User’s Manual SSD Upgrade Kits for Mac JetDriveTM 855/850/825/820 (Version 1.0) Part 1: How to use Time Machine to back up or restore your Mac Part 2: How to install the JetDrive SSD CAUTION! Please take the following electrostatic discharge (ESD) precautions during installation: 1. Work on a static-free surface 2.
Part 1 How to use Time Machine to back up or restore your Mac 2
Step 1 Connect a backup HDD or SSD to your Mac. ` Step 2 Open Time Machine and select the external disk as backup disk. Then check "Show Time Machine in menu bar".
Step 3 Select "Back Up Now" from the Time Machine menu . Step 4 When backup is completed, you can see the summary of the backup.
Step 5 Power off and replace your original SSD to the new JetDrive SSD. Note: For details on how to remove the JetDrive SSD from the enclosure (if applicable), please see Part 2. Step 6 Power on your Mac and long press the "Option" key during startup.
Step 7 Select the backup disk to restore your Mac OS. Step 8 Select "Restore From Time Machine Backup" and click on “Continue”.
Step 9 Select the external Backup disk to restore your Mac OS (same disk as in Step 7) and click on “Continue”. Step 10 Select a backup date and time, and click on “Continue.
Step 11 Choose the Destination (JetDrive) disk and click on "Restore". *Please refer to the Apple website for more information.
Part 2 How to install the JetDrive SSD 9
Step 1 Use Time Machine® to back up your Mac® to an external storage device or to the JetDrive portable SSD. Note: For more details on how to backup and restore your Mac, please see Part 1. Step 2 Use the T5 screwdriver to remove all the screws on the back cover of the enclosure. Step 3 Open the back cover of the enclosure.
Step 4 Use the T5 screwdriver to remove the screw holding the JetDrive SSD. Step 5 Take out the JetDrive SSD. Step 6 Use the P5 screwdriver to remove all the screws on the back cover.
Step 7 Disconnect the battery. Step 8 Use the T5 screwdriver to remove the screw holding the SSD. Step 9 Take out the original SSD.
Step 10 Insert the JetDrive SSD. Step 11 Replace the screw. Step 12 Reconnect the battery.
Step 13 Replace the back cover and all screws. Step 14 Restore your Mac from the external hard drive that contains a backup of your Mac. *You may skip this step if you use the JetDrive to back up your Mac.