Datasheet

ManualsBrandsTranscend Manualscomputers & electronicsTS512MSDOM7H

7P Horizontal Type

SATA Flash Modules

Transcend Information Inc.

V0.1

Description

DescriptionDescription

Description

Serial-ATA is designed as a successor to the

legacy SATA standard. The new standard is

dedicated to achieve higher transfer rate with thinner

cables and more reliable operation than Parallel ATA

interface. SATA Flash Modules is perfect

replacement storage device for PCs, Laptops,

gaming systems, and handheld devices.

Placement

PlacementPlacement

Placement

Features

Features Features

Features

•

RoHS compliant

• Fully compatible with devices and OS that support the

SATA 1.0a 1.5Gbps standard

• 7 pin female SATA connector with latch

•

Connect to motherboard directly without cable

•

Non-volatile Flash Memory for outstanding data

retention

•

The on-chip hardware 13/24 bit BCH-ECC engines can

correct up to 24 bit errors per 1,024 byte data.

•

Support global wear-leveling algorithm which ensures

maximum lifespan.

•

Supports



Ultra DMA Mode 0 to 5



Multiword DMA mode 0 to 2



PIO Mode 0 to 4

• Supports ATA Security Commands

•

Support S.M.A.R.T function (self-definition)

•

Mechanical write-protect switch

• Low Power Consumption

•

Power Supply: 3.3V

5%(UDMA mode 5) / 5.0V

10%(UDMA mode 4 or lower)

•

Shock resistance

Dimensions

DimensionsDimensions

Dimensions

Side Millimeters Inches

40.0

0.3 1.57

0.012

30.0

0.2 1.18

0.008

24.3

0.5 0.96

0.020

* Please refer to Mechanical Drawing

Summary of content (14 pages)

PAGE 1
7P Horizontal Type TS128M~8GSDOM7H SATA Flash Modules Features Description Serial-ATA is designed as a successor to the • RoHS compliant legacy SATA standard. The new standard is • Fully compatible with devices and OS that support the SATA 1.0a 1.5Gbps standard dedicated to achieve higher transfer rate with thinner cables and more reliable operation than Parallel ATA interface. SATA Flash Modules is perfect replacement storage device for PCs, Laptops, gaming systems, and handheld devices.
PAGE 2
7P Horizontal Type TS128M~8GSDOM7H SATA Flash Modules Specifications Physical Specification Form Factor SATA Flash Module Horizontal Type Storage Capacities 128M~8GB Dimensions (mm) Length 40.0 ± 0.3 Width 30.0 ± 0.2 (Not including Write-Protect Switch and SATA connector) Height 24.3 ± 0.5 (refer to mechanical drawing) Input Voltage 5V ± 10% / 3.3V ± 5% Weight 8g Signal: SATA 7 pins female connector with latch Connector Power: 2P 1.
PAGE 3
7P Horizontal Type TS128M~8GSDOM7H SATA Flash Modules Reliability 13bit/1K Byte BCH ECC(2k+64 / 4k+128 byte per page flash) Data Reliability 24bit/1K Byte BCH ECC(4k+208 byte per page flash) Data Retention 10 years Connector Durability 500 mating cycles Performance* Model P/N Read (KB/s) Write (KB/s) Random Read (KB/s) Random Write (KB/s) 2GB SATA Flash Module 53696 25491 51174 10518 * Note : The performance is based on Samsung K9F8G08U0M, single channel.
PAGE 4
7P Horizontal Type TS128M~8GSDOM7H SATA Flash Modules Mechanical Drawing B A Bottom View (Normal Type) C Side View (Normal Type) Transcend Information Inc. 4 V0.
PAGE 5
7P Horizontal Type TS128M~8GSDOM7H SATA Flash Modules A B Bottom View (Reversed Type) C Side View (Reversed Type) Transcend Information Inc. 5 V0.
PAGE 6
7P Horizontal Type TS128M~8GSDOM7H SATA Flash Modules Functionality Pin Assignments Pin No. Pin Name 01 GND 02 A+ 03 04 AGND 05 B- 06 07 B+ GND Disk Active Write-Protect Indicator Disabled Transcend Information Inc. 6 V0.
PAGE 7
P Horizontal Type TS128M~8GSDOM7H SATA Flash Modules Block Block Diagram SATA 7 PIN Connector Data bus PATA Data bus to SATA Control Signal Flash Memory -CE0, -CE1… D0 – D7 -CE0 ~ -CE3 -WE…-RE Others IDE Bridge D0 ~ D7 Flash Disk Controller D8 ~ D15 2 PIN 3.3V/1.8V 5V/3.3V -CE0, -CE1… Voltage Regulator Flash Memory D0 – D7 -CE0 ~ -CE3 -WE…-RE Flash Memory DC Characteristics Parameter Symbol Min. Max. Unit Supply Voltage VCC 2.97 5.
PAGE 8
7P Horizontal Type TS128M~8GSDOM7H SATA Flash Modules Command Set FR SC SN CY DH LBA E5 or 98h – – – – Y – Support Execute Drive Diagnostic 90h – – – – Y – Support 3 Erase Sector C0h – Y Y Y Y Y Support 4 Flush Cache E7h – – – – Y – Support 5 Format Track 50h – Y – Y Y Y Support 6 Identify Device ECh – – – – Y – Support 7 Idle E3h or 97h – Y – – Y – Support 8 Idle Immediate E1h or 95h – – – – Y – Support 9 Initialize Driv
PAGE 9
7P Horizontal Type TS128M~8GSDOM7H SATA Flash Modules 30 Translate Sector 87h – Y Y Y Y Y Support 31 Wear Level F5h – – – – Y – Support 32 Write Buffer E8h – – – – Y – Support 33 Write DMA CAh – Y Y Y Y Y Support 34 Write Multiple C5h – Y Y Y Y Y Support 35 Write Multiple w/o Erase CDh – Y Y Y Y Y Support 36 Write Sector(s) 30h or 31h – Y Y Y Y Y Support 37 Write Sector(s) w/o Erase 38h – Y Y Y Y Y Support 38 Write Verify 3
PAGE 10
7P Horizontal Type TS128M~8GSDOM7H SATA Flash Modules SMART Command Set SMART Command Set SMART Feature Register Values D0h Read Data D5h Read Log D1h Read Attribute Threshold D6h Write Log D2h Enable/Disable Autosave D8h Enable SMART Operations D3h Save Attribute Values D9h Disable SMART Operations D4h Execute OFF-LINE Immediate DAh Return Status 1. If reserved size is below the Threshold, the status can be read from Cylinder register by Return Status command (DAh).
PAGE 11
7P Horizontal Type TS128M~8GSDOM7H 511 V SATA Flash Modules Data structure checksum F=the content of the byte is fixed and does not change. V=the content of the byte is variable and may change depending on the state of the device or the commands executed by the device. X=the content of the byte is vendor specific and may be fixed or variable. R=the content of the byte is reserved and shall be zero. * 4 Byte value : [MSB] [2] [1] [LSB] Transcend Information Inc. 11 V0.
PAGE 12
7P Horizontal Type TS128M~8GSDOM7H SATA Flash Modules ID Table Table Information Word Address Default Value Total Bytes 044Ah 2 General configuration – Bit Significant with ATA-7 definitions.
PAGE 13
7P Horizontal Type TS128M~8GSDOM7H SATA Flash Modules Word Address Default Value Total Bytes 68 0078h 2 Minimum PIO transfer cycle time with IORDY flow control (120ns) 69-79 0000h 22 Reserved 80 0080h 2 Major revision number Data Field Type Information 81 0000h 2 Mimor revision number 82 742Bh 2 Command sets supported 0 83 5008h 2 Command sets supported 1 84 4003h 2 Command sets supported 2 85 XXXXh 2 Command sets Enable 0 86 XXXXh 2 Command sets Enable 1 87 4003h
PAGE 14
7P Horizontal Type TS128M~8GSDOM7H SATA Flash Modules Ordering Information TS XG SDOM XX Connector type 7H = 7pin SATA horizontal 22V = 22pin SATA vertical 22H = 22pin SATA horizontal SATA Flash Module Transcend Product Capacity: 128M-8G 1. The above technical information is based on industry standard data and has been tested to be reliable. However, Transcend makes no warranty, either expressed or implied, as to its accuracy and assumes no liability in connection with the use of this product.