User manual

Safety Precautions︱

These usage and safety guidelines are IMPORTANT! Please follow them carefully.

General Use

• Unpack the contents of the StoreJet 35 Ultra package carefully.

• Avoid exposing your StoreJet 35 Ultra to extreme temperatures above 55℃ or below 5℃ during

operation.

• Never drop your StoreJet 35 Ultra.

• Never allow your StoreJet 35 Ultra to come in contact with water or any other liquids.

• Never use a damp/wet cloth to wipe or clean the exterior case.

• Do not use or store your StoreJet 35 Ultra in any of the listed environments:

o Direct sunlight

o Next to an air conditioner, electric heater or other heat sources

o In a closed car that is in direct sunlight

Setup

• Please ensure that you connect the USB cable to the StoreJet 35 Ultra and your computer correctly

(square end  StoreJet 35 Ultra, rectangular end  PC or Notebook)

• The supplied eSATA cable only works in eSATA ports and will not connect directly to your PC’s

internal motherboard SATA connector

• When using the Vertical Stand, allow at least 2” clearance between your PC, wall, etc. and the

StoreJet 35 Ultra’s cooling fan.

• When not using the Vertical Stand, always lay the StoreJet 35 Ultra on a flat stable surface with the

cooling fan side facing up.

• Never set anything on top of the StoreJet 35 Ultra or cover the cooling fan inlet.

Backing Up Data

• Transcend does NOT take any responsibility for data loss or damage during operation. If you

decide to store data on your StoreJet 35 Ultra we strongly advise that you regularly backup the data

to a computer, or other storage medium.

• To ensure eSATA / High-Speed USB 2.0 data transfer rates when using your StoreJet 35 Ultra with a

computer, please check the computer has the relevant eSATA / USB drivers. If you are unsure on

how to check this, please consult your computer or motherboard User’s Manual for eSATA or USB

driver information.

Power

• The StoreJet 35 Ultra is powered from your home’s power outlet using the included Power Adapter.

• Ensure nothing is resting on the power cables and that the cables are not located where they can be

tripped over or stepped on.

Reminders

Always follow the procedures in the “Disconnecting from a Computer” section to remove your StoreJet 35

Ultra from a computer.