User's Manual

2. Thoroughly clean and dry the area of the windshield you wish to mount the DrivePro. If

possible, mount the DrivePro in the middle of the windshield near the rear-view mirror for the

best field of view.

3. Peel off the protective film from the mount bracket’s foam sticker, and firmly attach the

DrivePro to the windshield.

4. Turn the adjustment knob anticlockwise to loosen, and then adjust the DrivePro’s position.

5. After the DrivePro is in the best position, turn the adjustment knob clockwise to make sure

that the DrivePro is securely locked in place.

3-4 Connecting to Power

Note: Insert a microSD memory card before connecting the DrivePro to your car power

outlet.

1. Connect the micro USB cable to the DrivePro.