User manual

7
3-3 Charging the DrivePro™ Body 30
Before use, please ensure that the battery is fully charged. Charge the DrivePro™ Body 30 via the
bundled 3.5mm to USB cable. A solid orange LED light is visible while charging; the orange LED light
will turn off when fully charged.
To charge the DrivePro™ Body 30, you can either:
1. Connect the bundled 3.5mm to USB cable to a wall outlet with the included adapter
2. Connect the bundled 3.5mm to USB cable to a computer
3. Connect the DrivePro™ Body 30 to Transcend’s Docking Station (Optional)
WARNING:
Do not use the 3.5mm to USB cable on other devices.
4. Recording Videos
4-1 Buffering Mode
To power on and start Buffering mode, long press the button; you will hear 1 beep; the recording
indicator will flash blue when powering on and then be solid in Buffering mode.
To power off, long press the button again; you will hear 1 beep, the LED light will then turn off.
To switch between Buffering mode and Recording mode, quickly press the button twice, you will
hear 2 beeps.
Recording in Buffering mode can greatly save storage space as the files are not recorded to the
internal storage.