User's Manual

Basic Operation︱

Charging the Battery

Remove the MP330‟s cap and plug its USB connector directly into an available USB port on your desktop or

notebook computer. The MP330‟s internal Li-ion battery will begin charging. A battery charging indicator will

appear in the upper right hand corner of the player‟s screen. Leave the player plugged in until the battery

charging animation stops.

NEVER plug the MP330 into a USB hub or an external USB port located on a keyboard,

monitor or other peripheral. This can permanently damage your digital music player.

When charging the battery, Please plug the MP330 directly into your computer’s built-in USB port

or use the Transcend USB Power Adapter (optional).

Power ON

Press and hold the button to turn on the player. An animated logo will appear, followed by the player

status information. After the startup sequence, the Main Menu will be displayed, indicating the MP330 is ready

for use.

 It takes a few seconds for the MP330 to power up.

 If the lock icon appears on the display while powering on the MP330, this means

that the switch is enabled ( ). You must switch off the Hold mode ( ) before you can

power on the player.

Power Off

Press and hold the button to turn off the MP330.

 It takes a few seconds to completely power down.