USB Memory Stick Reader/Writer User’s Manual
Table of Contents Introduction Package Contents....................................................................................... 1 Features....................................................................................................... 1 System Requirements ................................................................................ 2 Hardware Setup & Driver Installation Installation for Windows Operating Systems Auto Mode....................................................................
Introduction Thank you for purchasing Transcend’s Memory Stick Reader/Writer. The USB key-chain type design of this device provides you with a convenient and fast data exchange mechanism (MP3, PDA, Digital Camera, data, etc…) with very easy Plug and Play installation.
System Requirements One standard USB port One of the following operating systems: Windows 98SE Windows 2000 Windows Me Windows XP Mac OS 8.6 Mac OS 9.X Mac OS X 10.
Step 2: Insert the Memory Stick Reader/Writer Driver CD into the CD-ROM drive and run the Setup.exe program. Step 3: The Installation Wizard will guide you through the complete installation process. Hardware Setup Step 1: Connect the Memory Stick Reader/Writer to an available USB port of your computer. Step 2: Your computer will automatically recognize the Memory Stick Reader/Writer and register the new devices necessary to use it.
Step 3: The Memory Stick Reader/Writer is ready for use. You can find a new Removable Disk drive with a newly assigned drive letter in the My Computer window. Manual Mode: Hardware Setup Before installing the device driver for your Memory Stick Reader/Writer, refer to the following instructions: Step 1: Power on the computer where you will connect the Memory Stick Reader/Writer and make sure that the USB port is enabled and working properly.
Driver Installation Windows 98SE Step1a: When you plug the Memory Stick Reader/Writer into a USB port on your computer, a driver installation message for USB MS Card Reader will appear. Step 1b: Please insert the Driver CD into the CD-ROM drive. Click “Next” to continue. Step 2: Click on “Search for the best driver for your device”. Click “Next” to continue.
Step 3a: Please choose “Specify a location”. Click on “Browse” to select the correct path to the driver folder. Step 3b: The Browse for folder window should open. Browse to your CD-ROM drive. Click on “Drive (E:)” (where E is the CD-ROM drive letter). Select the “Win98” folder. Click on “OK”.
Step 3c: Return to the previous window and click on “Next”. Step 4: Your computer should find “USB Memory Stick Reader/Writer”. Click on “Next” to continue.
Step 5: Please click on “Finish” to continue. Step 6: Your computer should find the “Memory Stick Reader/Writer” now. Click on “Next”.
Step 7: Please repeat Steps 2 to 4, with the driver located in the same path (e.g.,“E:\Win98”). Click “Next” to continue. Step 8: Please click on “Finish” to complete installation. Step 9: The Memory Stick Reader/Writer is ready for use. You can find a new Removable Disk drive with a newly assigned drive letter in the My Computer window.
To Uninstall You can uninstall the Memory Stick Reader/Writer and driver by running Uninstall from the Driver CD. Follow the onscreen instructions to complete the process. Make sure the Green LED light on the product is off before you unplug it from the computer.
Step 2: Right click on the “icon”. "Unplug or eject hardware" should appear. Left click to enter the removal window. Step 3: After the window shown below appears, please select the “USB Memory Stick Reader/Writer” and click on "Stop" to continue. Step 4: The “Stop a Hardware device” window shown below appears. Please click on "OK" for removal.
Step 5: When the “Safe To Remove Hardware” window appears, the Memory Stick Reader/Writer is ready to be disconnected. Click on “OK” If this removal procedure is not followed before disconnecting the Memory Stick Reader/Writer, the message “Unsafe Removal of Device” appears. Installation for Mac OS 8.6 Step 1: Please copy the contents of the folder Mac OS 8.6\MS from the Driver CD to: HD\System Folder\Extensions Folder. Step 2: Reboot your computer. Installation for Mac OS 9.X & Mac OS X 10.
Use of Memory Stick Reader/Writer with Mac OS 1. Plug the Memory Stick Reader/Writer into an available USB port. 2. Insert a Memory Stick into Memory Stick Reader/Writer. A disk icon will appear on the desktop. You can then use the Memory Stick as if it were a Mac HardDisk. 3. To change the Memory Stick: Drag and drop the drive icon (the one you'd like to change) into the trashcan. Remove the old Memory Stick (the one you'd like to change) from the Memory Stick Reader/Writer.
Memory Stick Reader/Writer Limited Warranty “Above and beyond” is the standard we set ourselves for customer service at Transcend. We consistently position ourselves to be significantly above the industry norm. It’s all part of our commitment to Customer Satisfaction. All Transcend Information, Inc. (Transcend) products are warranted and tested to be free from defects in material and workmanship and to conform to the published specifications.
