User's Manual

www.RoperMobile.com CMU056-A1 29
Return To Table of Contents
Inserting PC or SDIO Cards
Turn the unit off.
Using a Flathead screwdriver, loosen the 2
screws located at the top of your unit on Endcap.
Remove the Endcap slowly and place to the
side.
Note: The screws will remain inside the Endcap.
WARNING
The Adaptable Endcap with GPS option has a
short communication cable between Endcap
and unit. Keep Endcap close to unit not to break
or disconnect the cable.
Note: You do not need to disconnect the GPS cable
to insert the PC or SDIO cards.
Slide card into the appropriate socket. (PC or
SDIO).
a) SDIO Slot
b) PC Slot
Turn stopper to secure cards into place.
c) SDIO Stopper
d) PC Stopper
Note: The extended Endcap also comes with two
(2) foams to secure PC or SDIO cards into place
when stoppers cannot be used.
Replace the door to its original
position and tighten screws.
1.
2.
3.
•
4.
5.
6.
USING PC & SDIO CARDS (CONTINUED)
Operation Guide
b
a
c
b