Datasheet

ManualsBrandsTranscend Manualscomputers & electronicsTS128GMSM360

MSM360 –

SATA III 6Gb/s mSATA mini SSD

Transcend MSM360 series are mSATA mini Solid State

Drives (SSDs) with high performance and quality Flash

Memory assembled on a printed circuit board. These

devices feature cutting-edge technology to enhance

product life and data retention. MSM360 is designed

specifically for various applications, such as Ultrabooks,

industrial PCs, vehicle PCs and road surveillance

recording.

Placement

Features

 RoHS compliant

 Power Supply: 3.3V±5%

 Operating Temperature: -0

C to 70

 Built-in 66 bits per 1KByte ECC (Error Correction Code)

functionality ensures highly reliable of data transfer.

 Global wear-leveling algorithm eliminates excessive write

operation and extends product life.

 Supports S.M.A.R.T (Self-defined)

 Supports Security Command

 Supports Device Sleep

 Fully compatible with devices and OS that support the

SATA 6Gb/s standard

 Compliant with JEDEC MO-300B

 Supports Transcend SSD Scope Pro (Optional)

Dimensions

Side

Millimeters

Inches

29.85 +/-0.15

1.06 +/-0.006

26.8 +/-0.15

1.175 +/-0.006

3.85 (Max)

0.152 (Max)

Summary of content (21 pages)

PAGE 1
MSM360 – SATA III 6Gb/s mSATA mini SSD Transcend MSM360 series are mSATA mini Solid State Drives (SSDs) with high performance and quality Flash Memory assembled on a printed circuit board. These devices feature cutting-edge technology to enhance product life and data retention. MSM360 is designed specifically for various applications, such as Ultrabooks, industrial PCs, vehicle PCs and road surveillance recording. Placement Features  RoHS compliant  Power Supply: 3.
PAGE 2
Specifications Physical Specification Form Factor MO-300B Storage Capacities 128GB Dimensions Length 26.8  0.15 mm Width 29.85  0.15 mm Height 3.85 mm (Max) Input Voltage 3.
PAGE 3
Actual Capacity Model P/N User Max. LBA Cylinder Head Sector TS128GMSM360 250,069,680 16,383 16 63 Power Requirements 3.3V  5% Input Voltage Mode TS128GMSM360 Max. (mA) Write(peak) 523 Read(peak) 379 Idle(peak) 115 Devslp(peak) 1.
PAGE 4
Package Dimensions The figure below illustrates the Transcend MSM360 mSATA mini Solid State Disk. All dimensions are in mm. *Note: Tighten mounting screws with no more than 1.0kgf-cm (0.07LB-ft) of torque.
PAGE 5
Pin Assignments Pin No. Pin Name Pin No. 01 NC 02 3.3V 03 NC 04 GND 05 NC 06 NC 07 NC 08 NC 09 GND 10 NC 11 NC 12 NC 13 NC 14 NC 15 GND 16 NC 17 NC 18 GND 19 NC 20 NC 21 GND 22 NC 23 TX+ 24 3.3V 25 TX- 26 GND 27 GND 28 NC 29 GND 30 NC 31 RX- 32 NC 33 RX+ 34 GND 35 GND 36 NC 37 GND 38 NC 39 3.3V 40 GND 41 3.
PAGE 6
Block Diagram SATA Host SATA Interface SSD Controller Flash Interface NAND NAND NAND NAND Flash Flash Flash Flash
PAGE 7
Features Wear Leveling Algorithm The controller supports static/dynamic wear leveling. When the host writes data, the controller will find and use the block with the lowest erase count among the free blocks. This is known as dynamic wear leveling. If the free block erase count is higher than a threshold value plus data blocks, it will activate the static wear leveling, replacing the not so frequently used user blocks with the high erase count free blocks.
PAGE 8
ATA Command Register This table with the following paragraphs summarizes the ATA command set.
PAGE 9
Set Max Address F9h Non-data Set Max Set Password F9h PIO data-out Set Max Lock F9h Non-data Set Max Freeze Lock F9h Non-data Set Max Unlock F9h PIO data-out 48-bit Address Feature Set Flush Cache Ext EAh Non-data Read Sector(s) EXt 24h PIO data-In Read DMA Ext 25h DMA Read Multiple Ext 29h PIO data-In Read Native Max Address Ext 27h Non-data Read Verify Sector(s) Ext 42h Non-data Set Max Address Ext 37h Non-data Write DMA Ext 35h DMA Write Multiple Ext 39h PIO data-
PAGE 10
ATA Command Specifications FLUSH CACHE (E7h) This command is used by the host to request the device to flush the write cache. If there is data in the write cache, that data shall be written to the media. The BSY bit shall remain set to one until all data has been successfully written or an error occurs. IDENTIFY DEVICE (ECh) This commands read out 512Bytes of drive parameter information. Parameter Information consists of the arrangement and value as shown in the following table.
PAGE 11
NOP (00h) The device shall respond with command aborted. For devices implementing the Overlapped feature set, subcommand code 00h in the Features register shall abort any outstanding queue. Subcommand codes 01h through FFh in the Features register shall not affect the status of any outstanding queue. READ BUFFER (E4h) The READ BUFFER command enables the host to read a 512-byte block of data.
PAGE 12
Security Mode Feature Set SECURITY SET PASSWORD (F1h) This command set user password or master password. The host outputs sector data with PIO data-out protocol to indicate the information defined in the following table. Security set Password data content1 Word 0 Content Control word Bit 0 Identifier 0=set user password 1=set master password Bits 1-7 Reserved Bit 8 Master Password Capability 0=High 1=Maximum Bits 9-15 1-16 17 18-255 Reserved Password (32 bytes) Master Password Identifier.
PAGE 13
SECURITY DISABLE PASSWORD (F6h) Disables any previously set user password and cancels the lock. The host transfers 512 bytes of data, as shown in the following table, to the drive. The transferred data contains a user or master password, which the drive compares with the saved password. If they match, the drive cancels the lock. The master password is still saved. It is re-enabled by issuing the SECURITY SET PASSWORD command to re-set a user password.
PAGE 14
Identify Device Information Default Value Word Address Default Value Total Bytes 0 0040h 2 General configuration 1 XXXXh 2 Default number of cylinders 2 0000h 2 Reserved 3 00XXh 2 Default number of heads 4 0000h 2 Obsolete 5 0240h 2 Obsolete 6 XXXXh 2 Default number of sectors per track 7-8 XXXXh 4 Number of sectors per card (Word 7 = MSW, Word 8 = LSW) 9 0000h 2 Obsolete 10-19 XXXXh 20 Serial number in ASCII (Right Justified) 20 0002h 2 Obsolete 21 0002h 2
PAGE 15
Word Address Default Value Total Bytes 68 0078h 2 Minimum PIO transfer cycle time with IORDY flow control 69 4000h 2 Additional supported 70-74 0000h 10 Reserved 75 001Fh 2 Queue depth Data Field Type Information 76 070Eh 2 Serial ATA capacities ．Supports Serial ATA Gen3 ．Supports Serial ATA Gen2 ．Supports Serial ATA Gen1 ．Supports PHY event counters log ．Supports receipt of host initiated power management requests ．Supports Native Command Queuing 77 0080h 2 Serial ATA additional
PAGE 16
9 0001h 2 Data Set Management supported 170-216 XXXXh 94 Reserved 217 0001h 2 Non-rotating media (SSD) 218-221 0000h 8 Reserved 222 107Fh 2 Transport major revision (SATA Rev 3.
PAGE 17
SMART Command Support Value Command Value Command D0h Read Data D5h Read Log D1h Read Attribute Threshold D6h Write Log D2h Enable/Disable Autosave D8h Enable SMART Operations D3h Save Attribute Values D9h Disable SMART Operations D4h Execute OFF-Line Immediate DAh Return Status If the reserved size is below a threshold, status can be read from the Cylinder Register using the Return Status command (DAh).
PAGE 18
SMART DATA Structure BYTE F/V Description 0-1 X Revision code 2-361 X Vendor specific 362 V Off-line data collection status 363 X Self-test execution status byte 364-365 V Total time in seconds to complete off-line data collection activity 366 X Vendor specific 367 F Off-line data collection capability 368-369 F 370 F SMART capability Error logging capability 7-1 Reserved 0 1=Device error logging supported 371 X Vendor specific 372 F Short self-test routine recommended poll
PAGE 19
SMART Attributes The table below shows the vendor specific data in byte 2 to 361 of the 512-byte SMART data Attribute ID (hex) 01 05 MSB LSB 00 MSB 00 00 00 00 00 00 00 00 Read Error Rate Reallocated sectors count 09 LSB - - MSB 00 00 Reserved 0C LSB - - MSB 00 00 A0 LSB - - MSB 00 00 A1 LSB MSB 00 00 00 00 Power Cycle Count Uncorrectable sectors count when read/write Number of valid spare block A2 LSB MSB 00 00 00 00 Number of cache data block A3 LSB MSB 00
PAGE 20
Ordering Information TS XG MSM 360 Transcend Product SATA III mSATA mini SSD Capacity 128GB The above technical information is based on commercial standard data and has been tested to be reliable. However, Transcend makes no warranty, either expressed or implied, as to its accuracy and assumes no liability in connection with the use of this product. Transcend reserves the right to make changes to the specifications at any time without prior notice. USA Los Angeles: E-mail: sales-us@transcend-info.
PAGE 21
Version Date V1.