User's Manual

PAWS Enforcement Module Kit
The kit includes the following items:
• PAWS™ Enforcement Module
• Suction cups
• Clip
• Handlebar clamp
You need to provide two (2) AA batteries for operation. Non-rechargeable lithium batteries are
recommended for maximum life. Some high capacity alkaline batteries and rechargeable batteries
will also be sufficient but have shorter lifetimes.
Battery Installation
The Enforcement Module battery
compartment is
on the back of the device.
The battery cover slides out, revealing
the
location for two side-by-side
batteries. The
correct battery polarity
is shown inside the
compartment.
Battery
compartment
Door (removed)
Enforcement Module Installation
You can operate the EM as a handheld unit. With the optional parts included in the kit, you can
also attach the unit to:
• A vehicle visor with a clip;
• Inside the
windshield with either double-sided adhesive or suction cups; or
• Motorcycle
handlebars with a clamp.
PAWS ENFORCEMENT MODULE Installation and Operation v1.0 | Publication Number 16-0015-001 Page 2 of 6