User's Manual

www.RoperMobile.com CMU056-A1 17
Return To Table of Contents
Getting Started
CHARGING THE BATTERY
The installation requires the Modular Charger
CSCE300-NA (North America - 110V / 120V
AC Adapter) or the CSCE300-EU (Europe
220V) or the CSCE300-UK (United Kingdom
220 V).
Insert modular charger into round connector
(a) at the back of the cradle.
Connect the Modular Charger to the wall
outlet.
Insert unit into cradle.
Note:
The CE3240B Battery Status indicator will
turn red in the next 5 seconds indicating that
charging is now in progress. The light will turn
green when charging is complete. Charging
may take up to 3 hours.
If the unit was turned off, it should turn back
on after a few seconds or after 2 to 3 minutes
if the main battery charge has been very low
for some time. Processing will resume exactly
where it was interrupted once re-charging
starts.
1.
2.
3.
4.
•
•
CSCE300-NA,
CSCE300-EU,
CECE300-UK
(a)