User`s manual

10. Click the “Close” button to finish and exit.

Linux

1. Plug the SSD18C3 into an available USB port on your Linux computer.

2. Unplug all other USB storage devices from your computer. This is to prevent

accidental format of a different USB drive.

3. Type fdisk /dev/sda (replace /dev/sda with your actual USB device)

4. Press p

5. Press n

6. Press w

7. Type mkfs.ext3 /dev/sda1

8. Go to /etc/fstab and add: /dev/sda1 /mnt/usbdrive auto user,noauto 0 0

9. Type mkdir /mnt/usbdrive

10. Type mount /mnt/usbdrive