Datasheet

ManualsBrandsTRANSCEND ManualsSSDsInternal half slim SSD drive (industry-grade) 16 GB HSD370 Half-Slim Bulk SATA III

HSD370 –SATA III 6Gb/s Half-Slim

SSD

Transcend’s HSD370 series are Half-Slim Solid State

Drives (SSDs) with high performance and quality flash

memory assembled on a printed circuit board. These

SSDs feature cutting-edge technology to enhance

product life and data retention. The HSD370 is

designed specifically for various applications, such as

ultrabooks, industrial PCs, vehicle PCs and road

surveillance recording.

- Power Supply: 5V±5%

- Fully compatible with devices and an OS which support

the SATA III 6.0Gb/s standard

- Non-volatile Flash Memory for outstanding data

retention

- Supports Trim and NCQ command

- Compliant with JEDEC MO-297

Features

 RoHS compliant

 Supports Advanced Global Wear-Leveling and Block

management for reliability

 Built-in ECC (Error Correction Code) functionality

 Features a DDR3 DRAM Cache

 Supports Advanced Garbage Collection

 Supports Enhanced S.M.A.R.T. function

 Advanced power shield to prevent data loss in the

event of a sudden power outage

 Supports DevSleep mode

 Supports Security Command

 Supports Hardware Purge and Hardware Write Protect

(Optional)

 Supports Transcend SSD Scope Pro (Optional)

 Real time full drive encryption with Advanced

Encryption Standard (AES) (Optional)

Summary of content (15 pages)

PAGE 1
HSD370 –SATA III 6Gb/s Half-Slim SSD Features  RoHS compliant Transcend’s HSD370 series are Half-Slim Solid State  Supports Advanced Global Wear-Leveling and Block management for reliability memory assembled on a printed circuit board. These  Built-in ECC (Error Correction Code) functionality SSDs feature cutting-edge technology to enhance  Features a DDR3 DRAM Cache product life and data retention.
PAGE 2
Specifications Physical Specification Form Factor Half-Slim Solid State Drive compatible with MO-297 Storage Capacities 16~256GB Dimensions Length 54.00  0.15 2.130  0.006 inch Width 39.80  0.30 1.570  0.012 inch Height 4.00  0.15 0.157  0.
PAGE 3
Actual Capacity Model P/N User Max.
PAGE 4
Reliability Data Reliability Supports BCH ECC 60 bit per 1024 byte MTBF 1,500,000 hours Endurance (TeraBytes Written) 16G 25 (TB) 32G 45 (TB) 64G 80 (TB) 128G 150 (TB) 256G 280 (TB) *Note: Based on JEDEC JESD218A & 219A standard, Client Application Class with the following scenario: Active use: 40oC, 8hrs/day; Retention use: 30oC Vibration Operating 3.0G, 5 - 800Hz Non-Operating 5.0G, 5 - 800Hz Reference to IEC 60068-2-6 Testing procedures; Operating-Sine wave, 5-800Hz/1 oct., 1.
PAGE 5
Package Dimensions The figure below illustrates the Transcend Half-Slim Solid State Drive. All dimensions are in mm.
PAGE 6
Pin Assignments * Device Activity Signal Pin Layout Pin No. Pin Name Pin No.
PAGE 7
Block Diagram SATA Host SATA Interface DRAM SSD Controller Flash Interface NAND NAND NAND NAND Flash Flash Flash Flash
PAGE 8
Features  Global Wear Leveling – Advanced algorithms to enhance wear-leveling efficiency. Global wear leveling ensures every block has an even erase count. By ensuring all spare blocks in the SSD’s flash chips are managed in a single pool, each block can then have an even erase count. This helps to extend the lifespan of a SSD and to provide the best possible endurance. There are three main processes in global wear -leveling: (1) Record the block erase count and save this in the wear-leveling table.
PAGE 9
may be enabled by simply connecting a switch to the designated pins.  StaticDataRefresh Technology Normally, the ECC engine corrections take place without affecting normal host operations. Over time, the number of bit errors accumulated in the read transaction exceeds the correcting capacity of the ECC engine, which results in corrupted data being sent to the host.
PAGE 10
ATA Command Register This table and the following paragraphs summarize the ATA command set.
PAGE 11
SMART SAVE ATTRIBUTE VALUES SMART WRITE LOG Host Protected Area Feature Set Read Native Max Address Set Max Address Set Max Set Password Set Max Lock Set Max Freeze Lock Set Max Unlock 48-bit Address Feature Set Flush Cache Ext Read Sector(s) Ext Read DMA Ext Read Multiple Ext Read Native Max Address Ext Read Verify Sector(s) Ext Set Max Address Ext Write DMA Ext Write Multiple Ext Write Sector(s) Ext NCQ Feature Set Read FPDMA Queued Write FPDMA Queued Other Data Set Management SEEK B0h B0h Non-data PIO
PAGE 12
SMART Data Structure BYTE F/V Description 0-1 X Revision code 2-361 X Vendor specific 362 V Off-line data collection status 363 X Self-test execution status byte 364-365 V Total time in seconds to complete off-line data collection activity 366 X Vendor specific 367 F Off-line data collection capability 368-369 F 370 F SMART capability Error logging capability 7-1 Reserved 0 1=Device error logging supported 371 X Vendor specific 372 F Short self-test routine recommended poll
PAGE 13
SMART Attributes The table below shows the vendor specific data in byte 2 to 361 of the 512-byte SMART data Attribute Raw Attribute Value ID (hex) Attribute Name 01 MSB 00 00 00 00 00 00 Read Error Rate 05 LSB MSB 00 00 00 00 00 Reallocated sectors count 09 LSB - - MSB 00 00 00 Power-on hours 0C LSB - - MSB 00 00 00 Power Cycle Count A0 LSB - - MSB 00 00 00 Uncorrectable sectors count when read/write A1 LSB MSB 00 00 00 00 00 Number of valid spare block
PAGE 14
Ordering Information TS XG HSD 3 70 Controller TS6500 Transcend Product 3 = MLC Capacity 16GB to 256GB Half-Slim SATA Solid State Drive The technical information above is based on industry standard data and has been tested to be reliable. However, Transcend makes no warranty, either expressed or implied, as to its accuracy and assumes no liability in connection with the use of this product. Transcend reserves the right to make changes to the specifications at any time without prior notice.
PAGE 15
Version Date Revision History Modification Content V1.0 2014/06/04 Initial Release V1.1 2014/08/04 Improved performance V1.2 2014/12/04 Grammar and performance correction V1.3 2015/01/06 Update performance, SMART attributes and Data Reliability V1.4 2015/04/08 Update SMART Attributes V1.5 2015/04/16 Update Package Dimensions V1.