User’s Manual Body Camera DrivePro™ Body 30 2020/08 (Version 2.
Table of Contents 1. Introduction ...................................................................................................................... 2 2. System Requirements...................................................................................................... 3 3. Getting Started ................................................................................................................. 4 3-1 Function Buttons...........................................................................
1. Introduction Transcend’s DrivePro™ Body 30 is an easy-to-operate wearable video camera that is tailor-made for police officers, security guards and other professionals to capture real time videos and photos of events. The Wi-Fi network allows live streaming to your smartphone and adjusting the function settings using the DrivePro™ Body App.
2. System Requirements System requirements for connecting the DrivePro™ Body 30 to a computer and for using the DrivePro™ Body Toolbox: A desktop or a laptop with a working USB port Windows® 7 Windows® 8 Windows® 8.
3.
Function Buttons Description Power Button Long press once: Power on/off Short press twice: Switch between Buffering Mode and Recording Mode Snapshot / Infrared LED Button Long press once: Turn on/off Infrared LED Short press once: Take a snapshot; in Recording Mode, a note will be added to the recoding file Press the button and the button at the same time for 5 seconds to format and power off the device.
Top View 2 Status Indicator Recording LED Status Definition Flashing Memory almost full Flashing Bluetooth pairing Solid Buffering mode when checking status Solid Silent mode Flashing Recording mode when checking status Connected to computer LED Status Definition Flashing Transferring data Front View Recording Indicator LED Status Definition Flashing Powering on Solid Buffering mode Flashing Recording mode Solid Connected to Computer 6
3-3 Charging the DrivePro™ Body 30 Before use, please ensure that the battery is fully charged. Charge the DrivePro™ Body 30 via the bundled 3.5mm to USB cable. A solid orange LED light is visible while charging; the orange LED light will turn off when fully charged. To charge the DrivePro™ Body 30, you can either: 1. Connect the bundled 3.5mm to USB cable to a wall outlet with the included adapter 2. Connect the bundled 3.5mm to USB cable to a computer 3.
4-2 Recording Mode button twice while in Buffering mode; you will hear 2 To start Recording mode, quickly press the beeps, and the recording indicator will flash red. Video files recorded in Recording mode are saved in the “VIDEO” folder and will be overwritten with loop recording enabled (This function is disabled by default and can be enabled using the DrivePro™ Body Toolbox). One video file is saved for every 3 minutes of recording (by default).
6. Using the DrivePro™ Body App Developed for iOS and Android devices, the free DrivePro™ Body App allows you to wirelessly adjust the settings of the camera and to take snapshots, or live stream video on your smart device. 6-1 Downloading and Installing the App 1. Search for DrivePro™ Body App from the App Store or Google Play. 2. Download and install the DrivePro™ Body App . Once the installation is complete, the App will be displayed on the home screen of your device.
3. Long press the Status button until you hear a beep. Tap Next on the App to connect to a Bluetooth device. You will hear 3 beeps. You can now take snapshots, switch recording modes, or adjust settings via the App. 4. Tap Live View or Browser and connect to “DPB30_XXXXXX” Wi-Fi with the default password “12345678”.
6-3 DrivePro™ Body App Home Device List Menu Battery Status Storage Status Video Length Microphone Resolution GPS Stealth Mode Snapshot Microphone Recording Mode Browser Live View 11
Note: The camera stops recording when you tap Browser or Settings after tapping using the App, the front LED turns solid blue/red. The camera will resume recording when you tap Home. 6-4 Playing Videos and Browsing Photos 1. To play videos and browse photos, tap Browser on the Homepage, or tap top left corner first then tap 2. Browser. Tap to play the videos recorded or browse the photos.
6-5 Settings Tap on the top left corner first then tap to enter the Settings menu. In the Settings menu, you can adjust the settings of video, device, Wi-Fi and the system. Menu Options VIDEO Resolution: Set the resolution/quality for video recording. Available options: 1080p/60fps / 1080p/30fps / 720p/30fps / 480p Video Length: Set the recording length of each recorded video file. Available options: 3 mins / 5 mins / 10 mins Microphone: Turn on/off the microphone during video recording.
Light Frequency: Select the appropriate frequency to avoid flashing A/C light. Available options: 50Hz / 60Hz Default Recording Mode: Select the default recording mode. Available options: Buffering mode / Recording mode Buffered Video Length: Set the buffered video length to record footage that happens prior to switching to Recording mode. Available options: 30 secs / 60 secs / 90 secs / 120 secs (default) WARNING: 1.
Wi-Fi: Set the Wi-Fi password to connect wirelessly to DrivePro™ Body 30 (default password is 12345678). SYSTEM Time Synchronized: Sync the DrivePro™ Body time with your smart device. Firmware Version: Tap to upgrade the firmware to the latest version. Download Path: Set the download path of the files. DRIVEPRO™ BODY About: Display the Firmware version, End-User License Agreement, and Open Source Statement. WARNING: NEVER remove the power cord while the firmware is being upgraded. 1.
7. Using the DrivePro™ Body Toolbox Software DrivePro™ Body Toolbox is a video file management software which simplifies the settings of the camera. The software features a user-friendly interface that allows Windows users to set the basic functions of the DrivePro™ Body camera. 1. Download the installation files from: http://www.transcend-info.com/downloads 2. Install DrivePro™ Body Toolbox software on your desktop or laptop.
To start backing up, click on . 7-2 Settings On the Settings page, you can adjust the device settings, video settings, and video stamp. Device Settings Sync time with PC: When clicking the button, the device will synchronize time with the current time of the PC. Stealth Mode: Turn on/off the stealth mode. When the stealth mode is on, the light indicators and buzzer are disabled. LED Indicator: Turn on/off the light indicators during video recording.
Video Settings Resolution: Set the resolution/quality for video recording. Available options: 1080p/60fps / 1080p/30fps / 720p/30fps / 480p Video Format: Set the recording format of each recorded video file. Available options: MOV / MP4 Loop Recording: Overwrite the old video files with new ones. Available options: OFF / ON Video Length: Set the recording length of each recorded video file.
Video Stamp Video Stamp: Display the time of the event being recorded and the video label. Available options: OFF / ON Date Format: Set the date format. Available options: YY/MM/DD or MM/DD/YY or DD/MM/YY Time Format: Select the 24-hour or 12-hour AM/PM time format. Available options: 24HR / AM/PM Watermark: Display the watermark.
Note: Formatting the disk and resetting the device will permanently remove all data. Firmware Upgrade: Upgrade your firmware to the latest version available. Password: Set a password for your device. If password is set, you will need to enter the password to proceed the following operation. Format Disk: Format your device. Reset Device: Reset all settings to default or erase all contents and settings.
7-4 File Manager On the File Manager page, you can search and manage your videos and photos, or edit photos. Click on to delete the video or photo. Click on to download the video or photo. Click on to add, delete, or edit the Owner and Category of your files.
7-5 Preference Click on on top of the page to adjust the settings of the DrivePro™ Body Toolbox. Check the available options below according to your preference.
8. Docking Station (Optional) Transcend’s DPD6N networked docking station is designed specifically for the DrivePro™ Body 30 and offers a complete charging, data upload, and camera management solution. Ideal for large-scale deployments of DrivePro™ Body 30 body cameras, it allows for simultaneous charging and network-based data and camera management. Files may also be shared to an external storage device via the USB 3.0 port. Installation Guide 1. Plug in the power adapter and power on. 2.
3. Connect the other Ethernet cable from the WAN port to an active Internet port. 4. Change IP address to http://10.10.0.100. 5. Open browser and link to http://10.10.0.1. 6. Enter default user name “admin” and password “12345678” to log in. 7. Complete instructions on the web page.
8. Charge the DrivePro™ Body and upload data simultaneously.
9.
10. IP67 Protection The camera body of the DrivePro™ Body 30 is rated at IP67, offering splash, water, and dust resistance. However, splash, water, and dust resistance are not permanent conditions and resistance might decrease as a result of normal wear. Liquid damage is not covered under warranty. WARNING: DrivePro™ Body 30 is not water resistant when connected to the power cable. Failure caused from incorrect use is not covered by the limited warranty.
11. Package Contents DrivePro™ Body 30 Adapter 3.
Clip & Velcro holders Note: When removing the DrivePro™ Body from the holder, please pull from left and right side. When reassembling, make sure the DrivePro™ Body is securely attached to the holder.
12. Specifications DPB30 DPB30 (Models produced before 2020. 07) (Models produced after 2020. 07) Connection Interface Storage Lens Dimensions USB 2.0 Internal 64GB eMMC storage Internal 64GB storage F/2.0, 130° wide angle 95.9 mm (L) × 52.2 mm (W)× 27.6 mm (H) 3.78” (L) x 2.06” (W) x 1.09” (H) Weight 130g (4.6 oz) Battery Li-Polymer 3120mAh Power Supply Input: AC100V-240V, 50-60Hz, 0.4A Max Output: DC5V 2A Recording Life Video Format Resolution / Frame Rate Up to 12 hours* MOV(H.264) MP4(H.
13. Frequently Asked Questions If you have any question or a problem occurs to your DrivePro™ Body 30, please first check the instructions listed below before sending your DrivePro™ for repair. If you cannot find any ideal solution to your question below, please consult your dealer, service center, or local Transcend branch office for further help. You can also visit Transcend website (http://www.transcend-info.com/) for more FAQs and Technical Support services (http://www.transcend-info.
14. Recycling and Environmental Protection Recycling the Product (WEEE): Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. When you see the crossed-out wheel bin symbol attached to a product, it means that the product is covered by the European Directive 2002/96/EC: Never dispose of your product with other household waste. Please inform yourself about the local rules on the separate collection of electrical and electronic products.
15. Two-year Limited Warranty This product is covered by a Two-year Limited Warranty. Should your product fail under normal use within two years from the original purchase date, Transcend will provide warranty service pursuant to the terms of the Transcend Warranty Policy. Proof of the original purchase date is required for warranty service. Transcend will inspect the product and in its sole discretion repair or replace it with a refurbished product or functional equivalent.
16. GNU General Public License (GPL) Disclosure Firmware incorporated into this product and/or software used for this product may include third party copyrighted software licensed under the GPL (hereinafter referred to as “GPL Software”).
assign or otherwise dispose of the Licensed Software or use the Licensed Software in any commercial hosted or service bureau environment; (c) reverse engineer, decompile, disassemble or attempt to discover the source code for or any trade secrets related to the Licensed Software, except and only to the extent that such activity is expressly permitted by applicable law notwithstanding this limitation; (d) adapt, modify, alter, translate or create any derivative works of the Licensed Software; (e) remove, alt
CONNECTION WITH THE USE, PERFORMANCE OR ACCURACY OF THE LICENSED SOFTWARE OR WITH THE DELAY OR INABILITY TO USE THE LICENSED SOFTWARE, OR THE PRODUCT WITH WHICH THE LICENSED SOFTWARE IS ASSOCIATED, WHETHER BASED ON CONTRACT, TORT, NEGLIGENCE, STRICT LIABILITY OR OTHERWISE, EVEN IF TRANSCEND HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. 8. Limitation of Liability.
18. Federal Communications Commission (FCC) Statement This device complies with Part 15 FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received including interference that may cause undesired operation. This Equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules.
