Operation Manual

71
Note: Both connection modes will charge the internal battery, however when “USB Data Transfer”
is chosen, the player’s audio and video functions will not be available.
3. Use the / buttons to select your desired connection mode.
If you are using Windows®, a “Removable Disk” drive with a newly assigned drive letter will appear in
the My Computer window.
*Note: (F:) is an example drive letter – your “My Computer" window may differ
4. To transfer photos, videos, e-book text files, and non-protected music to the MP710, the USB
Connection Type in the Settings menu must be set to “USB Data Transfer.” With this connection type,
you can transfer files by simply dragging them onto the MP710’s Removable Disk drive letter. You can
also create your own folders within the MP710 and copy files directly to the folders.
5. Always disconnect the MP710 from a computer by selecting and following the instructions for the “Safely
Remove Hardware” icon that can be found on the Windows
®
Toolbar at the bottom of the computer
screen
NEVER unplug the MP710 during file transfer. Unplug the MP710 only when Windows informs
it is safe to do so.
Disconnecting the MP710 in Windows
®
XP, Vista, 7 and 8
1. Select the Hardware icon on the system tray.
2. The Safely Remove Hardware pop-up window will appear. Select it to continue.
3. A window will appear stating “The ‘USB Mass Storage Device’ device can now be safely removed from
the system.”
4. Unplug the MP710 from your computer.