User's Manual
Table Of Contents
- User Manual
- Wi-Fi SD
- Introduction
- Package Contents
- Features
- System Requirements
- Installing the Wi-Fi SD App
- Connecting to the Wi-Fi SD Card using iOS and Android Devices
- Connecting to a Smartphone Personal Hotspot
- Using the Wi-Fi SD App on iOS Devices
- Using the Wi-Fi SD App on Android Devices
- Settings
- Connecting to the Wi-Fi SD Card using Other Devices
- Restore Defaults (Return to Original Settings)
- Upgrading Firmware
- Troubleshooting
- Specifications
- Get more help
- Transcend Limited Warranty
Direct Share Settings
To configure basic wireless settings, tap Direct Share Settings.
WPA2 wireless security is enabled by default (Default password ‘12345678’). It is
recommended that you change the default SSID and password to differentiate your
Wi-Fi SD card from others that may be transmitting in your area.
Note: The password must be at least 8 characters long and no more than 64
characters. All ASCII characters are acceptable.
Direct Share settings on iOS device Direct Share settings on Android device