User's Manual
Table Of Contents
- User Manual
- Wi-Fi SD
- Introduction
- Package Contents
- Features
- System Requirements
- Installing the Wi-Fi SD App
- Connecting to the Wi-Fi SD Card using iOS and Android Devices
- Connecting to a Smartphone Personal Hotspot
- Using the Wi-Fi SD App on iOS Devices
- Using the Wi-Fi SD App on Android Devices
- Settings
- Connecting to the Wi-Fi SD Card using Other Devices
- Restore Defaults (Return to Original Settings)
- Upgrading Firmware
- Troubleshooting
- Specifications
- Get more help
- Transcend Limited Warranty
Upgrading Firmware
Use this function to keep your Wi-Fi SD card up-to-date with the latest firmware
version. When a newer version is released, go to www.transcend-
info.com/downloads to download it.
Note: To prevent data loss, it is recommended that you backup your data to another
location before upgrading the firmware of your Wi-Fi SD card.
1. Download the firmware files and insert the Wi-Fi SD card into your computer.
(depending on your computer setup, you may need to use an SD card reader)
2. Copy the firmware files to the root directory of Wi-Fi SD card.
3. Eject the drive and remove the Wi-Fi SD card from your computer.
4. Re-insert the Wi-Fi SD card into your camera.
5. Power on the camera and wait for 5 minutes.
6. After 5 minutes, turn camera power off and on again to complete firmware
upgrade.
IMPORTANT: Please disable power saving and do NOT power off your
camera during firmware upgrade. Any interruption during the process
may cause unexpected results.