 04 02 TOOLS DRILLING JIG FOR aluminium PIPE 6698 01 03 DRILLING TOOL FOR aluminium PIPE 6698 02 01 1 DRILL 7 2 3 4 7 PROCEDURE 7 1 - Cutting the pipe: - place the pipe in the pipe cutter - position the blade on the pipe - rotate the pipe cutter around the pipe while gently tightening the wheel. 2 - Carefully chamfer the outer edges.
Transair® aluminium PIPE Aluminium Pipe Section Ø 76 - Ø 100 - Ø168 TOOLS portable tool kit ref. EW01 00 01 (220V) oR EW01 00 03 (110V) file PIPE-CUTTER FOR aluminium PIPE 6698 03 01 (Ø76) EW08 00 03 (Ø100 AND Ø168) 2 1 1 - Cutting the pipe : - place the pipe in the pipe cutter - position the blade on the pipe - rotate the pipe cutter around the pipe while gently tightening the wheel. 3 PROCEDURE 2 – Carefully deburr and chamfer the outer and inner edges of the pipe with a file.
INSTALLATION GUIDE 4 > Manually open the jaws of the clamp and insert the aluminium pipe into the clamp as far as it will go. Release the jaws. Press the trigger and crimp the tube until a ‘snap’ sound is heard. > PROCEDURE Re-open the two jaws to remove the pipe. Position the clamp end next to the lug mark: this will avoid the lugs overlapping. Rotate the pipe slightly. Ø 76 Repeat the operation until the required minimum number of lugs for each diameter is achieved.
Transair® Pipe-To-Pipe & Stud Connectors General INSTANT CONNECTION BY MEANS OF A GRIPPING RING Seal Ø 16.5 Ø 25 Ø 40 Tightening Mark Gripping Ring Pipe Body Nut Ø16.5, Ø25 and Ø40 connectors secure instantly to Transair ® aluminium pipe. Simply insert the pipe into the connector up to the connector insertion mark. The internal gripping ring is then automatically secured and the connection is complete.
This torque guarantees the seal and safety of each connection. Before using Ø16.5, Ø25 or Ø40 connectors, ensure that these arrow marks are correctly aligned with each other. INSTALLATION GUIDE There are important visual markings on the bodies and nuts of Transair® Ø16.5, Ø25 and Ø40 connectors. These are represented by solid and empty arrows and indicate the optimum torque. When assembling Transair® connectors, the nuts are tightened to a pre-defined torque on the body of the connector.
Transair® Pipe-To-Pipe & Stud Connectors Connection / Disconnection Connection Ø 16.5 Ø 25 Ø 40 DISconneCTion 1 2 Simply insert the pipe into the connector up to the connection mark. To disconnect, unscrew the nut by one half turn and remove the pipe. Lateral dismantling: see page 84 of this catalogue. NB – when using end caps (6625) 78 The insertion length is greater for end caps than for other Transair® connectors.
Ø 50 Ø 63 1 2 3 4 5 6 INSTALLATION GUIDE ConneCTion DISconneCTion 7 1 - Unscrew one of the connector nuts and fit over the pipe. 2 - Position the SnapRing in the appropriate housings (2 holes at the end of the pipe). Position the SnapRing manually with one hand. 3 - Bring the nut towards the body, that has been previously positioned at the end of the pipe, until it stops against the double clamp. 4 - Tighten the nut by hand. 5 - Bring the two pipes150together.
Transair® Pipe-To-Pipe & Stud Connectors Connection / Disconnection Connection 1 2 3 4 5 6 7 8 Ø 76 Ø 100 Ø 168 See Assembly Guide 1 - Slip the cartridge over the end of the first pipe fully up to the shoulder. 2 - Bring the second pipe to the cartridge and slide fully up to the shoulder. 3 - Position the clamp over the cartridge / pipe assembly. 4 - Hand tighten the pre-fitted screws with an Allen key (6 mm for ø76 and ø100, 8mm for ø168).
INSTALLATION GUIDE Practical Examples Various Ø76, Ø100 and Ø168 configurations Changing direction with a 90° elbow 1 x RX02 / RA02 2 x RR01 Changing direction with a tee piece 1 x RX04 / RA04 3 x RR01 Connecting an end cap 1 x RA25 Connecting a circular flange and a connector rEduction 1 x RR01 1 x EW05 1 x EW06 Ø 100 Ø 168 1 x RA30 / RA31 1 x RR01 ø 76 Ø 100 1 x RR01 1 x RX66 / RA66 1 x RR01 Connecting a butterfly valve 1 x RR01 Connecting a flexible hose and a circular flange ONLY F
Transair® Pipe-To-Pipe & Stud Connectors Practical Examples connecting a Transair® Ø76, Ø100 or Ø168 netwok to a Transair® Ø63, Ø50, Ø40, Ø25, Ø16.5 network Ø 76 Ø 100 Ø 168 Ø168 168 Ø 63 RA04 L8 63 Ø168 Ø 50 Ø168 6606 63 00 + 6666 50 63 RA04 L8 63 Ø50 Ø168 Ø168 Ø 40 6606 40 00 6606 40 00 RX24 L1 40 RR63 L8 12 RX24 L3 40 6605 40 49 Ø168 Ø 25 RR61 L1 08 RR61 L3 08 Ø168 RR63 L8 12 6605 40 49 + 6666 25 40 Ø25 Ø 16.5 . Ø .
INSTALLATION GUIDE SYSTEM MODIFICATION FOR DIAMETERS Ø16.5 - Ø25 - Ø40 ONLY 1 2 REPLACING A PIPE-TO-PIPE CONNECTOR WITH A TEE 3 5 4 1 - Loosen the 2 nuts. 2 - Slide them along the pipe on either side of 4 - Slide the nuts of the tee and position the the connector. body of the tee between the 2 pipes such 3- Remove the body of the connector, that the solid and empty arrows are facing together with the nuts. Re-tighten the nuts each other.
Transair® Pipe-To-Pipe & Stud Connectors Practical Examples LATERAL DISMANTLING Ø 16.5 Ø 25 Ø 40 Loosen the nuts located on the side of the pipe to be removed and slide them along the pipe. Then remove the pipe. 1 2 3 150 mm mini 4 150 mm mini Ø 50 Ø 63 150 mm mini 150 mm mini 150 mm mini 1 - Loosen the connector nuts on the ends of the pipe to be removed 2 - Slide them along the pipe. 3 - Remove the SnapRing from its housings.
INSTALLATION GUIDE Transair® Ø 40 SHUT-OFF VALVE Remote shut-off valve Polyurethane twin tubing Pneumatic ON - OFF ON Application Assembled by simple and fast connection to aluminium pipe, the Transair® Ø40 remote shut-off valve allows network supply to be rapidly and safely opened and closed either at ground level or by remote control. The Transair® remote shut-off valve thus guarantees : • Personal safety, by eliminating all hazards related to working at heights.
Transair® Pipe-To-Pipe & Stud Connectors Do’s Ø 16.
Ø 16.
Transair® QUICK ASSEMBLY BRACKETS General The easy addition of a new drop or bypass onto an existing length of pipe is an important consideration for any air pipework system. Transair® quick assembly brackets are designed for this very purpose, without the need to cut the pipe. A "swans neck" built into the brackets retains condensate water in the main line.
INSTALLATION GUIDE Fitting a Quick Assembly Bracket to Ø 25 Ø 40 Ø 50 Ø 63 pipe tools required DRILLING TOOL FOR ALUMINIUM PIPE 6698 02 02 FOR Ø25 AND 6698 02 01 FOR Ø40, Ø50 AND Ø63. DRILL DEBURRING TOOL FOR ALUMINIUM PIPE 6698 04 02 DRILLING JIG FOR ALUMINIUM PIPE 6698 01 03 PERMANENT MARKER PEN 5 / 510/ 10 N.m 5 /N.m 10 N.m 1 PROCEDURE 2 1 - Mark the pipe at the desired position for the bracket, using the same locator mark when several take-off points need to be aligned uniformly.
Transair® QUICK ASSEMBLY BRACKETS Fitting a Bracket ON Ø 76 Ø 100 Ø 168 PIPE TOOLS REQUIRED DRILLING TOOLS FOR ALUMINIUM PIPE EW09 00 30 EW09 00 51 EW09 00 64 EW09 00 70 EW09 00 90 DEBURRING TOOL FOR ALUMINIUM PIPE 6698 04 02 1 DRILL 2 3 PROCEDURE 1- Drill the aluminium pipe at the desired position using drilling tool: • Ø76 - Ø 100: female thread 1” > drilling tool EW09 00 30 • Ø168: female thread 1”1/2 > drilling tool EW09 00 51 • Ø168: female thread 2” > drilling tool EW09 00 64 • Ø168: female t
INSTALLATION GUIDE CREATING VERTICAL AND USING THE SAME LOCATOR MARK HORIZONTAL TAKE-OFF POINTS 1 2 ADDING A VERTICAL BRACKET USING 2 LOCATOR MARKS ADDING AN OFF-SET BRACKET 91
Transair® QUICK ASSEMBLY BRACKETS Practical Examples FITTING A BRACKET TO A PRESSURISED Spacer SYSTEM Drill bit Threaded connector to screw onto the air intake Silencer attachment point Tool body TOOLS REQUIRED End cap Use the under pressure drilling tool (EA98 06 00) to fit a bracket to an existing pressurised system. This can be simply done with use of a standard drill. 1 2 1 - Position the pressurised system bracket and tighten with the recommended tightening torque.
INSTALLATION GUIDE Transair® FLEXIBLE HOSES General Transair® flexible hose can be easily connected to other Transair® components and can be rapidly installed without prior preparation or cutting. Thanks to is small bend radius, it requires minimum space and avoids mechanical stress within the network. Robust, Transair® flexible hose is resistant to both compressor oils and to fire. Level change R mini.
Transair® FLEXIBLE HOSES Network Connection Ø25 Ø40 1 - Loosen the nut on the stud fitting. 2 - Remove it. 3 - Move the swagged end of the hose onto the exposed stud thread. 4 - Tighten the nut.
Ø50 - Ø63 1- Loosen the nut on the stud fitting and remove it. 2 - Place the nut over the swaged end of the flexible hose. Place the pipe connector clamps in the 3- housings on the hose. 4- Slide the nut forward to the end of the flexible hose, and assemble onto the male thread. 5 - Tighten the nut using 6698 05 03 spanner set.
Transair® FLEXIBLE HOSES Network Connection Ø 76 - 100 - 168 USING A CLAMP 96
INSTALLATION GUIDE Do’s / Don’ts 97
ATTACHMENT AND SUPPORT Transair® Attachment L ø 150mm min. Transair® CLIP FOR Ø 16.5 Ø 25 Ø 40 Ø 50 Ø 63 RIGID PIPE PROPERTIES Dmax The Transair® fixing clip is the basic component for mounting pipe when installing. Ø16.5 – Ø25 – Ø40 – Ø50 - Ø63 Transair® aluminium networks. Only this clip should be used since it since it allows expansion and contraction of the pipe to occur freely. Ø To ensure good system stability, we recommend the use of at least 2 clips per pipe.
The Transair® 6697 00 03 spacer is used for fitting a run of Transair® pipe using different diameters. SPACER FOR Ø16.5 Ø25 Ø40 INSTALLATION GUIDE Transair® Attachment ExAmple: Ø 50 - Ø 63 Ø 40 - Ø 25 Spacer for Transair® clip Transair® FIXING CLIP FOR Ø 76 Ø 100 Ø 168 NETWORKS Ø L (m) Dmax (m) 76 3 2.5 76 6 5 100 3 2.5 100 6 5 168 3 2.5 168 6 5 To ensure good network stability, we recommend the use of at least 2 fixing clips per length of pipe.
ATTACHMENT AND SUPPORT Supporting a Transair® System DIRECTLY ONTO A WALL OFFSET FROM A WALL 1 2 1 - Remove the nut at the base of the pipe clip using a screwdriver. Insert the screw by passing it through the clip. U-CHANNEL TYPE MOUNTING BRACKET Transair® U-channel assemblies are used to offset networks and to bypass obstacles. They comprise sectional rail ref. 6699 01 01 and a series of attachment accessories 6699 01 02.
INSTALLATION GUIDE Supporting a Transair® System BENEATH A CABLETRAY Use the under-cabletray attachment ref. 6699 10 30 and suspend with threaded rod up to M10 diameter. M8 Ø 16.5 - Ø 25 - Ø 40 This attachment can be used to suspend networks from Ø16.5 to Ø100. M10 M8 / M10 Ø 50 - Ø 63 Ø 76 - Ø 100 - Ø 168 THREADED ROD ADAPTER C1 : M8 C2 : M10 Handy! The Transair® threaded rod adaptor 6697 00 02 allows Ø16.5, Ø25 and Ø40 Transair® pipe clips to be easily suspended under M10 threaded rod.
ATTACHMENT AND SUPPORT Supporting a Transair® System ON A METAL BEAM PUSH-ON TYPE BEAM CLAMP Position the clamps ref. 6699 02 xx or ref. 669903 xx onto the RSJ or beam in accordance with the minimum recommended number of attachments per length of pipe and the required distance between attachments, according to the diameter of the pipe. USING BEAM CLAMPS SCREW TYPE BEAM CLAMP U-CHANNEL BRACKETS 11 mm maxi. horizontal ASSEMBLY vertical ASSEMBLY Position the RSJ brackets ref.
INSTALLATION GUIDE Supporting a Transair® System UNDER Canalis Canalis KN 2 1 3 Canalis KS 1 2 3 1 - Mount the Transair® pipe clip onto the KS attachment. 2 - Suspend the attachment from the Canalis® network and secure with a screw. 3 - The support is ready.
6651 6666 RX64 + 6606 PRACTICAL INFORMATION Z2 Z Dimensions Z 6606/6676 Z (mm) Ø 16.5 35 Ø 25 48 Ø 40 Z Z Z 4230 Z Z 6606/6676 6606 - 6676 Ø 50 25 Ø 63 25 Z RA69 57 Z 6662 Z 6602/RX02/RA02 Z (mm) Ø 16.5 31 Ø 25 40 Ø 40Z1 Z Ø 50 62 6606 - 6676 Z2 Z Z Z Z1 56 Ø 63 61 Ø 76 189 Ø 100 6612 RX02/RA02 6604 Z Z1 1 6602 6602 Z 221 Z2 Ø 168 Z2 185 Z Z RX24 6612/RX12/RA12 6604 + Ø Z1 25 6602 6606 Ø 40 Z (mm) 32 Ø 16.
Z Z 6651 Z Z1 Z Z Z2 Z 4230 Z 6662 4230 47 Ø 40 -> Ø 25 63 Ø 25 -> Ø 25 74 Ø 50 -> Ø 25 66 Ø 40 -> Ø 16.
PRACTICAL INFORMATION Z Dimensions RA26 Z1 (mm) Z2 (mm) Z3 (mm) Ø 63 280 252 280 Ø 76 260 106 260 Ø 100 280 116 280 Ø 100 - > Ø 76 280 116 280 Ø 168 350 126 350 Ø 168 -> Ø 100 330 86 306 RA26 + 6606 Z1 (mm) Z2 (mm) Z3 (mm) Ø 76 -> Ø 40 344 106 260 Ø 76 -> Ø 50 330 106 260 Ø 76 -> Ø 63 330 106 260 Ø 100 - > Ø 63 330 116 280 RA26 RA26 + 6606 Z1 Z3 Z3 Z2 6602 6606 - 6676 Z RA07 + 6606 Z (mm) Ø 40 240 Ø 50 228 Ø 63 232 RA07 + 6606 Z Z RA07 Z 6
INSTALLATION GUIDE Expansion / Contraction In order to compensate for the effects of expansion and contraction due to variations in temperature, any fluctuations in the length of the Transair® aluminium pipe network should be calculated. L: EXPANSION CALCULATION length of Transair® straight line to be installed (in m) T: variation between temperature when installing and maximum operating temperature (in C°) L: line length variation (in mm) For Transair® Ø-16.
PRACTICAL INFORMATION Expansion / Contraction • For Transair® aluminium pipe networks Ø76 - Ø100 H L2 L2 L3 L3 CHANGING DIRECTION WITH A TEE PIECE H L2 = H x 6.67 L3 = H x 6.
INSTALLATION GUIDE • Maximum compensation: Ø16.
BENDING transair® ALUMINIUM PIPE All Diameters Thanks to their technical characteristics, Transair® aluminium pipe can be bended according to the following specifications: 110 Transair® R min. (mm) L min. (mm) ø 16.5 102 185 ø 25 154 185 ø 40 250 185 ø 50 300 185 ø 63 394 185 ø 76 317 185 ø 100 423 185 ø 168 700 185 R.min. L.min.
Final Commissioning II Transair® Advice for Final Commissioning of a Compressed Air Network Example - considering a system working at 6 bar pressure 1. Run compressor at 3bar pressure to check integrity of the Transair® system and that the compressors are running correctly. INSTALLATION GUIDE testing a network 2. Leave the pipework under pressure for a period of 12 hours overnight. During this period the Transair® system should be isolated from machines and tools (drop valves should be closed). 3.
112
TRANSAIR® STAINLESS STEEL RANGE TRANSAIR® STAINLESS STEEL RANGE for Industrial Water and Oil, Compressed Air, Vacuum and Inert Gas Technical Information 114 to 119 Technical Specifications 114 Chemical Compatibility 115 Sizing a Network 116 Transair Standards and Certifications 117 ® Material Stainless Steel Range 118 Transair® Connection Technologies 119 Product Range 121 to 133 Stainless Steel Pipe 122 Pipe-to-Pipe & Stud Connectors 124 Quick Assembly Bracket and Wall Brackets 1
TECHNICAL SPECIFICATIONS II Fluids • Industrial water • System compatible with additives (glycol or inhibitors) which prevent the formation of algae or fungus (list available upon request) • Lubricating oils • Compressed air (dry, wet, lubricated) • Vacuum • Inert gases (argon, nitrogen) • Others: please consult us Pressure (bar) II Maximum Working Pressure According to the Temperature Temperature (°C) II Working Pressure • 10 bar from -20°C to +60°C • 7 bar from -20°C to +90°C II Expansion C
1 Compatible 2 CHEMICAL PRODUCT Compatible (except for diameters 22-28 mm in bronze) SymboL SEAL SELECtion CHEMICAL PRODUCT Do not use 3 Symbol SEAL SELECTION EPDM FKM c2h4o 2 3 • Acetic acid (10%, 20°C) ch3cooh 2 3 • Acetic acid (50%, 20°C) CH3COOH 3 3 • Acetone, Propan-2-one, Dimethyl cetone C3H6O 1 3 • Air (dry) 1 1 • MPG, mono propylen glycol • Air (lubricated) 3 1 • Naphta NH3 + H2O 2 3 • Nitric acid NH4OH 3 3 • Nitrogen (gas) • Ammonium nitrate 2 2 • O
SIZING A NETWORK Select the Transair® diameter for your application, based on required flow against pressure drop. Estimated values for a closed loop network, a pressure of 4 bar with less than 10% pressure drop. Velocity: 4 m/s. Estimated Flow Rate Equivalent Length 32.8 ft 65.6 ft 98.4 ft 131.2 ft 164 ft 246 ft 328 ft 492 ft 656 ft 984 ft m /h l/s l/min cfm 10 m 20 m 30 m 40 m 50 m 75 m 100 m 150 m 200 m 300 m 0.5 0.14 8 0.3 22 22 22 22 22 22 22 22 22 28 1 0.
Transair® stainless steel range certifications fall within the standard and regulation universe described on pages 8 and 9 of this catalogue. Standards Related to Transair® Stainless Steel Pipe TECHNICAL INFORMATION transair® STANDARDS AND certifications II Transair® stainless steel range conforms to the standards below related to mechanical and chemical properties per diameter.
matERIAL STAINLESS STEEL RANGE Ø22 - Ø28 Ø42 - Ø60 Ø76 - Ø100 PIPE 316L Stainless Steel 304 Stainless Steel 304 Stainless Steel connectOr Body: bronze Gripping Ring: stainless steel Retaining cap: HR Polymer Body: HR Polymer Nut: HR Polymer Clamp: HR Polymer Clamp: treated steel Cartridge: HR Polymer and stainless steel 90° ELBOW Body: bronze Gripping Ring: stainless steel Retaining cap: HR Polymer Body:HR Polymer Nut: HR Polymer 304 Stainless Steel 45° ELBOW - 304 Stainless Steel 304 Sta
Transair® innovative technology takes into account the specific requirements of each diameter and provides the user with an optimum safety coefficient and easy connection. Space Washer Gripping Ring Seal Body Retaining Cap TECHNICAL INFORMATION Transair® conneCTion technologies Ø22 - Ø28mm Pipe-to-pipe and stud connectors in Ø22 and Ø28 can be immediately connected to Transair® stainless steel -pipe – simply push the pipe into the connector up to the connection mark.
120
PRODUCT RANGE TRANSAIR® STAINLESS STEEL RANGE PRODUCT RANGE Stainless Steel Pipe 122 Pipe-To-Pipe & Stud Connectors 124 Quick Assembly Brackets and Wall Brackets 129 Ball Valves and Butterfly Valves 130 Tools 132 Fixtures and Accessories 133 121
STAINLESS STEEL PIPE STAINLESS STEEL PIPE AISI 316L L Ø 22 28 ØD Transair Transair®® ØD ext.Ø int.Ø L(m) Kg TF03 N7 00 22 22 19.6 3 1.860 TF06 N7 00 22 22 19.6 6 3.720 TF03 N9 00 28 28 25.6 3 2.430 TF06 N9 00 28 28 25.6 6 4.860 int. Ø L(m) Kg STAINLESS STEEL PIPE AISI 304 Ø 42 60 Transair® L ØD ØD ext. Ø TX03 M4 00 42 42.3 39.1 3 4.902 TX06 M4 00 42 42.3 39.1 6 9.804 TX03 M6 00 60 60.3 57.1 3 7.053 TX06 M6 00 60 60.3 57.1 6 14.106 int.
PRODUCT RANGE STANDARDs Ø 22 - Ø 28 Ø 42 - Ø 60 Ø 76 - Ø 100 EN 10217-7 EN 10217-7 EN 10217-7 EN 10088-2, 1.4404 / AISI 316 L 1.4301 / AISI 304 1.4301 / AISI 304 DIN 17 457, EN 10217-7 DIN 17 457, EN 10217-7 DIN 17 457, EN 10217-7 DVGW - W541 EN 1127 D4 / T3 EN 1127 D4 / T3 Manufacturing Standards Grade Welding Standards Tolerances Volume AND MAss Value for 1 metre of pipe Ø ext (mm) Ø int (mm) Volume (l) Pipe mass (kg) Mass of the network full of water (kg) 22.0 19.6 0.30 0.627 0.
PIPE-TO-PIPE AND STUD CONNECTORS The range of Transair® pipe-to-pipe and stud connectors provides versatility of design. II Quick connection II Dismountable and reusable II Full bore design (consistent inner diameter for both pipe and connectors) v PIPE-TO-PIPE ConnectOr L Z Ø 22 28 Z Transair® ØD Seal ØD L Z Kg RR06 N7 01 EPDM 22 63.2 1.2 0.125 RR06 N9 01 EPDM 28 85.5 1.2 0.245 RR06 N7 02 FKM 22 63.2 1.2 0.125 RR06 N9 02 FKM 28 85.5 1.2 0.
PRODUCT RANGE Ø 22 28 90° ELBOW L Z ØD Z L ØD Transair® RR02 N7 01 EPDM ØD L Z Kg 22 43.6 13.2 0.160 RR02 N9 01 EPDM 28 56 14.5 0.266 RR02 N7 02 FKM 22 43.6 13.2 0.160 RR02 N9 02 FKM 28 56 14.5 0.266 L Z Transair® Ø 42 60 Z L ØD ØD ØG L Z Kg RP02 M4 01 EPDM 42 82 130 55 0.599 RP02 M6 01 EPDM 60 100 139 64 0.825 RP02 M4 02 FKM 42 82 130 55 0.599 RP02 M6 02 FKM 60 100 139 64 0.
PIPE-TO-PIPE AND STUD CONNECTORS t EQUAL TEE Ø 22 28 L L1 Z1 L1 Z1 Transair® ØD ØD Z2 ØD L Z1 Ø 42 60 Z1 Seal ØD L L1 Z1 Z2 Kg RR04 N7 01 EPDM 22 42.1 43.6 11.7 11 0.210 RR04 N9 01 EPDM 28 56 56 14.5 14.5 0.389 RR04 N7 02 FKM 22 42.1 43.6 11.7 11 0.210 RR04 N9 02 FKM 28 56 56 14.5 14.5 0.389 Transair® ØG ØD Z2 H Seal ØD ØG L H Z1 Z2 Kg RP04 M4 01 EPDM 42 82 260 130 55 55 0.894 RP04 M6 01 EPDM 60 100 279 139 64 64 1.
PRODUCT RANGE THREADED TEE Ø 22 Z1 Z1 ØD ØD2 Transair® Z2 RR23 N7 06 01 EPDM L1 RR23 N7 06 02 C L L L Ø 76 100 Z1 ØD Z2 FKM ØD C L L1 Z1 Z2 Kg 22 3/4” 42.1 30 11.7 13.7 0.189 22 3/4” 42.1 30 11.7 13.7 0.189 Transair® ØD C L Z1 Z2 Kg RX23 l1 04 76 G1/2 292 145 63 0.892 RX23 l3 04 100 G1/2 312 155 75.8 1.564 Use 2 connectors RR01 to connect threaded tee RX23 to Transair® stainless steel pipe Ø76 or Ø100.
PIPE-TO-PIPE AND STUD CONNECTORS END CAP L Transair® Ø 22 28 ØD Seal ØD L Kg RR25 N7 01 EPDM 22 41.1 0.081 RR25 N9 01 EPDM 28 54.5 0.146 RR25 N7 02 FKM 22 41.1 0.081 RR25 N9 02 FKM 28 54.5 0.146 Transair® ØD L Kg RR25 M4 00 42 85 0.465 RR25 M6 00 60 85 0.718 Transair® ØD L Kg 0.346 L Ø 42 60 ØD Ø 76 100 RX25 L1 00 76 106 RX25 L3 00 100 107.4 0.539 Use 1 connector RR01 to connect end cap RX25 to Transair stainless steel pipe Ø76 or Ø100.
w QUICK ASSEMBLY DIRECT FEED BRACKET Transair® Ø 42 60 76 100 Seal ØD C1 C2 E L Kg RR82 M4 06 01 EPDM 42 3/4 M10 49 88 0.445 RR82 M6 06 01 EPDM 60 3/4 M10 62 117 0.900 RR82 L1 08 01 EPDM 76 1” M12 50 137 1.950 RR82 L3 08 01 EPDM 100 1” M12 80 158 1.960 RR82 M4 06 02 FKM 42 3/4 M10 49 88 0.445 RR82 M6 06 02 FKM 60 3/4 M10 62 117 0.900 RR82 L1 08 02 FKM 76 1” M12 50 137 1.950 RR82 L3 08 02 FKM 100 1” M12 80 158 1.
BALL VALVES AND BUTTERFLY VALVES Transair® ball valves and butterfly valves placed regularly allow ease of system isolation, adaptation and maintenance. These valves are silicone-free. throughout the network and at key locations butterfly valve Seal ØD DN ØD1 M N1 N2 E Kg EPDM 42 32 73 100 18 192 178 56 33 1.700 VR02 M4 02 FKM 42 32 73 100 18 192 178 56 33 1.700 VR02 M6 01 EPDM 60 50 89 125 18 170 176 62 43 2.
PRODUCT RANGE BOLT KIT FOR STAINLESS STEEL FLANGE Transair® EW06 00 01 Ø 42 60 76 100 C L Number of Bolts Kg M16 60 x8 1.
TOOLS PORTABLE TOOL KIT Transair® Ø 42 60 76 100 EW01 00 01 220 V EW01 00 03 110 V This case contains : 1 portable tool, 1 14.4 V battery and battery charger.
PRODUCT RANGE FIXTURES AND ACCESSORIES THREADED ROD KIT Transair® C ER99 05 02 M8 ER99 05 03 M10 Contains 10 threaded rods 1 metre length, 50 nuts and 10 threaded connnectors.
134
installation GUIDE INSTALLATION GUIDE transair® STAINLESS STEEL RANGE The Golden Rules of Installation 136 to137 Installation Instructions 136 Best Practices 137 Transair® Stainless Steel Pipe 138 to 141 General 138 Pipe Section 139 Transair® Connectors 142 to 146 General 142 Connection / Disconnection 143 Practical Examples 146 Attachment and Support 147 Transair® Quick Assembly Brackets Fitting a Bracket Bending a Transair® Stainless Steel Pipe Z Dimensions 148 148 149 150 - 151 13
THE GOLDEN RULES OF INSTALLATION Installation Instructions II General When maintaining or modifying a Transair® system, the relevant section should be purged prior to the commencement of any work. Installers should only use Transair® components and accessories, in particular Transair® pipe clips and fixture clamps. The technical properties of the Transair® components, as described in the Transair® catalogue, must be respected.
INSTALLATION GUIDE Best Practices II When installing a Transair® system, work should be performed in accordance with good engineering practice. II Bends and bypasses represent sources of pressure drops. II Keep in-line pipe diameter reductions to a minimum. II T he diameter of the pipe will influence pressure drop and the operation of point-of-use equipment. II Select the diameter according to the required flow rate and acceptable pressure drop at the point of use.
TRANSAIR® STAINLESS STEEL PIPE General PRESENTATION Transair® stainless steel pipe is supplied “ready for use”. No particular preparation (cutting, deburring, chamfering, etc.) is required. Thanks to the rigidity of Transair® stainless steel pipe, temperature-related expansion / contraction phenomena are reduced to a minimum. The Transair® network retains its straightness, and hence its performance, over time (reduction of pressure drop caused by surface friction).
INSTALLATION GUIDE Pipe Section Ø 22 Ø 28 TOOLS PIPE-CUTTER 6698 03 01 CHAMFERING TOOL 6698 04 01 MARKER PEN DEBURRING TOOL 6698 04 02 2 1 PROCEDURE 3 4 L Ø22: L = 30.4 Ø28: L = 41.5 1 - Cutting the pipe: - place the pipe into the pipe cutter - position the blade onto the pipe - rotate the pipe cutter around the pipe while gently tightening the wheel. 2 - Carefully chamfer the outer edges 3 - Also deburr the interior end of the pipe 4 - Mark the connection indicator.
TRANSAIR® STAINLESS STEEL PIPE Pipe Section Ø 42 -Ø 60 Ø 76 - Ø 100 PIPE-CUTTER FILE DEBURRING TOOL TOOLS PORTABLE TOOL KIT REF. EW01 00 01 (220V) OR EW01 00 03 (110V) PIPE FORMING JAW SET REF.
INSTALLATION GUIDE 2 - PREPARATION OF THE PORTABLE TOOL KIT * Open the retaining pin at the front of the machine by pressing the jaw to release button*. Place the jaws in the housing. Lock in position by closing the retaining pin. 3 - HOW TO CREATE THE LUGS > PROCEDURE Manually open the jaws of the clamp and insert the stainless steel pipe into the clamp as far as it will go. Ø 42 > Release the jaws. Press the trigger and crimp the tube until a ‘snap’ sound is heard.
TRANSAIR® CONNECTORS General INSTANT CONNECTION BY MEANS OF A GRIPPING RING Seal Retaining Cap Gripping Ring Ø 22 Ø 28 Pipe Space Washer Body Pipe-to-pipe and stud connectors in Ø22 and Ø28 can be immediately connected to Transair® stainless steel pipe – simply push the pipe into the connector up to the connection mark. The gripping ring of each fitting is then automatically secured and the connection is safe.
INSTALLATION GUIDE Connection / Disconnection Ø 22-28 TOOLS DISMOUNTING TOOL EW11 00 01 ConneCTion 1 2 DISconneCTion PROCEDURE 1 5 2 3 4 7 6 8 143
Transair® CONNECTORS Ø 42 Ø 60 CONNECTION / 1 2 3 4 5 6 DISCONNECTION 1 2 3 REPLACE 1 CONNECTOR BY A TEE LATERAL DISMOUNTING 1 - Cut the pipe and create the lugs (cf pages 141) Ø L (mm) 42 105 60 123 2 - Connect the pipe ADD 1 TEE 1 - Cut the pipe and create the lugs (cf pages 141) 144 2 - Connect the pipe Ø L (mm) 42 110 60 128
1 2 3 4 5 INSTALLATION GUIDE Connection / Disconnection 6 Ø 76 Ø 100 1 - Slip the cartridge over the end of the first pipe fully up to the shoulder. 2 - Bring the second pipe to the cartridge and slide fully up to the shoulder. 3 - Position the clamp over the cartridge / pipe assembly. 4 - Hand tighten the pre-fitted screws with a 6mm Allen key. 5 - Pull the pipes fully back towards the outside of the clamp. 6 - Tighten the clamp screws as follows: - mini tightening torque: 10 N.
Transair® CONNECTORS Practical Examples Various Ø76 and Ø100 configurations Changing direction with a 90° elbow 1 x RX02 2 x RR01 Changing direction with a tee piece 1 x RX04 3 x RR01 Connecting an end cap 1 x RX25 1 x RR01 Connecting a circular flange and a connector 1 x EW06 rEduction Ø 100 1 x RX30 1 x RR01 ø 76 1 x RR01 L3 01/02 1 x RX66 L3 L1 1 x RR01 L1 01/02 Connecting a butterfly valve 1 x RR01 146 1 x RX30 1 x VR02 N x EW06 1 x RX30 1 x RR01
INSTALLATION GUIDE FIXTURES AND ACCESSORIES ↓ ↓ Ø 22 ↓ Ø 100 L=3m L=6m Ø Dmax (m) Ø Dmax (m) 22 2.5 22 3 28 2.5 28 3 42 2.5 42 4 60 2.5 60 4 76 2.5 76 5 100 2.5 100 5 SCREW TYPE BEAM CLAMP Position the clamps ref. ER99 onto the RSJ or beam in accordance with the minimum recommended number of attachments per length of pipe and the required distance between attachments, according to the diameter of the pipe.
Transair® QUICK ASSEMBLY BRACKETS Fitting a Bracket ON Ø 42 Ø 60 Ø 76 Ø 100 PIPE TOOLS REQUIRED DRILLING TOOL FOR TRANSAIR® STAINLESS STEEL PIPE EW09 00 22 EW09 00 30 DRILL DEBURRING TOOL FOR TRANSAIR® STAINLESS STEEL PIPE 6698 04 02 1 2 PROCEDURE 3 1 - Drill the Transair® stainless steel pipe at the desired position using following drilling tools: • Ø42 - Ø60: drilling tool EW09 00 22 • Ø76 - Ø100: drilling tool EW09 00 30 148 2 - Carefully deburr the pipe.
All Diameters Thanks to their technical characteristics, Transair® stainless steel pipe can be bended according to the following specifications: R.min. Transair® R min. (mm) L min. (mm) ø 22 44 125 ø 28 56 125 ø 42 84 125 ø 60 93 125 ø 76 114 125 ø 100 152 125 INSTALLATION GUIDE BENDING a transair® STAINLESS STEEL PIPE L.min.
01 RR06 N7 - RR06 N9 RR05 N7 04 - RR05 N7 06 RR05 N1 09 PRACTICAL INFORMATION Z Dimensions Z2 Z Z Z RP02/RR02 Ø 22 01 Ø 28 Z (mm) RR23 N7 06 01 13 RP02 M4 M4 01 - RP02 M6M6 RP06 - RP06 15 Ø 42 55 Ø 60 64 RR02 N7 - RR02 N9 Z Z Z Z Z2 RP06 M4 01 - RP06 M6 RR02 N7 - RR02 N9 RR04 N7 01 - RR04 N9 Z Z Z1 Z RX23 L1RR04 04 - RX23 N9 N7L3 0104 RX04 L1 00 - RX04 L3 00 02 L3 00 Z Z1 Z Z Z Z2 Z (mm) Ø 22 1.2 RR04 N9 N7 01Ø 28 Z1 Z1 Z2 Z2 1.
RP06 M4 01 - RP06 M6 Z RR02 N7Z - RR02 INSTALLATION GUIDE Z Z RR23 N7 06 01 RR06 N9 N7 01 RP02 M4 - RP0 Z Z Z Z Z2 Z RR04 N9 N7 01 RX04 Z1 (mm) Z2 (mm) Ø 76 145 145 Ø 76 - > Ø 42 145 183 Ø 76 - > Ø 60 145 183 Ø 100 155 135 Ø 100 - > Ø 42 155 135 Ø 100 - > Ø 60 155 195 Ø 100 - > Ø 76 155 195 Z1 RR05 N7 04 - RR05 N7 RR05 N1 09 Z1 RX23 L1 04 - RX23 L RX04 L1 00 - RX04 L3 00 RX02 L1 00 - RX02 L3 00 Z2 Z1 Z Z Z Z2 Z2 RR23 N7 06 01 RR06 N9 N7 01 Z RX23 L1 04 - RX2
transair®: STAINLESS STEEL DROPS II To meet the requirements of compressed air and vacuum applications in harsh environments (food and beverage, pharmaceutical or laboratories), Transair® now proposes a complete range of Ø22 mm 316L stainless steel drops, II These modular drops with instant connection technology are very easy to clean and are resistant to aggressive chemical agents (list of chemical compatibility available upon request).
STAINLESS STEEL DROPS Instructions for Assembly and Disassembly of a Stainless Steel Drop Assembly: simply push the pipe into the fitting. Disassembly: 1. Manually unscrew the nut and slide the nut along the pipe. Disassembly : 2. Put the red dismounting ring on the pipe and rescrew the nut on the fitting. Disassembly : 3. Pull the pipe from the fitting. Disassembly : 4. Manually unscrew the nut and remove the red dismounting ring. Disassembly : 5.
PARKER PRODUCTS FROM THE TECHNICAL ROOM Coalescing and Activated Carbon Filters for Air and Compressed Gas Flow rate up to 31.250 m3/h. Operating pressure up to 350 bar. Designed for air and other compressed gases (natural gas, hydrogen, oxygen, nitrogen, argon, helium, etc.). Deliverables in accordance with the main international bodies (PED, ASME VIII div. 1 and 2, Ghost, China Stamp, LRofS, DNV, GL, ABS, etc.) including directives ISO12500 and ISO8573.1. Refrigeration Dryers • Flow up to 26 400 m3/h.
TO THE HEART OF PRODUCTION Chillers for Industrial Cooling • Refrigerating power up to 757 kW. • Special external and internal surface treatments for aggressive gases and environments. • Dedicated equipment for laser applications and special gases (biogas). • Bespoke installations according to requirements. Condensate Drains • For compressed air lines up to 66.000 m3/h. • Operating pressure up to 50 bar. Designed for corrosive gases and air. • Float, time delay and electronic level control versions.
PARKER PRODUCTS FROM THE TECHNICAL ROOM The Parker Solution Couples Excellent Purity of Conveyed Air and Gases with High Flow and Lower Operating Costs 156
TO THE HEART OF PRODUCTION 157
INDEX Transair ® 0000 01 68 0697 00 02TR 0697 00 03TR 0697 00 04TR 0697 00 05TR 0697 00 06TR 0697 00 07TR 0697 00 08TR 0697 00 09TR 1001E25 00 01 1001E25 00 03 1001E25 00 04 1001E40 00 02 1001E40 00 04 1001E40 00 05 1001E50 00 04 1001E50 00 09 1001E63 00 05 1001E63 00 06 1001E63 00 08 1003A17 04 00 1003A17 06 00 1003A25 04 00 1003A25 06 00 1003A40 04 00 1003A40 06 00 1003A50 04 1003A50 06 1003A63 04 1003A63 06 1004A17 02 1004A17 04 1006A25 02 00 1006A25 04 00 1006A25 06 00 1006A40 02 00 1006A40 04 00 1006A4
CA86 A1 04 CA86 E4 02 CA86 E4 03 CA86 E4 04 CA86 U1 02 CA86 U1 03 CA86 U1 04 CA86 U2 02 CA86 U2 03 CA86 U2 04 CA87 A1 02 CA87 A1 03 CA87 A1 04 CA87 E4 02 CA87 E4 03 CA87 E4 04 CA87 U1 02 CA87 U1 03 CA87 U1 04 CA87 U2 02 CA87 U2 03 CA87 U2 04 CA94 A1 06 CA94 A1 08 CA94 A1 10 CA94 E4 08 CA94 E4 10 CA94 E4 13 CA94 U1 06 CA94 U1 08 CA94 U1 10 CA94 U2 08 CA94 U2 10 CA94 U2 13 CP01 A1 02 CP01 A1 03 CP01 A1 04 CP01 E4 02 CP01 E4 03 CP01 E4 04 CP01 U1 02 CP01 U1 03 CP01 U1 04 CP01 U2 02 CP01 U2 03 CP01 U2 04 CP14 A
INDEX TA06 L8 04 TA06 L8 06 TF03 N7 00 TF03 N9 00 TF06 N7 00 TF06 N9 00 TX03 L1 00 TX03 L3 00 TX03 M4 00 TX03 M6 00 TX06 L1 00 TX06 L3 00 TX06 M4 00 TX06 M6 00 VF04 00 06 VR01 L1 00 VR01 L3 00 VR01 L8 00 VR02 63 00 VR02 L1 00 VR02 L1 01 VR02 L1 02 VR02 L3 00 VR02 L3 01 VR02 L3 02 VR02 L8 00 VR02 M4 01 VR02 M4 02 VR02 M6 01 VR02 M6 02 VR03 00 02 VR03 00 03 VR03 00 04 VR03 00 06 VR03 00 08 VR03 00 10 VR03 00 12 VR03 00 16 VR03 00 20 VR04 00 04 VR04 00 06 VR04 00 08 VR04 00 10 VR04 00 12 VR04 00 16 VR04 00 20
Parker Worldwide Europe, Middle East, Africa AE – United Arab Emirates, Dubai Tel: +971 4 8127100 parker.me@parker.com AT – Austria, Wiener Neustadt Tel: +43 (0)2622 23501-0 parker.austria@parker.com AT – Eastern Europe, Wiener Neustadt Tel: +43 (0)2622 23501 900 parker.easteurope@parker.com HU – Hungary, Budaörs Tel: +36 23 885 470 parker.hungary@parker.com ZA – South Africa, Kempton Park Tel: +27 (0)11 961 0700 parker.southafrica@parker.com IE – Ireland, Dublin Tel: +353 (0)1 466 6370 parker.