USB 3-in-1 Card Reader/Writer TS0MFLRD User’s Manual
Table of Contents Introduction Features................................................................................................ 1 Package Contents ............................................................................. 1 System Requirements ...................................................................... 1 Hardware Setup and Driver Installation Hardware Setup ................................................................................. 2 Driver Installation for Windows 98/98SE......
Introduction Thank you for purchasing Transcend’s 3-in-1 Card Reader/Writer, a small device designed for fast and easy data exchange from CompactFlash Cards, SmartMedia Cards, and IBM Microdrives. It is an easily installed device, which only needs a USB interface to allow its use by any PC, Mac or notebook computer. Features • • • • • • USB connection for true Plug and Play Compliant with USB specification version 1.1 Supports CompactFlash Card, SmartMedia Card, and IBM Microdrive USB bus powered.
Hardware Setup and Driver Installation Follow the steps below to install the 3-in-1 Card Reader/Writer and driver for the first time. Hardware Setup In Windows 98/98SE, the driver must be installed before hardware setup. 1. Plug the “device end” of the USB cable into the 3-in-1 Card Reader/Writer, and connect the other end of the USB cable into the USB port of the computer (as shown in the figure below). 2.
Driver Installation for Windows 98/98SE 1. Insert the Driver CD into the CD-ROM drive of your computer. 2. Click Start in the Windows Taskbar. Then, select Run to continue. 3. Type D:\WIN98\SETUP.EXE, where “D” is your CD-ROM drive. Click OK to continue. 4. Follow the on-screen instructions to complete driver installation.
4
5. The 3-in-1 Card Reader/Writer is ready for use. You can find two new Removable Disk drives with newly assigned drive letters in the My Computer window. Driver Installation for Windows 2000 Upon completion of hardware setup, Windows 2000 will auto detect your 3-in-1 Card Reader/Writer and install the default driver, which only supports SmartMedia Cards. You will need to use the driver provided with the Driver CD to upgrade the driver for access to the full functions of the 3-in-1 Card Reader/Writer. 1.
3. The System Properties window will appear. Select Hardware and click Device Manager to continue. 4. The Device Manager window will appear. Find Universal Serial Bus controllers, and double click on USB Mass Storage Device.
5. Click on Update Driver to continue. 6. The Upgrade Device Driver Wizard will appear. Click on Next to continue.
7. Select Display a list of the known drivers for this device so that I can choose a specific driver. Click on Next to continue. 8. Select Show compatible hardware and click Have Disk to continue. 9. Click Browse to locate the driver on the Driver CD (e.g., D:\Win2000, where “D” is the CD-ROM drive). Click on OK to continue.
10. Select ScanLogic Corp. in Manufacturers column. Click on Next to continue.
11. Click on Next to continue. 12. Click on Finish to complete the driver upgrade.
. Click on Close to close the window. Driver Installation for Windows Me/Windows XP Upon completion of hardware setup, Windows Me or Windows XP will auto detect your 3-in-1 Card Reader/Writer and install the default driver as USB Mass Storage Device. Your 3-in-1 Card Reader/Writer is ready for use. You can use your storage media and the 3-in-1 Card Reader/Writer like Removable Disks to transfer data to/from your computer.
3. Select ScanLogic USB Mass Storage Device and click on Stop to continue. 4. The Stop a Hardware device window will appear. Click on OK. 5. The Safe To Remove Hardware window will appear. Click on OK.
6. The 3-in-1 Card Reader/Writer is ready to be removed. Driver Installation for Mac OS 8.6 or Older 1. Insert the Driver CD into the CD-ROM drive of your computer. 2. TRANSCEND icon will appear. Find the install icon in TRANSCEND\OS 8.6 OR OLDER and double click on it. 3. Restart your computer. Driver Installation for Mac OS 9.0 or Later 1. Insert the Driver CD into the CD-ROM drive of your computer. 2. TRANSCEND icon will appear. Find the install icon in TRANSCEND\OS 9.
Specifications Power supply DC 5V from USB port Sockets CompactFlash Card Type I/II, SmartMedia Card, and IBM Microdrive LED Indicators Red: Power on Green: Data traffic for CompactFlash Card or IBM Microdrive Orange: Data traffic for SmartMedia Card Operating Temperature 0ºC ~ 65ºC Storage Temperature -20ºC ~ 70ºC Humidity 0% ~ 80% RH Emission/Safety FCC Class B, CE, BSMI Dimensions 71 x 63 x 17 mm Weight 41 g 14
3-in-1 Card Reader/Writer Limited Warranty “Above and beyond” is the standard we set ourselves for customer service at Transcend. We consistently position ourselves to be significantly above the industry norm. It’s all part of our commitment to Customer Satisfaction. All Transcend Information, Inc. (Transcend) products are warranted and tested to be free from defects in material and workmanship and to conform to the published specifications.