User manual

25
13. Frequently Asked Questions
If you have any question or a problem occurs to your DrivePro™ Body 52, please first check the instructions
listed below before sending your DrivePro™ for repair. If you cannot find any ideal solution to your question
below, please consult your dealer, service center, or local Transcend branch office for further help. You can
also visit Transcend website (http://www.transcend-info.com/) for more FAQs and Technical Support services
(http://www.transcend-info.com/Support/contact_form).
My computer operating system cannot detect my DrivePro™ Body 52
Please check the followings:
1. Is your DrivePro™ Body 52 properly connected to the USB port? If not, unplug and connect it
again. Make sure that both ends of the USB cables are properly connected as shown in the
User’s Manual.
2. Is your DrivePro™ Body 52 connected to the Mac keyboard? If yes, try to plug it in an available
USB port on your Mac Desktop directly.
3. Is the computer’s USB ports enabled? If not, refer to the user’s manual of your computer (or
motherboard) to enable them.
None of the DrivePro™ Body 52 buttons are responding.
Please press the Reset button on the bottom of the DrivePro™ Body 52 with a pointed object such as a
paper clip.
Is the DrivePro™ Body 52 shockproof and waterproof?
The DrivePro™ is IPX4 water resistant and meets rigorous U.S. military drop-test standards*.
*Based on MIL-STD-810G 516.6-Transit Drop Test