User manual

22
Parking Mode: Determine if continuous recording is necessary according to motion detection
after the car engine is switched off (this mode will drain DP220 battery).
Available options: Enable / Disable
Auto Turn Off Display: Set duration for display to automatically turn off after recording begins.
Available options: Never / After 1 min / After 3 mins
Delay Power Off: Schedule the DrivePro to shut down at a certain time.
Available options: Disable / 10 secs / 30 secs
GPS Status: Display the number of GPS satellites received and GPS signal intensity.
Navigation System: Select a navigation system according to your preference.
Available options: GPS / Glonass
Timezone: Set the current timezone.
Date/Time Settings: Set the current date and time.
Date/Time Format: Set the date format to Y/M/D or M/D/Y, and the time format to AM/PM or 24H.
This setting applies to both Time Stamp and System Time.
Language: Set the on-screen display menu language (13 languages are available).
Available options: English /    /    / 日 本 語 / Deutsch / Español / Ελληνικά /
Français / Italiano / Россия / Português / Türkçe / 한국어
Light Frequency: Select the appropriate frequency to avoid flashing A/C light.
Available options: 50Hz / 60Hz
Information: Display the DrivePro’s current firmware version, card capacity and free space.
Format: Format the microSD memory card.
Available options: No / Yes
WARNING: Formatting will erase all the data stored in the card.
Firmware Upgrade: Keep your DrivePro up-to-date with the latest version downloaded from
Transcend website http://www.transcend-info.com/Support/service.
1. After downloading the firmware from Transcend website, decompress it and put it in the
“SYSTEM” folder in the microSD memory card.